IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i24p8110-d1301805.html
   My bibliography  Save this article

Experimental Investigation of the In-Cylinder Flow of a Compression Ignition Optical Engine for Different Tangential Port Opening Areas

Author

Listed:
  • Mitsuhisa Ichiyanagi

    (Department of Engineering and Applied Sciences, Sophia University, Tokyo 102-8554, Japan)

  • Emir Yilmaz

    (Department of Engineering and Applied Sciences, Sophia University, Tokyo 102-8554, Japan)

  • Kohei Hamada

    (Graduate School of Science and Technology, Sophia University, Tokyo 102-8554, Japan)

  • Taiga Hara

    (Graduate School of Science and Technology, Sophia University, Tokyo 102-8554, Japan)

  • Willyanto Anggono

    (Mechanical Engineering Department, Petra Christian University, Surabaya 60236, Indonesia)

  • Takashi Suzuki

    (Department of Engineering and Applied Sciences, Sophia University, Tokyo 102-8554, Japan)

Abstract

The push for decarbonization of internal combustion engines (ICEs) has spurred interest in alternative fuels, such as hydrogen and ammonia. To optimize combustion efficiency and reduce emissions, a closer look at the intake system and in-cylinder flows is crucial, especially when a hard-to-burn fuel, such as ammonia is utilized. In port fuel injection ICEs, airflow within cylinders profoundly affects combustion and emissions by influencing the air–fuel mixing phenomenon. Adjusting intake port openings is an important factor in controlling the in-cylinder airflow. In previous experiments with a transparent cylinder, tangential and helical ports demonstrated that varying the helical port’s opening significantly impacts flow velocities, swirl ratios, and swirl center positions (SCPs). In this study, we used a particle image velocimetry technique to investigate how the tangential port’s opening affects intake and in-cylinder flows. Flow velocities were assessed at different planes near the cylinder head, evaluating streamline maps, turbulent kinetic energy (TKE), and SCPs. Under the given experimental conditions, swirl flows were successfully generated early in the compression stroke when the tangential port opening exceeded 25%. Our findings emphasize the importance of minimizing TKE and SCP variation for successful swirl flow generation in engine cylinders equipped with both tangential and helical ports.

Suggested Citation

  • Mitsuhisa Ichiyanagi & Emir Yilmaz & Kohei Hamada & Taiga Hara & Willyanto Anggono & Takashi Suzuki, 2023. "Experimental Investigation of the In-Cylinder Flow of a Compression Ignition Optical Engine for Different Tangential Port Opening Areas," Energies, MDPI, vol. 16(24), pages 1-16, December.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:24:p:8110-:d:1301805
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/24/8110/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/24/8110/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Prasad, B.V.V.S.U. & Sharma, C.S. & Anand, T.N.C. & Ravikrishna, R.V., 2011. "High swirl-inducing piston bowls in small diesel engines for emission reduction," Applied Energy, Elsevier, vol. 88(7), pages 2355-2367, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Soudagar, Manzoore Elahi M. & Mujtaba, M.A. & Safaei, Mohammad Reza & Afzal, Asif & V, Dhana Raju & Ahmed, Waqar & Banapurmath, N.R. & Hossain, Nazia & Bashir, Shahid & Badruddin, Irfan Anjum & Goodar, 2021. "Effect of Sr@ZnO nanoparticles and Ricinus communis biodiesel-diesel fuel blends on modified CRDI diesel engine characteristics," Energy, Elsevier, vol. 215(PA).
    2. Korakianitis, T. & Imran, S. & Chung, N. & Ali, Hassan & Emberson, D.R. & Crookes, R.J., 2015. "Combustion-response mapping procedure for internal-combustion engine emissions," Applied Energy, Elsevier, vol. 156(C), pages 149-158.
    3. Bari, S. & Saad, Idris, 2014. "Effect of guide vane height on the performance and emissions of a compression ignition (CI) engine run with biodiesel through simulation and experiment," Applied Energy, Elsevier, vol. 136(C), pages 431-444.
    4. Pang, Kar Mun & Ng, Hoon Kiat & Gan, Suyin, 2012. "In-cylinder diesel spray combustion simulations using parallel computation: A performance benchmarking study," Applied Energy, Elsevier, vol. 93(C), pages 466-478.
    5. Channappagoudra, Manjunath & Ramesh, K. & Manavendra, G., 2020. "Effect of injection timing on modified direct injection diesel engine performance operated with dairy scum biodiesel and Bio-CNG," Renewable Energy, Elsevier, vol. 147(P1), pages 1019-1032.
    6. Varun, & Singh, Paramvir & Tiwari, Samaresh Kumar & Singh, Rituparn & Kumar, Naresh, 2017. "Modification in combustion chamber geometry of CI engines for suitability of biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1016-1033.
    7. Mantas Felneris & Laurencas Raslavičius & Saugirdas Pukalskas & Alfredas Rimkus, 2021. "Assessment of Microalgae Oil as a Carbon-Neutral Transport Fuel: Engine Performance, Energy Balance Changes, and Exhaust Gas Emissions," Sustainability, MDPI, vol. 13(14), pages 1-21, July.
    8. Khandal, S.V. & Banapurmath, N.R. & Gaitonde, V.N. & Hiremath, S.S., 2017. "Paradigm shift from mechanical direct injection diesel engines to advanced injection strategies of diesel homogeneous charge compression ignition (HCCI) engines- A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 369-384.
    9. Khan, Shahanwaz & Panua, Rajsekhar & Bose, Probir Kumar, 2019. "The impact of combustion chamber configuration on combustion and emissions of a single cylinder diesel engine fuelled with soybean methyl ester blends with diesel," Renewable Energy, Elsevier, vol. 143(C), pages 335-351.
    10. Marco D’Amato & Annarita Viggiano & Vinicio Magi, 2020. "On the Turbulence-Chemistry Interaction of an HCCI Combustion Engine," Energies, MDPI, vol. 13(22), pages 1-23, November.
    11. Channappagoudra, Manjunath, 2020. "Comparative study of baseline and modified engine performance operated with dairy scum biodiesel and Bio-CNG," Renewable Energy, Elsevier, vol. 151(C), pages 604-618.
    12. Bari, S. & Saad, Idris, 2015. "Optimization of vane numbers through simulation and experiment, and investigation of the effect on the performance and emissions of a CI (compression ignition) engine run with biodiesel," Energy, Elsevier, vol. 79(C), pages 248-263.
    13. Gnana Sagaya Raj, Antony Raj & Mallikarjuna, Jawali Maharudrappa & Ganesan, Venkitachalam, 2013. "Energy efficient piston configuration for effective air motion – A CFD study," Applied Energy, Elsevier, vol. 102(C), pages 347-354.
    14. Doppalapudi, A.T. & Azad, A.K. & Khan, M.M.K., 2021. "Combustion chamber modifications to improve diesel engine performance and reduce emissions: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    15. Channappagoudra, Manjunath & Ramesh, K. & Manavendra, G., 2019. "Comparative study of standard engine and modified engine with different piston bowl geometries operated with B20 fuel blend," Renewable Energy, Elsevier, vol. 133(C), pages 216-232.
    16. McCaffery, Cavan & Yang, Jiacheng & Karavalakis, Georgios & Yoon, Seungju & Johnson, Kent C. & Miller, J. Wayne & Durbin, Thomas D., 2022. "Evaluation of small off-road diesel engine emissions and aftertreatment systems," Energy, Elsevier, vol. 251(C).
    17. Jena, Ashutosh & Singh, Akhilendra Pratap & Agarwal, Avinash Kumar, 2022. "Optical and computational investigations of the effect of Spray-Swirl interactions on autoignition and soot formation in a compression ignition engine fuelled by Diesel, dieseline and diesohol," Applied Energy, Elsevier, vol. 324(C).
    18. Zhao, Xiaohuan & Liu, Fang & Wang, Chunhua, 2022. "Effects of different piston combustion chamber heights on heat transfer and energy conversion performance enhancement of a heavy-duty truck diesel engine," Energy, Elsevier, vol. 249(C).
    19. Payri, Francisco & Olmeda, Pablo & Arnau, Francisco J. & Dombrovsky, Artem & Smith, Les, 2014. "External heat losses in small turbochargers: Model and experiments," Energy, Elsevier, vol. 71(C), pages 534-546.
    20. Venu, Harish & Raju, V. Dhana & Subramani, Lingesan, 2019. "Combined effect of influence of nano additives, combustion chamber geometry and injection timing in a DI diesel engine fuelled with ternary (diesel-biodiesel-ethanol) blends," Energy, Elsevier, vol. 174(C), pages 386-406.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:24:p:8110-:d:1301805. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.