IDEAS home Printed from https://ideas.repec.org/a/oup/ijlctc/v18y2023ip384-391..html
   My bibliography  Save this article

Improving a solar collector's efficiency by selecting the composition of the working fluid used

Author

Listed:
  • Bader Alshuraiaan

Abstract

The study's purpose was to determine the efficiency, as well as the energy and exergy analysis of the vacuum tube solar collector when using a mixture of water with Fe3O4 nanoparticles and multiwall carbon nanotubes in the selected percentage ratio as the working fluid. By varying the concentration of Fe3O4 nanoparticles in the working fluid from 0.05 to 0.15 wt.%, it was found that the maximum efficiency is achieved at a Fe3O4 content equal to 0.1 wt.%. At this concentration, the ratio of Fe3O4 and multiwall carbon nanotubes in the mixture varied from 4:1 to 1:4. It was found that the Fe3O4/multiwall carbon nanotubes ratio (1:4) can increase the efficiency of the solar collector up to 84%. Exergy analysis performed showed that water without the addition of nanoparticles Fe3O4 and multiwall carbon nanotubes was characterized by the maximum values of exergy destruction and entropy generation at any level of solar radiation, and water with the addition of nanoparticles Fe3O4/multiwall carbon nanotubes in a ratio of 1:4 was characterized by the minimum values of exergy destruction and entropy generation.

Suggested Citation

  • Bader Alshuraiaan, 2023. "Improving a solar collector's efficiency by selecting the composition of the working fluid used," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 18, pages 384-391.
    • Handle: RePEc:oup:ijlctc:v:18:y:2023:i::p:384-391.
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1093/ijlct/ctad027
    Download Restriction: Access to full text is restricted to subscribers.
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sharafeldin, M.A. & Gróf, Gyula, 2019. "Efficiency of evacuated tube solar collector using WO3/Water nanofluid," Renewable Energy, Elsevier, vol. 134(C), pages 453-460.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sadeghi, Gholamabbas & Najafzadeh, Mohammad & Ameri, Mehran, 2020. "Thermal characteristics of evacuated tube solar collectors with coil inside: An experimental study and evolutionary algorithms," Renewable Energy, Elsevier, vol. 151(C), pages 575-588.
    2. Evangelisti, Luca & De Lieto Vollaro, Roberto & Asdrubali, Francesco, 2019. "Latest advances on solar thermal collectors: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 114(C), pages 1-1.
    3. Sheikholeslami, M. & Farshad, Seyyed Ali & Shafee, Ahmad & Babazadeh, Houman, 2021. "Performance of solar collector with turbulator involving nanomaterial turbulent regime," Renewable Energy, Elsevier, vol. 163(C), pages 1222-1237.
    4. Mashhour A. Alazwari & Mohammad Reza Safaei, 2021. "Non-Isothermal Hydrodynamic Characteristics of a Nanofluid in a Fin-Attached Rotating Tube Bundle," Mathematics, MDPI, vol. 9(10), pages 1-24, May.
    5. Sarafraz, M.M. & Safaei, M.R., 2019. "Diurnal thermal evaluation of an evacuated tube solar collector (ETSC) charged with graphene nanoplatelets-methanol nano-suspension," Renewable Energy, Elsevier, vol. 142(C), pages 364-372.
    6. Singh, Inderjeet & Vardhan, Sachit, 2021. "Experimental investigation of an evacuated tube collector solar air heater with helical inserts," Renewable Energy, Elsevier, vol. 163(C), pages 1963-1972.
    7. Natividade, Pablo Sampaio Gomes & de Moraes Moura, Gabriel & Avallone, Elson & Bandarra Filho, Enio Pedone & Gelamo, Rogério Valentim & Gonçalves, Júlio Cesar de Souza Inácio, 2019. "Experimental analysis applied to an evacuated tube solar collector equipped with parabolic concentrator using multilayer graphene-based nanofluids," Renewable Energy, Elsevier, vol. 138(C), pages 152-160.
    8. Atul Bhattad & Vinay Atgur & Boggarapu Nageswar Rao & N. R. Banapurmath & T. M. Yunus Khan & Chandramouli Vadlamudi & Sanjay Krishnappa & A. M. Sajjan & R. Prasanna Shankara & N. H. Ayachit, 2023. "Review on Mono and Hybrid Nanofluids: Preparation, Properties, Investigation, and Applications in IC Engines and Heat Transfer," Energies, MDPI, vol. 16(7), pages 1-40, March.
    9. Minjung Lee & Yunchan Shin & Honghyun Cho, 2020. "Performance Evaluation of Flat Plate and Vacuum Tube Solar Collectors by Applying a MWCNT/Fe 3 O 4 Binary Nanofluid," Energies, MDPI, vol. 13(7), pages 1-17, April.
    10. Gao, Datong & Li, Jing & Ren, Xiao & Hu, Tianxiang & Pei, Gang, 2022. "A novel direct steam generation system based on the high-vacuum insulated flat plate solar collector," Renewable Energy, Elsevier, vol. 197(C), pages 966-977.
    11. Cui, Yuanlong & Zhu, Jie & Zoras, Stamatis & Zhang, Jizhe, 2021. "Comprehensive review of the recent advances in PV/T system with loop-pipe configuration and nanofluid," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    12. Tembhare, Saurabh P. & Barai, Divya P. & Bhanvase, Bharat A., 2022. "Performance evaluation of nanofluids in solar thermal and solar photovoltaic systems: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 153(C).
    13. Sadeghi, Gholamabbas & Pisello, Anna Laura & Safarzadeh, Habibollah & Poorhossein, Miad & Jowzi, Mohammad, 2020. "On the effect of storage tank type on the performance of evacuated tube solar collectors: Solar radiation prediction analysis and case study," Energy, Elsevier, vol. 198(C).
    14. Moucun Yang & Sa Wang & Yuezhao Zhu & Robert A. Taylor & M.A. Moghimi & Yinfeng Wang, 2020. "Thermal Stability and Performance Testing of Oil-based CuO Nanofluids for Solar Thermal Applications," Energies, MDPI, vol. 13(4), pages 1-16, February.
    15. Farshad, Seyyed Ali & Sheikholeslami, M., 2019. "Nanofluid flow inside a solar collector utilizing twisted tape considering exergy and entropy analysis," Renewable Energy, Elsevier, vol. 141(C), pages 246-258.
    16. Yıldırım, Erdal & Yurddaş, Ali, 2021. "Assessments of thermal performance of hybrid and mono nanofluid U-tube solar collector system," Renewable Energy, Elsevier, vol. 171(C), pages 1079-1096.
    17. López-Núñez, Oscar A. & Alfaro-Ayala, J. Arturo & Ramírez-Minguela, J.J. & Cano-Banda, Fernando & Ruiz-Camacho, B. & Belman-Flores, Juan Manuel, 2022. "Numerical analysis of the thermo-hydraulic performance and entropy generation rate of a water-in-glass evacuated tube solar collector using TiO2 water-based nanofluid and only water as working fluids," Renewable Energy, Elsevier, vol. 197(C), pages 953-965.
    18. Bhowmik, Mrinal & Muthukumar, P. & Anandalakshmi, R., 2019. "Experimental based multilayer perceptron approach for prediction of evacuated solar collector performance in humid subtropical regions," Renewable Energy, Elsevier, vol. 143(C), pages 1566-1580.
    19. Kaya, Hüseyin & Alkasem, Mohanad & Arslan, Kamil, 2020. "Effect of nanoparticle shape of Al2O3/Pure Water nanofluid on evacuated U-Tube solar collector efficiency," Renewable Energy, Elsevier, vol. 162(C), pages 267-284.
    20. Gholipour, Shayan & Afrand, Masoud & Kalbasi, Rasool, 2020. "Improving the efficiency of vacuum tube collectors using new absorbent tubes arrangement: Introducing helical coil and spiral tube adsorbent tubes," Renewable Energy, Elsevier, vol. 151(C), pages 772-781.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:oup:ijlctc:v:18:y:2023:i::p:384-391.. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Oxford University Press (email available below). General contact details of provider: https://academic.oup.com/ijlct .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.