IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i10p5340-d551969.html
   My bibliography  Save this article

Plastic Waste Management: A Review of Existing Life Cycle Assessment Studies

Author

Listed:
  • Hatem Alhazmi

    (National Center for Environmental Technology, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia)

  • Faris H. Almansour

    (Carbon Capture, Utilization, and Storage Center (CCUS), King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia)

  • Zaid Aldhafeeri

    (National Center for Environmental Technology, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia)

Abstract

Life Cycle Assessment (LCA) is a tool that can help to quantify the impacts of different processes to facilitate comparison and decision making. There are many potential methods for managing plastic waste, but it can be difficult to determine which methods are preferable in terms of environmental impact. Suitable existing LCA studies are identified through a screening process and the methodologies used and their outputs are compared. When undertaking an LCA, the researchers must define their scope and select their parameters, according to their aims and context, which leads to a wide variation in the approach taken. In this study, six parameters have been considered to analyze research progress in these fields regarding LCA, i.e., goals and scope, functional units, impact assessment categories, system boundaries, geographical context, and uncertainty analysis. These studies include the similar type of different studies considering plastic waste recycling, each taking a different approach to defining the system boundaries, revealing how the decision to include or exclude factors such as transport can have a significant impact on the outcomes. Additionally, compared to these similar studies on mixed-plastic waste management, different available options are used to quantitatively compare the impact outcomes, revealing how the context and parameter selection can affect the results. This review aims to highlight the prospect of LCA during the development of a waste management framework as an efficient waste recycling tool and recommend a research gap for the development of an improved management framework in the future.

Suggested Citation

  • Hatem Alhazmi & Faris H. Almansour & Zaid Aldhafeeri, 2021. "Plastic Waste Management: A Review of Existing Life Cycle Assessment Studies," Sustainability, MDPI, vol. 13(10), pages 1-21, May.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:10:p:5340-:d:551969
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/10/5340/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/10/5340/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Katarzyna Joachimiak-Lechman & Dawid Garstecki & Marcin Konopczyński & Anna Lewandowska, 2020. "Implementation of Life Cycle Based Tools in the Circular Economy Context—Case Study of Plastic Waste," Sustainability, MDPI, vol. 12(23), pages 1-15, November.
    2. David Lazarevic & Emmanuelle Aoustin & Nicolas Buclet & Nils Brandt, 2010. "Plastic Waste Management in the context of a European recycling society," Post-Print halshs-00584531, HAL.
    3. Eleonora Foschi & Sara Zanni & Alessandra Bonoli, 2020. "Combining Eco-Design and LCA as Decision-Making Process to Prevent Plastics in Packaging Application," Sustainability, MDPI, vol. 12(22), pages 1-13, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abdulmajeed Almadhi & Abdelhakim Abdelhadi & Rakan Alyamani, 2023. "Moving from Linear to Circular Economy in Saudi Arabia: Life-Cycle Assessment on Plastic Waste Management," Sustainability, MDPI, vol. 15(13), pages 1-22, July.
    2. Dong Mu & Shaoqing Zhang, 2021. "The Impact of Reward–Penalty Policy on Different Recycling Modes of Recyclable Resources in Residential Waste," Sustainability, MDPI, vol. 13(14), pages 1-18, July.
    3. Hassan Ghanem & Safwan Chahal & Jamal Khatib & Adel Elkordi, 2023. "Experimental and Numerical Investigation of the Flexural Behavior of Mortar Beams Strengthened with Recycled Plastic Mesh," Sustainability, MDPI, vol. 15(7), pages 1-25, March.
    4. Justus Poschmann & Vanessa Bach & Matthias Finkbeiner, 2023. "Decarbonization Potentials for Automotive Supply Chains: Emission-Intensity Pathways of Carbon-Intensive Hotspots of Battery Electric Vehicles," Sustainability, MDPI, vol. 15(15), pages 1-20, July.
    5. Noura Al-Mazrouei & Ali H. Al-Marzouqi & Waleed Ahmed, 2022. "Characterization and Sustainability Potential of Recycling 3D-Printed Nylon Composite Wastes," Sustainability, MDPI, vol. 14(17), pages 1-13, August.
    6. Sabah Mariyam & Logan Cochrane & Shifa Zuhara & Gordon McKay, 2022. "Waste Management in Qatar: A Systematic Literature Review and Recommendations for System Strengthening," Sustainability, MDPI, vol. 14(15), pages 1-23, July.
    7. Luca Di Paolo & Simona Abbate & Eliseo Celani & Davide Di Battista & Giovanni Candeloro, 2022. "Carbon Footprint of Single-Use Plastic Items and Their Substitution," Sustainability, MDPI, vol. 14(24), pages 1-16, December.
    8. Ma. Cristine Concepcion D. Ignacio & Kurt A. Rosentrater & Dirk E. Maier, 2023. "Estimating Environmental and Economic Impacts of Hermetic Bag Storage Technology," Sustainability, MDPI, vol. 15(20), pages 1-19, October.
    9. Jonas Keller & Carla Scagnetti & Stefan Albrecht, 2022. "The Relevance of Recyclability for the Life Cycle Assessment of Packaging Based on Design for Life Cycle," Sustainability, MDPI, vol. 14(7), pages 1-13, March.
    10. Ichiro Tsuchimoto & Yuya Kajikawa, 2022. "Recycling of Plastic Waste: A Systematic Review Using Bibliometric Analysis," Sustainability, MDPI, vol. 14(24), pages 1-39, December.
    11. Rahaf Ajaj & Wisam Abu Jadayil & Hamna Anver & Eman Aqil, 2022. "A Revision for the Different Reuses of Polyethylene Terephthalate (PET) Water Bottles," Sustainability, MDPI, vol. 14(8), pages 1-14, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jonas Keller & Carla Scagnetti & Stefan Albrecht, 2022. "The Relevance of Recyclability for the Life Cycle Assessment of Packaging Based on Design for Life Cycle," Sustainability, MDPI, vol. 14(7), pages 1-13, March.
    2. Markus Gall & Andrea Schweighuber & Wolfgang Buchberger & Reinhold W. Lang, 2020. "Plastic Bottle Cap Recycling—Characterization of Recyclate Composition and Opportunities for Design for Circularity," Sustainability, MDPI, vol. 12(24), pages 1-21, December.
    3. Miguel Vigil & Maria Pedrosa-Laza & JV Alvarez Cabal & Francisco Ortega-Fernández, 2020. "Sustainability Analysis of Active Packaging for the Fresh Cut Vegetable Industry by Means of Attributional & Consequential Life Cycle Assessment," Sustainability, MDPI, vol. 12(17), pages 1-18, September.
    4. Benedetta Cotta, 0. "What goes around, comes around? Access and allocation problems in Global North–South waste trade," International Environmental Agreements: Politics, Law and Economics, Springer, vol. 0, pages 1-15.
    5. Rigamonti, L. & Grosso, M. & Møller, J. & Martinez Sanchez, V. & Magnani, S. & Christensen, T.H., 2014. "Environmental evaluation of plastic waste management scenarios," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 42-53.
    6. Riaz Ahmad & Gengyuan Liu & Remo Santagata & Marco Casazza & Jingyan Xue & Kifayatullah Khan & Javed Nawab & Sergio Ulgiati & Massimiliano Lega, 2019. "LCA of Hospital Solid Waste Treatment Alternatives in a Developing Country: The Case of District Swat, Pakistan," Sustainability, MDPI, vol. 11(13), pages 1-20, June.
    7. Helén Williams & Fredrik Wikström & Katarina Wetter-Edman & Per Kristensson, 2018. "Decisions on Recycling or Waste: How Packaging Functions Affect the Fate of Used Packaging in Selected Swedish Households," Sustainability, MDPI, vol. 10(12), pages 1-19, December.
    8. Benedetta Cotta, 2020. "What goes around, comes around? Access and allocation problems in Global North–South waste trade," International Environmental Agreements: Politics, Law and Economics, Springer, vol. 20(2), pages 255-269, June.
    9. Wang, Xiaotong & Lu, Meijun & Mao, Wei & Ouyang, Jinlong & Zhou, Bo & Yang, Yunkai, 2015. "Improving benefit-cost analysis to overcome financing difficulties in promoting energy-efficient renovation of existing residential buildings in China," Applied Energy, Elsevier, vol. 141(C), pages 119-130.
    10. Eleonora Fiore & Barbara Stabellini & Paolo Tamborrini, 2020. "A Systemic Design Approach Applied to Rice and Wine Value Chains. The Case of the InnovaEcoFood Project in Piedmont (Italy)," Sustainability, MDPI, vol. 12(21), pages 1-28, November.
    11. Valdonė Šuškevičė & Jolita Kruopienė, 2020. "Improvement of Packaging Circularity through the Application of Reusable Beverage Cup Reuse Models at Outdoor Festivals and Events," Sustainability, MDPI, vol. 13(1), pages 1-18, December.
    12. repec:aud:audfin:v:20:y:2018:i:48:p:278 is not listed on IDEAS
    13. Piumal HERATH & Sivarajah RAJUMESH, 2022. "Green Supply Chain Management and Organizational Performance: A Study of Sri Lankan Apparel Manufacturing Organizations," Management Research and Practice, Research Centre in Public Administration and Public Services, Bucharest, Romania, vol. 14(4), pages 19-36, December.
    14. Turner, David A. & Williams, Ian D. & Kemp, Simon, 2015. "Greenhouse gas emission factors for recycling of source-segregated waste materials," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 186-197.
    15. Constantin Torcătoru & Dan Săvescu & Angela Repanovici, 2022. "Literature Review by Scientometric Methods on the Impact of the Circular Economy on Sustainable Industrial Products," Sustainability, MDPI, vol. 14(9), pages 1-16, April.
    16. Rebekka Volk & Christoph Stallkamp & Justus J. Steins & Savina Padumane Yogish & Richard C. Müller & Dieter Stapf & Frank Schultmann, 2021. "Techno‐economic assessment and comparison of different plastic recycling pathways: A German case study," Journal of Industrial Ecology, Yale University, vol. 25(5), pages 1318-1337, October.
    17. Mayanti, Bening & Helo, Petri, 2022. "Closed-loop supply chain potential of agricultural plastic waste: Economic and environmental assessment of bale wrap waste recycling in Finland," International Journal of Production Economics, Elsevier, vol. 244(C).
    18. Huysman, Sofie & Debaveye, Sam & Schaubroeck, Thomas & Meester, Steven De & Ardente, Fulvio & Mathieux, Fabrice & Dewulf, Jo, 2015. "The recyclability benefit rate of closed-loop and open-loop systems: A case study on plastic recycling in Flanders," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 53-60.
    19. Magnus Andersson & Maria Ljunggren Söderman & Björn A. Sandén, 2019. "Adoption of Systemic and Socio-Technical Perspectives in Waste Management, WEEE and ELV Research," Sustainability, MDPI, vol. 11(6), pages 1-26, March.
    20. Suphichaya Suppipat & Kulthida Teachavorasinskun & Allen H. Hu, 2021. "Challenges of Applying Simplified LCA Tools in Sustainable Design Pedagogy," Sustainability, MDPI, vol. 13(4), pages 1-20, February.
    21. Beatrice Salieri & Natasha Stoudmann & Roland Hischier & Claudia Som & Bernd Nowack, 2021. "How Relevant Are Direct Emissions of Microplastics into Freshwater from an LCA Perspective?," Sustainability, MDPI, vol. 13(17), pages 1-16, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:10:p:5340-:d:551969. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.