IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v8y2016i9p870-d77217.html
   My bibliography  Save this article

Development of Hybrid Model for Estimating Construction Waste for Multifamily Residential Buildings Using Artificial Neural Networks and Ant Colony Optimization

Author

Listed:
  • Dongoun Lee

    (Department of Architectural Engineering, Dongseo University, 47 Jurye-ro, Sasang-gu 47011, Busan, Korea)

  • Seungho Kim

    (School of Architecture, Yeungnam University, 280 Daehak-ro, Gyeongsan-si 38541, Gyeongbuk, Korea)

  • Sangyong Kim

    (School of Architecture, Yeungnam University, 280 Daehak-ro, Gyeongsan-si 38541, Gyeongbuk, Korea)

Abstract

Due to the increasing costs of construction waste disposal, an accurate estimation of the amount of construction waste is a key factor in a project’s success. Korea has been burdened by increasing construction waste as a consequence of the growing number of construction projects and a lack of construction waste management (CWM) strategies. One of the problems associated with predicting the amount of waste is that there are no suitable estimation strategies currently available. Therefore, we developed a hybrid estimation model to predict the quantity and cost of waste in the early stage of construction. The proposed approach can be used to address cost overruns and improve CWM in the subsequent stages of construction. The proposed hybrid model uses artificial neural networks (ANNs) and ant colony optimization (ACO). It is expected to provide an accurate waste estimate by applying historical data from multifamily residential buildings.

Suggested Citation

  • Dongoun Lee & Seungho Kim & Sangyong Kim, 2016. "Development of Hybrid Model for Estimating Construction Waste for Multifamily Residential Buildings Using Artificial Neural Networks and Ant Colony Optimization," Sustainability, MDPI, vol. 8(9), pages 1-14, September.
    • Handle: RePEc:gam:jsusta:v:8:y:2016:i:9:p:870-:d:77217
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/8/9/870/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/8/9/870/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. C. S. Poon & Ann Yu & L. Jaillon, 2004. "Reducing building waste at construction sites in Hong Kong," Construction Management and Economics, Taylor & Francis Journals, vol. 22(5), pages 461-470.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Murat Gunduz & Ayman Fahmi Naser, 2017. "Cost Based Value Stream Mapping as a Sustainable Construction Tool for Underground Pipeline Construction Projects," Sustainability, MDPI, vol. 9(12), pages 1-20, November.
    2. Zhijia You & Chen Wu & Lianqiong Zheng & Lingjun Feng, 2020. "An Informatization Scheme for Construction and Demolition Waste Supervision and Management in China," Sustainability, MDPI, vol. 12(4), pages 1-18, February.
    3. Niluka Domingo & Heshani M. Edirisinghe & Ravindu Kahandawa & Gayan Wedawatta, 2024. "Generalised Linear Modelling for Construction Waste Estimation in Residential Projects: Case Study in New Zealand," Sustainability, MDPI, vol. 16(5), pages 1-14, February.
    4. Liang Qiao & Doudou Liu & Xueliang Yuan & Qingsong Wang & Qiao Ma, 2020. "Generation and Prediction of Construction and Demolition Waste Using Exponential Smoothing Method: A Case Study of Shandong Province, China," Sustainability, MDPI, vol. 12(12), pages 1-12, June.
    5. Xiaochuan Shi & Lei Wu & Xiaoliang Meng, 2017. "A New Optimization Model for the Sustainable Development: Quadratic Knapsack Problem with Conflict Graphs," Sustainability, MDPI, vol. 9(2), pages 1-10, February.
    6. Zhikun Ding & Mengjie Shi & Chen Lu & Zezhou Wu & Dan Chong & Wenyan Gong, 2019. "Predicting Renovation Waste Generation Based on Grey System Theory: A Case Study of Shenzhen," Sustainability, MDPI, vol. 11(16), pages 1-13, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Benson Teck Heng Lim & Bee Lan Oo & Charlie McLeod & Pengqi Yang, 2024. "Institutional and Actor Network Perspectives of Waste Management in Australia: Is the Construction Industry Prepared for a Circular Economy?," Sustainability, MDPI, vol. 16(2), pages 1-21, January.
    2. Esa, Mohd Reza & Halog, Anthony & Rigamonti, Lucia, 2017. "Strategies for minimizing construction and demolition wastes in Malaysia," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 219-229.
    3. Wang, Jiayuan & Li, Zhengdao & Tam, Vivian W.Y., 2014. "Critical factors in effective construction waste minimization at the design stage: A Shenzhen case study, China," Resources, Conservation & Recycling, Elsevier, vol. 82(C), pages 1-7.
    4. Rosaria E.C. Amaral & Joel Brito & Matt Buckman & Elicia Drake & Esther Ilatova & Paige Rice & Carlos Sabbagh & Sergei Voronkin & Yewande S. Abraham, 2020. "Waste Management and Operational Energy for Sustainable Buildings: A Review," Sustainability, MDPI, vol. 12(13), pages 1-21, July.
    5. Baldwin, Andrew & Poon, Chi-Sun & Shen, Li-Yin & Austin, Simon & Wong, Irene, 2009. "Designing out waste in high-rise residential buildings: Analysis of precasting methods and traditional construction," Renewable Energy, Elsevier, vol. 34(9), pages 2067-2073.
    6. R. Navon & O. Berkovich, 2006. "An automated model for materials management and control," Construction Management and Economics, Taylor & Francis Journals, vol. 24(6), pages 635-646.
    7. Ademilade Aboginije & Clinton Aigbavboa & Wellington Thwala, 2021. "A Holistic Assessment of Construction and Demolition Waste Management in the Nigerian Construction Projects," Sustainability, MDPI, vol. 13(11), pages 1-14, June.
    8. Lu, Weisheng & Yuan, Hongping, 2010. "Exploring critical success factors for waste management in construction projects of China," Resources, Conservation & Recycling, Elsevier, vol. 55(2), pages 201-208.
    9. Lanfang, Liu & Issam, Srour & Chong, Wai K. & Christopher, Hermreck, 2015. "Integrating G2G, C2C and resource flow analysis into life cycle assessment framework: A case of construction steel’s resource loop," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 143-152.
    10. Li, Jingru & Ding, Zhikun & Mi, Xuming & Wang, Jiayuan, 2013. "A model for estimating construction waste generation index for building project in China," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 20-26.
    11. Li, Jingru & Tam, Vivian W.Y. & Zuo, Jian & Zhu, Jiaolan, 2015. "Designers’ attitude and behaviour towards construction waste minimization by design: A study in Shenzhen, China," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 29-35.
    12. Mok, Ken L. & Han, Seung H. & Choi, Seokjin, 2014. "The implementation of clean development mechanism (CDM) in the construction and built environment industry," Energy Policy, Elsevier, vol. 65(C), pages 512-523.
    13. Niluka Domingo & Heshani M. Edirisinghe & Ravindu Kahandawa & Gayan Wedawatta, 2024. "Generalised Linear Modelling for Construction Waste Estimation in Residential Projects: Case Study in New Zealand," Sustainability, MDPI, vol. 16(5), pages 1-14, February.
    14. Seungho Cho & Seunguk Na, 2017. "The Reduction of CO 2 Emissions by Application of High-Strength Reinforcing Bars to Three Different Structural Systems in South Korea," Sustainability, MDPI, vol. 9(9), pages 1-24, September.
    15. Musa Mohammed & Nasir Shafiq & Ali Elmansoury & Al-Baraa Abdulrahman Al-Mekhlafi & Ehab Farouk Rached & Noor Amila Zawawi & Abdulrahman Haruna & Aminu Darda’u Rafindadi & Muhammad Bello Ibrahim, 2021. "Modeling of 3R (Reduce, Reuse and Recycle) for Sustainable Construction Waste Reduction: A Partial Least Squares Structural Equation Modeling (PLS-SEM)," Sustainability, MDPI, vol. 13(19), pages 1-22, September.
    16. Chau, C.K. & Hui, W.K. & Ng, W.Y. & Powell, G., 2012. "Assessment of CO2 emissions reduction in high-rise concrete office buildings using different material use options," Resources, Conservation & Recycling, Elsevier, vol. 61(C), pages 22-34.
    17. Li, Mei & Yang, Jay, 2014. "Critical factors for waste management in office building retrofit projects in Australia," Resources, Conservation & Recycling, Elsevier, vol. 93(C), pages 85-98.
    18. Zhang, Xiaoling & Wu, Yuzhe & Shen, Liyin, 2012. "Application of low waste technologies for design and construction: A case study in Hong Kong," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2973-2979.
    19. Reza Esmaeilifar & Mohammad Iranmanesh & Mohd Wira Mohd Shafiei & Sunghyup Sean Hyun, 2020. "Effects of low carbon waste practices on job satisfaction of site managers through job stress," Review of Managerial Science, Springer, vol. 14(1), pages 115-136, February.
    20. Lu, Weisheng & Chen, Xi & Peng, Yi & Shen, Liyin, 2015. "Benchmarking construction waste management performance using big data," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 49-58.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:8:y:2016:i:9:p:870-:d:77217. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.