IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i6p1648-d517784.html
   My bibliography  Save this article

Determination of the Theoretical and Actual Working Volume of a Hydraulic Motor—Part II (The Method Based on the Characteristics of Effective Absorbency of the Motor)

Author

Listed:
  • Pawel Sliwinski

    (Faculty of Mechanical Engineering and Ship Technology, Gdansk University of Technology, 80-233 Gdansk, Poland)

Abstract

In this article, the second method of determination of the theoretical and actual working volume of a hydraulic motor is described. The proposed new method is based on the characteristics of effective absorbency of the motor. The effective absorbency has been defined as the ratio of flow rate in a motor to the rotational speed of the motor’s shaft. It has been shown that the effective absorbency is a nonlinear function of the rotational speed and nonlinear function of the pressure drop in the motor’s working chambers. Furthermore, it has been proven that the actual working volume of a motor is a function of a third degree of pressure drop in the motor’s working chamber. The actual working volume should be taken to assess the mechanical and volumetric energy losses in the motor. Furthermore, the influence of the flowmeter location in the measurement system and the compressibility of liquid on the result of the theoretical and actual working volume calculation was also taken into account and is described in this article. The differences in the assessment of the volumetric efficiency assuming the theoretical and actual working volume was also shown.

Suggested Citation

  • Pawel Sliwinski, 2021. "Determination of the Theoretical and Actual Working Volume of a Hydraulic Motor—Part II (The Method Based on the Characteristics of Effective Absorbency of the Motor)," Energies, MDPI, vol. 14(6), pages 1-20, March.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:6:p:1648-:d:517784
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/6/1648/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/6/1648/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Gijsbert Toet & Jack Johnson & John Montague & Ken Torres & José Garcia-Bravo, 2019. "The Determination of the Theoretical Stroke Volume of Hydrostatic Positive Displacement Pumps and Motors from Volumetric Measurements," Energies, MDPI, vol. 12(3), pages 1-15, January.
    2. Pawel Sliwinski, 2020. "Determination of the Theoretical and Actual Working Volume of a Hydraulic Motor," Energies, MDPI, vol. 13(22), pages 1-23, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ryszard Dindorf & Jakub Takosoglu & Piotr Wos, 2021. "Advances in Fluid Power Systems," Energies, MDPI, vol. 14(24), pages 1-6, December.
    2. Pawel Sliwinski & Piotr Patrosz, 2021. "Methods of Determining Pressure Drop in Internal Channels of a Hydraulic Motor," Energies, MDPI, vol. 14(18), pages 1-26, September.
    3. Pedro Javier Gamez-Montero & Ernest Bernat-Maso, 2022. "Taguchi Techniques as an Effective Simulation-Based Strategy in the Design of Numerical Simulations to Assess Contact Stress in Gerotor Pumps," Energies, MDPI, vol. 15(19), pages 1-24, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huican Luo & Peijian Zhou & Lingfeng Shu & Jiegang Mou & Haisheng Zheng & Chenglong Jiang & Yantian Wang, 2022. "Energy Performance Curves Prediction of Centrifugal Pumps Based on Constrained PSO-SVR Model," Energies, MDPI, vol. 15(9), pages 1-19, May.
    2. Pawel Sliwinski & Piotr Patrosz, 2021. "Methods of Determining Pressure Drop in Internal Channels of a Hydraulic Motor," Energies, MDPI, vol. 14(18), pages 1-26, September.
    3. Barbara Zardin & Emiliano Natali & Massimo Borghi, 2019. "Evaluation of the Hydro—Mechanical Efficiency of External Gear Pumps," Energies, MDPI, vol. 12(13), pages 1-19, June.
    4. Pawel Sliwinski, 2020. "Determination of the Theoretical and Actual Working Volume of a Hydraulic Motor," Energies, MDPI, vol. 13(22), pages 1-23, November.
    5. Piotr Osiński & Grzegorz Chruścielski & Leszek Korusiewicz, 2021. "Theoretical and Experimental Fatigue Strength Calculations of Lips Compensating Circumferential Backlash in Gear Pumps," Energies, MDPI, vol. 14(1), pages 1-14, January.
    6. Miquel Torrent & Pedro Javier Gamez-Montero & Esteban Codina, 2021. "Parameterization, Modeling, and Validation in Real Conditions of an External Gear Pump," Sustainability, MDPI, vol. 13(6), pages 1-20, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:6:p:1648-:d:517784. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.