IDEAS home Printed from https://ideas.repec.org/a/gam/jmathe/v10y2022i20p3733-d938953.html
   My bibliography  Save this article

A Combined Dynamic Programming and Simulation Approach to the Sizing of the Low-Level Order-Picking Area

Author

Listed:
  • Dragan Djurdjević

    (Faculty of Transport and Traffic Engineering, University of Belgrade, 11120 Beograd, Serbia)

  • Nenad Bjelić

    (Faculty of Transport and Traffic Engineering, University of Belgrade, 11120 Beograd, Serbia)

  • Dražen Popović

    (Faculty of Transport and Traffic Engineering, University of Belgrade, 11120 Beograd, Serbia)

  • Milan Andrejić

    (Faculty of Transport and Traffic Engineering, University of Belgrade, 11120 Beograd, Serbia)

Abstract

In order to increase the efficiency of the order-picking process, warehouses are forced to find ways to adopt to constantly intensifying changes in the assortment and quantities of stored products. Accordingly, we present a methodology that deals with such a problem at a tactical level by defining the optimal size and an allocation of products within the order-picking area of the most typical order-picking setting. The methodology combined two methods, dynamic programming and simulation modelling, with the aim of taking advantages of their positive features. In that sense, the optimal allocation of products for different sizes of the order-picking zone were obtained by the dynamic programming approach. Afterwards, the influence of a demand’s seasonality and variations were treated by the simulation model, so that the more realistic performances of the system were captured for the optimal allocation of products. The methodology was tested on the retailer data with significant week seasonality. The obtained results confirmed the practical applicability of the methodology in real systems, while the sensitivity analysis of results showed that special attention and effort should be given to the determination of costs related to the engagement of order-pikers, storage equipment and unit replenishment during a planning period.

Suggested Citation

  • Dragan Djurdjević & Nenad Bjelić & Dražen Popović & Milan Andrejić, 2022. "A Combined Dynamic Programming and Simulation Approach to the Sizing of the Low-Level Order-Picking Area," Mathematics, MDPI, vol. 10(20), pages 1-23, October.
  • Handle: RePEc:gam:jmathe:v:10:y:2022:i:20:p:3733-:d:938953
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2227-7390/10/20/3733/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2227-7390/10/20/3733/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Li Zhou & Huwei Liu & Junhui Zhao & Fan Wang & Jianglong Yang, 2022. "Performance Analysis of Picking Routing Strategies in the Leaf Layout Warehouse," Mathematics, MDPI, vol. 10(17), pages 1-28, September.
    2. Huwei Liu & Fan Wang & Junhui Zhao & Jianglong Yang & Chunqiao Tan & Li Zhou, 2022. "Performance Analysis of Picking Path Strategies in Chevron Layout Warehouse," Mathematics, MDPI, vol. 10(3), pages 1-18, January.
    3. Dudzinski, Krzysztof & Walukiewicz, Stanislaw, 1987. "Exact methods for the knapsack problem and its generalizations," European Journal of Operational Research, Elsevier, vol. 28(1), pages 3-21, January.
    4. Ivan Derpich & Juan M. Sepúlveda & Rodrigo Barraza & Fernanda Castro, 2022. "Warehouse Optimization: Energy Efficient Layout and Design," Mathematics, MDPI, vol. 10(10), pages 1-17, May.
    5. Gu, Jinxiang & Goetschalckx, Marc & McGinnis, Leon F., 2010. "Research on warehouse design and performance evaluation: A comprehensive review," European Journal of Operational Research, Elsevier, vol. 203(3), pages 539-549, June.
    6. Winkelhaus, Sven & Zhang, Minqi & Grosse, E. H. & Glock, C. H., 2022. "Hybrid order picking: A simulation model of a joint manual and autonomous order picking system," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 131493, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    7. Petersen, Charles G. & Aase, Gerald, 2004. "A comparison of picking, storage, and routing policies in manual order picking," International Journal of Production Economics, Elsevier, vol. 92(1), pages 11-19, November.
    8. Behnam Bahrami & El-Houssaine Aghezzaf & Veronique Limère, 2019. "Enhancing the order picking process through a new storage assignment strategy in forward-reserve area," International Journal of Production Research, Taylor & Francis Journals, vol. 57(21), pages 6593-6614, November.
    9. Wan Wu & René B.M. de Koster & Yugang Yu, 2020. "Forward-reserve storage strategies with order picking: When do they pay off?," IISE Transactions, Taylor & Francis Journals, vol. 52(9), pages 961-976, September.
    10. Thomas, Lisa M. & Meller, Russell D., 2015. "Developing design guidelines for a case-picking warehouse," International Journal of Production Economics, Elsevier, vol. 170(PC), pages 741-762.
    11. Guo, Xiaolong & Chen, Ran & Du, Shaofu & Yu, Yugang, 2021. "Storage assignment for newly arrived items in forward picking areas with limited open locations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 151(C).
    12. van den Berg, Jeroen P. & Sharp, Gunter P. & Gademann, A. J. R. M. (Noud) & Pochet, Yves, 1998. "Forward-reserve allocation in a warehouse with unit-load replenishments," European Journal of Operational Research, Elsevier, vol. 111(1), pages 98-113, November.
    13. Kees Jan Roodbergen & Iris F.A. Vis & G. Don Taylor, 2015. "Simultaneous determination of warehouse layout and control policies," International Journal of Production Research, Taylor & Francis Journals, vol. 53(11), pages 3306-3326, June.
    14. VAN DEN BER, Jeroen P. & SHARPG, Gunter P. & GADEMANN, A.J.R.M. (Noud) & POCHET, Yves, 1998. "Forward-reserve allocation in a warehouse with unit-load replenishments," LIDAM Reprints CORE 1404, Université catholique de Louvain, Center for Operations Research and Econometrics (CORE).
    15. Mirzaei, Masoud & Zaerpour, Nima & de Koster, René, 2021. "The impact of integrated cluster-based storage allocation on parts-to-picker warehouse performance," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 146(C).
    16. de Koster, Rene & Le-Duc, Tho & Roodbergen, Kees Jan, 2007. "Design and control of warehouse order picking: A literature review," European Journal of Operational Research, Elsevier, vol. 182(2), pages 481-501, October.
    17. Rouwenhorst, B. & Reuter, B. & Stockrahm, V. & van Houtum, G. J. & Mantel, R. J. & Zijm, W. H. M., 2000. "Warehouse design and control: Framework and literature review," European Journal of Operational Research, Elsevier, vol. 122(3), pages 515-533, May.
    18. J Gu & M Goetschalckx & L F McGinnis, 2010. "Solving the forward-reserve allocation problem in warehouse order picking systems," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 61(6), pages 1013-1021, June.
    19. Francesco Lolli & Francesco Lodi & Claudio Giberti & Antonio Maria Coruzzolo & Samuele Marinello & Muhammet Gul, 2022. "Order Picking Systems: A Queue Model for Dimensioning the Storage Capacity, the Crew of Pickers, and the AGV Fleet," Mathematical Problems in Engineering, Hindawi, vol. 2022, pages 1-15, February.
    20. Walter, Rico & Boysen, Nils & Scholl, Armin, 2013. "The discrete forward–reserve problem – Allocating space, selecting products, and area sizing in forward order picking," European Journal of Operational Research, Elsevier, vol. 229(3), pages 585-594.
    21. Jiang, Min & Leung, K.H. & Lyu, Zhongyuan & Huang, George Q., 2020. "Picking-replenishment synchronization for robotic forward-reserve warehouses," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 144(C).
    22. Baker, Peter & Canessa, Marco, 2009. "Warehouse design: A structured approach," European Journal of Operational Research, Elsevier, vol. 193(2), pages 425-436, March.
    23. van Gils, Teun & Ramaekers, Katrien & Caris, An & de Koster, René B.M., 2018. "Designing efficient order picking systems by combining planning problems: State-of-the-art classification and review," European Journal of Operational Research, Elsevier, vol. 267(1), pages 1-15.
    24. Safwan A. Altarazi & Maysa M. Ammouri, 2018. "Concurrent manual-order-picking warehouse design: a simulation-based design of experiments approach," International Journal of Production Research, Taylor & Francis Journals, vol. 56(23), pages 7103-7121, December.
    25. Steven T. Hackman & Loren K. Platzman, 1990. "Near-Optimal Solution of Generalized Resource Allocation Problems with Large Capacities," Operations Research, INFORMS, vol. 38(5), pages 902-910, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jiang, Min & Leung, K.H. & Lyu, Zhongyuan & Huang, George Q., 2020. "Picking-replenishment synchronization for robotic forward-reserve warehouses," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 144(C).
    2. Lam, H.Y. & Ho, G.T.S. & Mo, Daniel Y. & Tang, Valerie, 2023. "Responsive pick face replenishment strategy for stock allocation to fulfil e-commerce order," International Journal of Production Economics, Elsevier, vol. 264(C).
    3. Jiang, Min & Huang, George Q., 2022. "Intralogistics synchronization in robotic forward-reserve warehouses for e-commerce last-mile delivery," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 158(C).
    4. Çelik, Melih & Archetti, Claudia & Süral, Haldun, 2022. "Inventory routing in a warehouse: The storage replenishment routing problem," European Journal of Operational Research, Elsevier, vol. 301(3), pages 1117-1132.
    5. Leung, Eric K.H. & Lee, Carmen Kar Hang & Ouyang, Zhiyuan, 2022. "From traditional warehouses to Physical Internet hubs: A digital twin-based inbound synchronization framework for PI-order management," International Journal of Production Economics, Elsevier, vol. 244(C).
    6. AERTS, Babiche & CORNELISSENS, Trijntje & SÖRENSEN, Kenneth, 2022. "The internal warehouse replenishment problem: the importance of storage and replenishment policies," Working Papers 2022007, University of Antwerp, Faculty of Business and Economics.
    7. Derhami, Shahab & Smith, Jeffrey S. & Gue, Kevin R., 2020. "A simulation-based optimization approach to design optimal layouts for block stacking warehouses," International Journal of Production Economics, Elsevier, vol. 223(C).
    8. Guo, Xiaolong & Chen, Ran & Du, Shaofu & Yu, Yugang, 2021. "Storage assignment for newly arrived items in forward picking areas with limited open locations," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 151(C).
    9. van Gils, Teun & Caris, An & Ramaekers, Katrien & Braekers, Kris & de Koster, René B.M., 2019. "Designing efficient order picking systems: The effect of real-life features on the relationship among planning problems," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 125(C), pages 47-73.
    10. Silva, Allyson & Coelho, Leandro C. & Darvish, Maryam & Renaud, Jacques, 2020. "Integrating storage location and order picking problems in warehouse planning," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 140(C).
    11. Boysen, Nils & de Koster, René & Weidinger, Felix, 2019. "Warehousing in the e-commerce era: A survey," European Journal of Operational Research, Elsevier, vol. 277(2), pages 396-411.
    12. Giannikas, Vaggelis & Lu, Wenrong & Robertson, Brian & McFarlane, Duncan, 2017. "An interventionist strategy for warehouse order picking: Evidence from two case studies," International Journal of Production Economics, Elsevier, vol. 189(C), pages 63-76.
    13. Boysen, Nils & Emde, Simon & Hoeck, Michael & Kauderer, Markus, 2015. "Part logistics in the automotive industry: Decision problems, literature review and research agenda," European Journal of Operational Research, Elsevier, vol. 242(1), pages 107-120.
    14. Vidal Vieira, José Geraldo & Ramos Toso, Milton & da Silva, João Eduardo Azevedo Ramos & Cabral Ribeiro, Priscilla Cristina, 2017. "An AHP-based framework for logistics operations in distribution centres," International Journal of Production Economics, Elsevier, vol. 187(C), pages 246-259.
    15. N Anken & J-P Gagliardi & J Renaud & A Ruiz, 2011. "Space allocation and aisle positioning for an industrial pick-to-belt system," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 62(1), pages 38-49, January.
    16. Janka Saderova & Andrea Rosova & Marian Sofranko & Peter Kacmary, 2021. "Example of Warehouse System Design Based on the Principle of Logistics," Sustainability, MDPI, vol. 13(8), pages 1-16, April.
    17. van Gils, Teun & Ramaekers, Katrien & Braekers, Kris & Depaire, Benoît & Caris, An, 2018. "Increasing order picking efficiency by integrating storage, batching, zone picking, and routing policy decisions," International Journal of Production Economics, Elsevier, vol. 197(C), pages 243-261.
    18. Gagliardi, Jean-Philippe & Ruiz, Angel & Renaud, Jacques, 2008. "Space allocation and stock replenishment synchronization in a distribution center," International Journal of Production Economics, Elsevier, vol. 115(1), pages 19-27, September.
    19. Walter, Rico & Boysen, Nils & Scholl, Armin, 2013. "The discrete forward–reserve problem – Allocating space, selecting products, and area sizing in forward order picking," European Journal of Operational Research, Elsevier, vol. 229(3), pages 585-594.
    20. Boysen, Nils & Schwerdfeger, Stefan & Stephan, Konrad, 2023. "A review of synchronization problems in parts-to-picker warehouses," European Journal of Operational Research, Elsevier, vol. 307(3), pages 1374-1390.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jmathe:v:10:y:2022:i:20:p:3733-:d:938953. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.