IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i19p10618-d642420.html
   My bibliography  Save this article

Study on the Effect and Mechanism of Alkali–Silica Reaction Expansion in Glass Concrete

Author

Listed:
  • Da Huang

    (Guangxi Key Laboratory of New Energy and Building Energy Saving, Guilin 541004, China
    College of Civil and Architecture Engineering, Guilin University of Technology, Guilin 541004, China)

  • Pengliang Sun

    (School of Chemical Science and Technology, Yunnan University, Kunming 650091, China)

  • Pengfei Gao

    (Guangxi Key Laboratory of New Energy and Building Energy Saving, Guilin 541004, China
    College of Civil and Architecture Engineering, Guilin University of Technology, Guilin 541004, China)

  • Guangyan Liu

    (Guangxi Key Laboratory of New Energy and Building Energy Saving, Guilin 541004, China
    College of Civil and Architecture Engineering, Guilin University of Technology, Guilin 541004, China)

  • Yuanhao Wang

    (Guangxi Key Laboratory of New Energy and Building Energy Saving, Guilin 541004, China
    College of Civil and Architecture Engineering, Guilin University of Technology, Guilin 541004, China)

  • Xuandong Chen

    (Guangxi Key Laboratory of New Energy and Building Energy Saving, Guilin 541004, China
    College of Civil and Architecture Engineering, Guilin University of Technology, Guilin 541004, China)

Abstract

The suppression of ASR expansion hazards of glass concrete has always been a key and hot issue in the research of glass concrete. According to the ASTM C1260-14 fast mortar rod method, glass sand and glass powder act as fine aggregate and auxiliary cementing material, respectively. The changes in expansion rate with different amounts of glass sand content and different particle sizes of glass powder in mortar rods were compared, and the effects of glass sand content and the glass powder particle size on the expansion of ASR were analyzed. SEM was used to compare and analyze the microstructure of mortar rods to explore the mechanism of ASR expansion of glass concrete, and the results showed that the addition of glass powder had a certain inhibitory effect on ASR expansion. The larger the particle size of glass powder was, the better the inhibition effect on ASR expansion and the longer its duration. Compared with the three groups of experiments of 0–13 μm, 13–38 μm, and 38–75 μm, it was found that the influence of the glass powder particle size on the expansion of ASR was weaker than that of dosage. The inhibitory effect of glass powder on ASR expansion is related to the fact that glass powder is more involved in pozzolanic reaction in the early hydration process.

Suggested Citation

  • Da Huang & Pengliang Sun & Pengfei Gao & Guangyan Liu & Yuanhao Wang & Xuandong Chen, 2021. "Study on the Effect and Mechanism of Alkali–Silica Reaction Expansion in Glass Concrete," Sustainability, MDPI, vol. 13(19), pages 1-10, September.
  • Handle: RePEc:gam:jsusta:v:13:y:2021:i:19:p:10618-:d:642420
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/19/10618/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/13/19/10618/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Memon, Shazim Ali, 2014. "Phase change materials integrated in building walls: A state of the art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 870-906.
    2. Mehrab Nodehi & Vahid Mohamad Taghvaee, 2022. "Alkali-Activated Materials and Geopolymer: a Review of Common Precursors and Activators Addressing Circular Economy," Circular Economy and Sustainability,, Springer.
    3. Shi, Caijun & Zheng, Keren, 2007. "A review on the use of waste glasses in the production of cement and concrete," Resources, Conservation & Recycling, Elsevier, vol. 52(2), pages 234-247.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mingli Li & Guoqing Gui & Zhibin Lin & Long Jiang & Hong Pan & Xingyu Wang, 2018. "Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings," Sustainability, MDPI, vol. 10(8), pages 1-23, July.
    2. Farel, Romain & Yannou, Bernard & Ghaffari, Asma & Leroy, Yann, 2013. "A cost and benefit analysis of future end-of-life vehicle glazing recycling in France: A systematic approach," Resources, Conservation & Recycling, Elsevier, vol. 74(C), pages 54-65.
    3. Bimaganbetova, Madina & Memon, Shazim Ali & Sheriyev, Almas, 2020. "Performance evaluation of phase change materials suitable for cities representing the whole tropical savanna climate region," Renewable Energy, Elsevier, vol. 148(C), pages 402-416.
    4. Qian, Tingting & Li, Jinhong & Min, Xin & Deng, Yong & Guan, Weimin & Ma, Hongwen, 2015. "Polyethylene glycol/mesoporous calcium silicate shape-stabilized composite phase change material: Preparation, characterization, and adjustable thermal property," Energy, Elsevier, vol. 82(C), pages 333-340.
    5. Ren, Miao & Zhao, Hua & Gao, Xiaojian, 2022. "Effect of modified diatomite based shape-stabilized phase change materials on multiphysics characteristics of thermal storage mortar," Energy, Elsevier, vol. 241(C).
    6. Ikutegbe, Charles A. & Farid, Mohammed M., 2020. "Application of phase change material foam composites in the built environment: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    7. Islam, Md. Parvez & Morimoto, Tetsuo, 2018. "Advances in low to medium temperature non-concentrating solar thermal technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2066-2093.
    8. Rostami, Sara & Afrand, Masoud & Shahsavar, Amin & Sheikholeslami, M. & Kalbasi, Rasool & Aghakhani, Saeed & Shadloo, Mostafa Safdari & Oztop, Hakan F., 2020. "A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage," Energy, Elsevier, vol. 211(C).
    9. Aditya, L. & Mahlia, T.M.I. & Rismanchi, B. & Ng, H.M. & Hasan, M.H. & Metselaar, H.S.C. & Muraza, Oki & Aditiya, H.B., 2017. "A review on insulation materials for energy conservation in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1352-1365.
    10. Stephen Babajide Olabimtan & Mohammad Ali Mosaberpanah, 2023. "The Implementation of a Binary Blend of Waste Glass Powder and Coal Bottom Ash as a Partial Cement Replacement toward More Sustainable Mortar Production," Sustainability, MDPI, vol. 15(11), pages 1-30, May.
    11. Ramakrishnan, Sayanthan & Wang, Xiaoming & Sanjayan, Jay & Wilson, John, 2017. "Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events," Applied Energy, Elsevier, vol. 194(C), pages 410-421.
    12. Zeng, Cheng & Liu, Shuli & Shukla, Ashish, 2017. "Adaptability research on phase change materials based technologies in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 145-158.
    13. Yi Zhang & Hongzhi Cui & Waiching Tang & Guochen Sang & Hong Wu, 2017. "Effect of Summer Ventilation on the Thermal Performance and Energy Efficiency of Buildings Utilizing Phase Change Materials," Energies, MDPI, vol. 10(8), pages 1-17, August.
    14. Memon, Shazim Ali & Cui, H.Z. & Zhang, Hang & Xing, Feng, 2015. "Utilization of macro encapsulated phase change materials for the development of thermal energy storage and structural lightweight aggregate concrete," Applied Energy, Elsevier, vol. 139(C), pages 43-55.
    15. Amaral, C. & Vicente, R. & Marques, P.A.A.P. & Barros-Timmons, A., 2017. "Phase change materials and carbon nanostructures for thermal energy storage: A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1212-1228.
    16. Gutierrez, Andrea & Ushak, Svetlana & Galleguillos, Hector & Fernandez, Angel & Cabeza, Luisa F. & Grágeda, Mario, 2015. "Use of polyethylene glycol for the improvement of the cycling stability of bischofite as thermal energy storage material," Applied Energy, Elsevier, vol. 154(C), pages 616-621.
    17. Cao, Zhi & Shen, Lei & Zhao, Jianan & Liu, Litao & Zhong, Shuai & Yang, Yan, 2016. "Modeling the dynamic mechanism between cement CO2 emissions and clinker quality to realize low-carbon cement," Resources, Conservation & Recycling, Elsevier, vol. 113(C), pages 116-126.
    18. Henckens, M.L.C.M. & Driessen, P.P.J. & Worrell, E., 2015. "Towards a sustainable use of primary boron. Approach to a sustainable use of primary resources," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 9-18.
    19. Jad Bawab & Jamal Khatib & Hilal El-Hassan & Lateef Assi & Mehmet Serkan Kırgız, 2021. "Properties of Cement-Based Materials Containing Cathode-Ray Tube (CRT) Glass Waste as Fine Aggregates—A Review," Sustainability, MDPI, vol. 13(20), pages 1-23, October.
    20. Zeyad Amin Al-Absi & Mohd Hafizal Mohd Isa & Mazran Ismail, 2020. "Phase Change Materials (PCMs) and Their Optimum Position in Building Walls," Sustainability, MDPI, vol. 12(4), pages 1-25, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:19:p:10618-:d:642420. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.