IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i6p3089-d515271.html
   My bibliography  Save this article

Parameterization, Modeling, and Validation in Real Conditions of an External Gear Pump

Author

Listed:
  • Miquel Torrent

    (Department of Fluid Mechanics, CATMech, Universitat Politécnica de Catalunya, Campus Terrassa, Colom 7, 08222 Terrassa, Spain)

  • Pedro Javier Gamez-Montero

    (Department of Fluid Mechanics, CATMech, Universitat Politécnica de Catalunya, Campus Terrassa, Colom 7, 08222 Terrassa, Spain)

  • Esteban Codina

    (Department of Fluid Mechanics, CATMech, Universitat Politécnica de Catalunya, Campus Terrassa, Colom 7, 08222 Terrassa, Spain)

Abstract

This article presents a methodology for predicting the fluid dynamic behavior of a gear pump over its operating range. Complete pump parameterization was carried out through standard tests, and these parameters were used to create a bond graph model to simulate the behavior of the unit. This model was experimentally validated under working conditions in field tests. To carry this out, the pump was used to drive the auxiliary movements of a drilling machine, and the experimental data were compared with a simulation of the volumetric behavior under the same conditions. This paper aims to describe a method for characterizing any hydrostatic pump as a “black box” model predicting its behavior in any operating condition. The novelty of this method is based on the correspondence between the variation of the parameters and the internal changes of the unit when working in real conditions, that is, outside a test bench.

Suggested Citation

  • Miquel Torrent & Pedro Javier Gamez-Montero & Esteban Codina, 2021. "Parameterization, Modeling, and Validation in Real Conditions of an External Gear Pump," Sustainability, MDPI, vol. 13(6), pages 1-20, March.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:6:p:3089-:d:515271
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/6/3089/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/6/3089/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Paolo Casoli & Fabio Scolari & Massimo Rundo & Antonio Lettini & Manuel Rigosi, 2020. "CFD Analyses of Textured Surfaces for Tribological Improvements in Hydraulic Pumps," Energies, MDPI, vol. 13(21), pages 1-22, November.
    2. Massimo Rundo, 2017. "Models for Flow Rate Simulation in Gear Pumps: A Review," Energies, MDPI, vol. 10(9), pages 1-32, August.
    3. Gijsbert Toet & Jack Johnson & John Montague & Ken Torres & José Garcia-Bravo, 2019. "The Determination of the Theoretical Stroke Volume of Hydrostatic Positive Displacement Pumps and Motors from Volumetric Measurements," Energies, MDPI, vol. 12(3), pages 1-15, January.
    4. Xinran Zhao & Andrea Vacca, 2019. "Theoretical Investigation into the Ripple Source of External Gear Pumps," Energies, MDPI, vol. 12(3), pages 1-26, February.
    5. Divya Thiagarajan & Andrea Vacca, 2017. "Mixed Lubrication Effects in the Lateral Lubricating Interfaces of External Gear Machines: Modelling and Experimental Validation," Energies, MDPI, vol. 10(1), pages 1-20, January.
    6. Emma Frosina & Adolfo Senatore & Manuel Rigosi, 2017. "Study of a High-Pressure External Gear Pump with a Computational Fluid Dynamic Modeling Approach," Energies, MDPI, vol. 10(8), pages 1-20, July.
    7. Pedro Javier Gamez-Montero & Esteve Codina & Robert Castilla, 2019. "A Review of Gerotor Technology in Hydraulic Machines," Energies, MDPI, vol. 12(12), pages 1-44, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Barbara Zardin & Emiliano Natali & Massimo Borghi, 2019. "Evaluation of the Hydro—Mechanical Efficiency of External Gear Pumps," Energies, MDPI, vol. 12(13), pages 1-19, June.
    2. Alessandro Corvaglia & Massimo Rundo & Paolo Casoli & Antonio Lettini, 2021. "Evaluation of Tooth Space Pressure and Incomplete Filling in External Gear Pumps by Means of Three-Dimensional CFD Simulations," Energies, MDPI, vol. 14(2), pages 1-16, January.
    3. Pedro Javier Gamez-Montero & Ernest Bernat-Maso, 2022. "Taguchi Techniques as an Effective Simulation-Based Strategy in the Design of Numerical Simulations to Assess Contact Stress in Gerotor Pumps," Energies, MDPI, vol. 15(19), pages 1-24, September.
    4. Valeriy Sanchugov & Pavel Rekadze, 2022. "New Method to Determine the Dynamic Fluid Flow Rate at the Gear Pump Outlet," Energies, MDPI, vol. 15(9), pages 1-29, May.
    5. Yu Dai & Feiyue Ma & Xiang Zhu & Qiao Su & Xiaozhou Hu, 2019. "Evaluation and Optimization of the Oil Jet Lubrication Performance for Orthogonal Face Gear Drive: Modelling, Simulation and Experimental Validation," Energies, MDPI, vol. 12(10), pages 1-23, May.
    6. Gabriele Muzzioli & Luca Montorsi & Andrea Polito & Andrea Lucchi & Alessandro Sassi & Massimo Milani, 2021. "About the Influence of Eco-Friendly Fluids on the Performance of an External Gear Pump," Energies, MDPI, vol. 14(4), pages 1-26, February.
    7. Gianluca Marinaro & Emma Frosina & Adolfo Senatore, 2021. "A Numerical Analysis of an Innovative Flow Ripple Reduction Method for External Gear Pumps," Energies, MDPI, vol. 14(2), pages 1-22, January.
    8. Piotr Osiński & Grzegorz Chruścielski & Leszek Korusiewicz, 2021. "Theoretical and Experimental Fatigue Strength Calculations of Lips Compensating Circumferential Backlash in Gear Pumps," Energies, MDPI, vol. 14(1), pages 1-14, January.
    9. Timm Hieronymus & Thomas Lobsinger & Gunther Brenner, 2020. "Investigation of the Internal Displacement Chamber Pressure of a Rotary Vane Pump," Energies, MDPI, vol. 13(13), pages 1-19, June.
    10. Andrea Vacca, 2018. "Energy Efficiency and Controllability of Fluid Power Systems," Energies, MDPI, vol. 11(5), pages 1-6, May.
    11. Dmitry Eskin, 2022. "On CFD-Assisted Research and Design in Engineering," Energies, MDPI, vol. 15(23), pages 1-3, December.
    12. Massimo Rundo, 2017. "Models for Flow Rate Simulation in Gear Pumps: A Review," Energies, MDPI, vol. 10(9), pages 1-32, August.
    13. Hongfang Lu & Xiaonan Wu & Kun Huang, 2018. "Study on the Effect of Reciprocating Pump Pipeline System Vibration on Oil Transportation Stations," Energies, MDPI, vol. 11(1), pages 1-23, January.
    14. Pedro Javier Gamez-Montero & Esteve Codina & Robert Castilla, 2019. "A Review of Gerotor Technology in Hydraulic Machines," Energies, MDPI, vol. 12(12), pages 1-44, June.
    15. Massimo Rundo & Giorgio Altare & Paolo Casoli, 2019. "Simulation of the Filling Capability in Vane Pumps," Energies, MDPI, vol. 12(2), pages 1-18, January.
    16. Paolo Casoli & Fabio Scolari & Massimo Rundo, 2021. "Modelling and Validation of Cavitating Orifice Flow in Hydraulic Systems," Sustainability, MDPI, vol. 13(13), pages 1-15, June.
    17. Paolo Casoli & Carlo Maria Vescovini & Massimo Rundo, 2023. "One-Dimensional Fluid Dynamic Modeling of a Gas Bladder Hydraulic Damper for Pump Flow Pulsation," Energies, MDPI, vol. 16(8), pages 1-18, April.
    18. Piotr Osiński & Adam Deptuła & Marian A. Partyka, 2022. "Hydraulic Tests of the PZ0 Gear Micropump and the Importance Rank of Its Design and Operating Parameters," Energies, MDPI, vol. 15(9), pages 1-27, April.
    19. Sangbeom Woo & Timothy Opperwall & Andrea Vacca & Manuel Rigosi, 2017. "Modeling Noise Sources and Propagation in External Gear Pumps," Energies, MDPI, vol. 10(7), pages 1-20, July.
    20. Huican Luo & Peijian Zhou & Lingfeng Shu & Jiegang Mou & Haisheng Zheng & Chenglong Jiang & Yantian Wang, 2022. "Energy Performance Curves Prediction of Centrifugal Pumps Based on Constrained PSO-SVR Model," Energies, MDPI, vol. 15(9), pages 1-19, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:6:p:3089-:d:515271. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.