IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v18y2025i7p1824-d1627992.html
   My bibliography  Save this article

Grindability Features of Torrefied Biomass

Author

Listed:
  • Mateusz Tymoszuk

    (Department of Power Engineering and Turbomachinery, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Konarskiego 18, 44-100 Gliwice, Poland)

  • Joanna Wnorowska

    (Department of Power Engineering and Turbomachinery, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Konarskiego 18, 44-100 Gliwice, Poland)

  • Sylwester Kalisz

    (Department of Power Engineering and Turbomachinery, Faculty of Energy and Environmental Engineering, Silesian University of Technology, Konarskiego 18, 44-100 Gliwice, Poland)

Abstract

Economic and legal conditions of the European power industry enforce higher participation of biomass in the thermal energy mix per power unit, due to the necessity of carbon dioxide emission reduction. One of the most important features dictating the suitability of biomass fuel for utilization in pulverized fuel-fired boilers is its grindability. The grindability of biomass is a difficult parameter to estimate due to its non-uniform morphology and inhomogeneous character. Milling and co-milling of large amounts of biomass can deteriorate the mill output and make it difficult to ensure the proper particle size distribution of the pulverized fuel fed into the combustion chamber. The main objective was to determine whether torrefaction pre-treatments could increase the grindability features of various types of biomass. Investigations of raw and torrefied biomass grindability were performed with the use of a modified Hardgrove Index for alder chips, palm kernel shells, and willow chips. Additionally, semi-industrial scale milling tests were performed, which allowed for the evaluation of torrefied biomass suitability for continuous grinding installations equipped with vertical spindle mills. According to the analysis, an increase in the biomass grindability index after the torrefaction process was shown. Additionally, it was noted that for milling low-density materials (e.g., torrefied biomass), changes in the construction of the industrial mill classifier may be necessary for the proper grinding circuit operation.

Suggested Citation

  • Mateusz Tymoszuk & Joanna Wnorowska & Sylwester Kalisz, 2025. "Grindability Features of Torrefied Biomass," Energies, MDPI, vol. 18(7), pages 1-16, April.
    • Handle: RePEc:gam:jeners:v:18:y:2025:i:7:p:1824-:d:1627992
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/18/7/1824/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/18/7/1824/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Szymon Szufa & Grzegorz Wielgosiński & Piotr Piersa & Justyna Czerwińska & Maria Dzikuć & Łukasz Adrian & Wiktoria Lewandowska & Marta Marczak, 2020. "Torrefaction of Straw from Oats and Maize for Use as a Fuel and Additive to Organic Fertilizers—TGA Analysis, Kinetics as Products for Agricultural Purposes," Energies, MDPI, vol. 13(8), pages 1-30, April.
    2. Głód, Krzysztof & Lasek, Janusz A. & Supernok, Krzysztof & Pawłowski, Przemysław & Fryza, Rafał & Zuwała, Jarosław, 2023. "Torrefaction as a way to increase the waste energy potential," Energy, Elsevier, vol. 285(C).
    3. Batidzirai, B. & Mignot, A.P.R. & Schakel, W.B. & Junginger, H.M. & Faaij, A.P.C., 2013. "Biomass torrefaction technology: Techno-economic status and future prospects," Energy, Elsevier, vol. 62(C), pages 196-214.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mateusz Jackowski & Łukasz Niedźwiecki & Krzysztof Mościcki & Amit Arora & Muhammad Azam Saeed & Krystian Krochmalny & Jakub Pawliczek & Anna Trusek & Magdalena Lech & Jan Skřínský & Jakub Čespiva & J, 2021. "Synergetic Co-Production of Beer Colouring Agent and Solid Fuel from Brewers’ Spent Grain in the Circular Economy Perspective," Sustainability, MDPI, vol. 13(18), pages 1-17, September.
    2. Yek, Peter Nai Yuh & Cheng, Yoke Wang & Liew, Rock Keey & Wan Mahari, Wan Adibah & Ong, Hwai Chyuan & Chen, Wei-Hsin & Peng, Wanxi & Park, Young-Kwon & Sonne, Christian & Kong, Sieng Huat & Tabatabaei, 2021. "Progress in the torrefaction technology for upgrading oil palm wastes to energy-dense biochar: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    3. Abdulyekeen, Kabir Abogunde & Daud, Wan Mohd Ashri Wan & Patah, Muhamad Fazly Abdul, 2024. "Torrefaction of wood and garden wastes from municipal solid waste to enhanced solid fuel using helical screw rotation-induced fluidised bed reactor: Effect of particle size, helical screw speed and te," Energy, Elsevier, vol. 293(C).
    4. Chen, Lichun & Wen, Chang & Wang, Wenyu & Liu, Tianyu & Liu, Enze & Liu, Haowen & Li, Zexin, 2020. "Combustion behaviour of biochars thermally pretreated via torrefaction, slow pyrolysis, or hydrothermal carbonisation and co-fired with pulverised coal," Renewable Energy, Elsevier, vol. 161(C), pages 867-877.
    5. Miedema, Jan H. & Benders, René M.J. & Moll, Henri C. & Pierie, Frank, 2017. "Renew, reduce or become more efficient? The climate contribution of biomass co-combustion in a coal-fired power plant," Applied Energy, Elsevier, vol. 187(C), pages 873-885.
    6. Leonel J. R. Nunes & João C. O. Matias, 2020. "Biomass Torrefaction as a Key Driver for the Sustainable Development and Decarbonization of Energy Production," Sustainability, MDPI, vol. 12(3), pages 1-9, January.
    7. Sánchez, M. & Clifford, B. & Nixon, J.D., 2018. "Modelling and evaluating a solar pyrolysis system," Renewable Energy, Elsevier, vol. 116(PA), pages 630-638.
    8. Kambo, Harpreet Singh & Dutta, Animesh, 2015. "A comparative review of biochar and hydrochar in terms of production, physico-chemical properties and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 359-378.
    9. Ansari, Khursheed B. & Gaikar, Vilas G., 2019. "Investigating production of hydrocarbon rich bio-oil from grassy biomass using vacuum pyrolysis coupled with online deoxygenation of volatile products over metallic iron," Renewable Energy, Elsevier, vol. 130(C), pages 305-318.
    10. Eunhye Song & Ho Kim & Kyung Woo Kim & Young-Man Yoon, 2023. "Characteristic Evaluation of Different Carbonization Processes for Hydrochar, Torrefied Char, and Biochar Produced from Cattle Manure," Energies, MDPI, vol. 16(7), pages 1-14, April.
    11. Jorge Miguel Carneiro Ribeiro & Radu Godina & João Carlos de Oliveira Matias & Leonel Jorge Ribeiro Nunes, 2018. "Future Perspectives of Biomass Torrefaction: Review of the Current State-Of-The-Art and Research Development," Sustainability, MDPI, vol. 10(7), pages 1-17, July.
    12. Akbari, Maryam & Oyedun, Adetoyese Olajire & Kumar, Amit, 2020. "Techno-economic assessment of wet and dry torrefaction of biomass feedstock," Energy, Elsevier, vol. 207(C).
    13. Deutsch, Richard & Kienzl, Norbert & Krammer, Gernot & Stocker, Hugo & Strasser, Christoph, 2024. "Carbonized wood as a blast furnace pulverized coal substitute: A Techno-economic assessment," Energy, Elsevier, vol. 313(C).
    14. Gai, Chao & Dong, Yuping & Zhang, Tonghui, 2014. "Downdraft gasification of corn straw as a non-woody biomass: Effects of operating conditions on chlorides distribution," Energy, Elsevier, vol. 71(C), pages 638-644.
    15. Aslani, Alireza & Mazzuca-Sobczuk, Tania & Eivazi, Sepideh & Bekhrad, Kaveh, 2018. "Analysis of bioenergy technologies development based on life cycle and adaptation trends," Renewable Energy, Elsevier, vol. 127(C), pages 1076-1086.
    16. Katarzyna Ławińska & Szymon Szufa & Andrzej Obraniak & Tomasz Olejnik & Robert Siuda & Jerzy Kwiatek & Dominika Ogrodowczyk, 2020. "Disc Granulation Process of Carbonation Lime Mud as a Method of Post-Production Waste Management," Energies, MDPI, vol. 13(13), pages 1-14, July.
    17. Mohd Idris, Muhammad Nurariffudin & Hashim, Haslenda & Leduc, Sylvain & Yowargana, Ping & Kraxner, Florian & Woon, Kok Sin, 2021. "Deploying bioenergy for decarbonizing Malaysian energy sectors and alleviating renewable energy poverty," Energy, Elsevier, vol. 232(C).
    18. García, R. & González-Vázquez, M.P. & Martín, A.J. & Pevida, C. & Rubiera, F., 2020. "Pelletization of torrefied biomass with solid and liquid bio-additives," Renewable Energy, Elsevier, vol. 151(C), pages 175-183.
    19. Niu, Yanqing & Lv, Yuan & Lei, Yu & Liu, Siqi & Liang, Yang & Wang, Denghui & Hui, Shi'en, 2019. "Biomass torrefaction: properties, applications, challenges, and economy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 115(C).
    20. Manuel Uche-Soria & Carlos Rodríguez-Monroy, 2019. "An Efficient Waste-To-Energy Model in Isolated Environments. Case Study: La Gomera (Canary Islands)," Sustainability, MDPI, vol. 11(11), pages 1-21, June.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:18:y:2025:i:7:p:1824-:d:1627992. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.