IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i11p6559-d825590.html
   My bibliography  Save this article

Experimental Investigation of Mass Transfer Intensification for CO 2 Capture by Environment-Friendly Water Based Nanofluid Solvents in a Rotating Packed Bed

Author

Listed:
  • Farhad Ghadyanlou

    (Faculty of Petroleum, Gas and Petrochemical Engineering (FPGPE), Persian Gulf University, Bushehr 75169-13817, Iran)

  • Ahmad Azari

    (Faculty of Petroleum, Gas and Petrochemical Engineering (FPGPE), Persian Gulf University, Bushehr 75169-13817, Iran)

  • Ali Vatani

    (School of Chemical Engineering and Institute of LNG, College of Engineering, University of Tehran, Tehran 14179-35840, Iran)

Abstract

In this research, two intensification approaches for CO 2 capture via a rotating packed bed (RPB) and nanofluids were examined simultaneously to maximize the experimental mass transfer coefficient. The two intensification approaches were done by using water as a green, environmentally friendly absorption solvent and as the base fluid for preparing nanofluids and also by using centrifugal acceleration in an RPB. Physicosorption of CO 2 in an RPB was carried out by applying Al 2 O 3 , TiO 2 , and SiO 2 nanofluids to intensify the mass transfer in water, and the operation parameters such as the angular speed of the rotor, concentration and type of nanoparticles, gas and liquid flow rates, and CO 2 concentration in mass transfer intensification were evaluated and several nanofluids were selected to survey investigate how they affect the mass transfer at low pressure. The results show that the Al 2 O 3 nanofluid was more effective than other nanofluids and that the 40 nm nanofluid of this type was more efficient than the 20 nm size. Therefore, a correlation is proposed in this paper for liquid volumetric mass transfer coefficient prediction that includes the microconvection of nanoparticles and surface tension.

Suggested Citation

  • Farhad Ghadyanlou & Ahmad Azari & Ali Vatani, 2022. "Experimental Investigation of Mass Transfer Intensification for CO 2 Capture by Environment-Friendly Water Based Nanofluid Solvents in a Rotating Packed Bed," Sustainability, MDPI, vol. 14(11), pages 1-19, May.
    • Handle: RePEc:gam:jsusta:v:14:y:2022:i:11:p:6559-:d:825590
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/11/6559/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/14/11/6559/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Li, Bingyun & Duan, Yuhua & Luebke, David & Morreale, Bryan, 2013. "Advances in CO2 capture technology: A patent review," Applied Energy, Elsevier, vol. 102(C), pages 1439-1447.
    2. Zhao, Bingtao & Tao, Wenwen & Zhong, Mei & Su, Yaxin & Cui, Guomin, 2016. "Process, performance and modeling of CO2 capture by chemical absorption using high gravity: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 44-56.
    3. Lee, Jae Won & Kang, Yong Tae, 2013. "CO2 absorption enhancement by Al2O3 nanoparticles in NaCl aqueous solution," Energy, Elsevier, vol. 53(C), pages 206-211.
    4. Yu, Cheng-Hsiu & Chen, Ming-Tsz & Chen, Hao & Tan, Chung-Sung, 2016. "Effects of process configurations for combination of rotating packed bed and packed bed on CO2 capture," Applied Energy, Elsevier, vol. 175(C), pages 269-276.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ahmed M. Abed & Ali AlArjani & Laila F. Seddek & Samia ElAttar, 2023. "Modify the Injection Machine Mechanism to Enhance the Recycling of Plastic Waste Mixed with MHD Nanoparticles," Sustainability, MDPI, vol. 15(3), pages 1-36, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Farhad Ghadyanlou & Ahmad Azari & Ali Vatani, 2021. "A Review of Modeling Rotating Packed Beds and Improving Their Parameters: Gas–Liquid Contact," Sustainability, MDPI, vol. 13(14), pages 1-42, July.
    2. Yoro, Kelvin O. & Daramola, Michael O. & Sekoai, Patrick T. & Armah, Edward K. & Wilson, Uwemedimo N., 2021. "Advances and emerging techniques for energy recovery during absorptive CO2 capture: A review of process and non-process integration-based strategies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    3. Amaris, Carlos & Bourouis, Mahmoud & Vallès, Manel, 2014. "Passive intensification of the ammonia absorption process with NH3/LiNO3 using carbon nanotubes and advanced surfaces in a tubular bubble absorber," Energy, Elsevier, vol. 68(C), pages 519-528.
    4. Lee, Sung-Wook & Park, Jong-Soo & Lee, Chun-Boo & Lee, Dong-Wook & Kim, Hakjoo & Ra, Ho Won & Kim, Sung-Hyun & Ryi, Shin-Kun, 2014. "H2 recovery and CO2 capture after water–gas shift reactor using synthesis gas from coal gasification," Energy, Elsevier, vol. 66(C), pages 635-642.
    5. Cheng, Chin-hung & Li, Kangkang & Yu, Hai & Jiang, Kaiqi & Chen, Jian & Feron, Paul, 2018. "Amine-based post-combustion CO2 capture mediated by metal ions: Advancement of CO2 desorption using copper ions," Applied Energy, Elsevier, vol. 211(C), pages 1030-1038.
    6. Sun, Alexander Y., 2020. "Optimal carbon storage reservoir management through deep reinforcement learning," Applied Energy, Elsevier, vol. 278(C).
    7. Vega, F. & Baena-Moreno, F.M. & Gallego Fernández, Luz M. & Portillo, E. & Navarrete, B. & Zhang, Zhien, 2020. "Current status of CO2 chemical absorption research applied to CCS: Towards full deployment at industrial scale," Applied Energy, Elsevier, vol. 260(C).
    8. Zhang, Minkai & Guo, Yincheng, 2013. "Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution," Applied Energy, Elsevier, vol. 111(C), pages 142-152.
    9. Ganapathy, Harish & Steinmayer, Sascha & Shooshtari, Amir & Dessiatoun, Serguei & Ohadi, Michael M. & Alshehhi, Mohamed, 2016. "Process intensification characteristics of a microreactor absorber for enhanced CO2 capture," Applied Energy, Elsevier, vol. 162(C), pages 416-427.
    10. Wei-Jen Huang & Kai-Jung Kao & Li-Lian Liu & Chi-Wen Liao & Yin-Lung Han, 2018. "An Assessment of Direct Dissolved Inorganic Carbon Injection to the Coastal Region: A Model Result," Sustainability, MDPI, vol. 10(4), pages 1-10, April.
    11. Zhang, Xiaowen & Zhang, Xin & Liu, Helei & Li, Wensheng & Xiao, Min & Gao, Hongxia & Liang, Zhiwu, 2017. "Reduction of energy requirement of CO2 desorption from a rich CO2-loaded MEA solution by using solid acid catalysts," Applied Energy, Elsevier, vol. 202(C), pages 673-684.
    12. Budzianowski, Wojciech M., 2016. "A review of potential innovations for production, conditioning and utilization of biogas with multiple-criteria assessment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1148-1171.
    13. Itskos, Grigorios & Grammelis, Panagiotis & Scala, Fabrizio & Pawlak-Kruczek, Halina & Coppola, Antonio & Salatino, Piero & Kakaras, Emmanuel, 2013. "A comparative characterization study of Ca-looping natural sorbents," Applied Energy, Elsevier, vol. 108(C), pages 373-382.
    14. Ganapathy, H. & Shooshtari, A. & Dessiatoun, S. & Alshehhi, M. & Ohadi, M., 2014. "Fluid flow and mass transfer characteristics of enhanced CO2 capture in a minichannel reactor," Applied Energy, Elsevier, vol. 119(C), pages 43-56.
    15. Peng, Hao & Lin, Lingnan & Ding, Guoliang, 2015. "Influences of primary particle parameters and surfactant on aggregation behavior of nanoparticles in nanorefrigerant," Energy, Elsevier, vol. 89(C), pages 410-420.
    16. Zhang, Weidong & Jin, Xianhang & Tu, Weiwei & Ma, Qian & Mao, Menglin & Cui, Chunhua, 2017. "Development of MEA-based CO2 phase change absorbent," Applied Energy, Elsevier, vol. 195(C), pages 316-323.
    17. Míguez, José Luis & Porteiro, Jacobo & Pérez-Orozco, Raquel & Patiño, David & Gómez, Miguel Ángel, 2020. "Biological systems for CCS: Patent review as a criterion for technological development," Applied Energy, Elsevier, vol. 257(C).
    18. Balint Simon, 2023. "Material flows and embodied energy of direct air capture: A cradle‐to‐gate inventory of selected technologies," Journal of Industrial Ecology, Yale University, vol. 27(3), pages 646-661, June.
    19. Ali Saleh Bairq, Zain & Gao, Hongxia & Huang, Yufei & Zhang, Haiyan & Liang, Zhiwu, 2019. "Enhancing CO2 desorption performance in rich MEA solution by addition of SO42−/ZrO2/SiO2 bifunctional catalyst," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    20. Lee, Jae Won & Kim, Seonggon & Torres Pineda, Israel & Kang, Yong Tae, 2021. "Review of nanoabsorbents for capture enhancement of CO2 and its industrial applications with design criteria," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:11:p:6559-:d:825590. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.