IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i24p7967-d1296669.html
   My bibliography  Save this article

Numerical Investigation of the Thermal Performance of a Hybrid Phase Change Material and Forced Air Cooling System for a Three-Cell Lithium-Ion Battery Module

Author

Listed:
  • Van-Tinh Huynh

    (School of Mechanical Engineering, University of Ulsan, Ulsan 44610, Republic of Korea)

  • Kyoungsik Chang

    (School of Mechanical Engineering, University of Ulsan, Ulsan 44610, Republic of Korea)

  • Sang-Wook Lee

    (School of Mechanical Engineering, University of Ulsan, Ulsan 44610, Republic of Korea)

Abstract

The thermal performance of a lithium-ion battery module comprising three cells contained within a casing was investigated at discharge rates of 3C and 5C with three different cooling strategies: forced air, phase-change material (PCM), and a hybrid system using a combination of forced air and the PCM. Three levels of fan speed (5000 rpm; 7000 rpm; and 9000 rpm) for cooling air flow were considered. A numerical simulation of heat transfer was performed using the ANSYS Fluent software. The electrochemical modelling of a battery was developed based on the NTGK approach, and the phase-change phenomenon was treated as an enthesis–porosity problem. The composite PCM, aluminum metal foam embedded in n-octadecane, had better heat dissipation performance than forced air convection. The PCM is significantly more effective at heat dissipation than forced air. Interestingly, when using a hybrid cooling system that combines forced air and a PCM, although it meets the operational requirements for Li-ion batteries in regard to maximum temperature and temperature uniformity at a 3C discharge rate, the airflow appears to have a negligible effect on thermal management and yields an indiscernible change in temperature. This can be attributed to a complex flow pattern that developed in a casing as a result of the suboptimal design of the inlet and outlet. Further studies will be required for the optimal positioning of the inlet and outlet, as well as the effectiveness of combining liquid cooling methods.

Suggested Citation

  • Van-Tinh Huynh & Kyoungsik Chang & Sang-Wook Lee, 2023. "Numerical Investigation of the Thermal Performance of a Hybrid Phase Change Material and Forced Air Cooling System for a Three-Cell Lithium-Ion Battery Module," Energies, MDPI, vol. 16(24), pages 1-19, December.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:24:p:7967-:d:1296669
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/24/7967/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/24/7967/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Akula, Rajesh & Balaji, C., 2022. "Thermal management of 18650 Li-ion battery using novel fins–PCM–EG composite heat sinks," Applied Energy, Elsevier, vol. 316(C).
    2. Van-Tinh Huynh & Kyoungsik Chang & Sang-Wook Lee, 2021. "One-Dimensional and Three-Dimensional Numerical Investigations of Thermal Performance of Phase Change Materials in a Lithium-Ion Battery," Energies, MDPI, vol. 14(24), pages 1-18, December.
    3. Jiang, Z.Y. & Qu, Z.G., 2019. "Lithium–ion battery thermal management using heat pipe and phase change material during discharge–charge cycle: A comprehensive numerical study," Applied Energy, Elsevier, vol. 242(C), pages 378-392.
    4. E, Shengxin & Liu, Yuxian & Cui, Yaxin & Wu, Aojin & Yin, Huichun, 2023. "Effects of composite cooling strategy including phase change material and cooling air on the heat dissipation performance improvement of lithium ion power batteries pack in hot climate and its catastr," Energy, Elsevier, vol. 283(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mohammed, Abubakar Gambo & Elfeky, Karem Elsayed & Wang, Qiuwang, 2022. "Recent advancement and enhanced battery performance using phase change materials based hybrid battery thermal management for electric vehicles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    2. Sun, Li & Sun, Wen & You, Fengqi, 2020. "Core temperature modelling and monitoring of lithium-ion battery in the presence of sensor bias," Applied Energy, Elsevier, vol. 271(C).
    3. Liu, Jiahao & Fan, Yining & Wang, Jinhui & Tao, Changfa & Chen, Mingyi, 2022. "A model-scale experimental and theoretical study on a mineral oil-immersed battery cooling system," Renewable Energy, Elsevier, vol. 201(P1), pages 712-723.
    4. Liu, Huaqiang & Ahmad, Shakeel & Shi, Yu & Zhao, Jiyun, 2021. "A parametric study of a hybrid battery thermal management system that couples PCM/copper foam composite with helical liquid channel cooling," Energy, Elsevier, vol. 231(C).
    5. Murali, G. & Sravya, G.S.N. & Jaya, J. & Naga Vamsi, V., 2021. "A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    6. Ma, Ying & Yang, Heng & Zuo, Hongyan & Ma, Yi & Zuo, Qingsong & Chen, Ying & He, Xiaoxiang & Wei, Rongrong, 2023. "Three-dimensional EG@MOF matrix composite phase change materials for high efficiency battery cooling," Energy, Elsevier, vol. 278(C).
    7. Zhao, Weiwei & Zhang, Tongtong & Kildahl, Harriet & Ding, Yulong, 2022. "Mobile energy recovery and storage: Multiple energy-powered EVs and refuelling stations," Energy, Elsevier, vol. 257(C).
    8. Liang, Lin & Zhao, Yaohua & Diao, Yanhua & Ren, Ruyang & Zhu, Tingting & Li, Yan, 2023. "Experimental investigation of preheating performance of lithium-ion battery modules in electric vehicles enhanced by bending flat micro heat pipe array," Applied Energy, Elsevier, vol. 337(C).
    9. Ewelina Radomska & Lukasz Mika & Karol Sztekler & Lukasz Lis, 2020. "The Impact of Heat Exchangers’ Constructions on the Melting and Solidification Time of Phase Change Materials," Energies, MDPI, vol. 13(18), pages 1-44, September.
    10. Kassianne Tofani & Saeed Tiari, 2021. "Nano-Enhanced Phase Change Materials in Latent Heat Thermal Energy Storage Systems: A Review," Energies, MDPI, vol. 14(13), pages 1-34, June.
    11. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ma, Binjian, 2023. "A compact and lightweight hybrid liquid cooling system coupling with Z-type cold plates and PCM composite for battery thermal management," Energy, Elsevier, vol. 263(PE).
    12. Mousavi, Sepehr & Zadehkabir, Amirhosein & Siavashi, Majid & Yang, Xiaohu, 2023. "An improved hybrid thermal management system for prismatic Li-ion batteries integrated with mini-channel and phase change materials," Applied Energy, Elsevier, vol. 334(C).
    13. Shen, Zu-Guo & Chen, Shuai & Liu, Xun & Chen, Ben, 2021. "A review on thermal management performance enhancement of phase change materials for vehicle lithium-ion batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    14. Huang, Qiqiu & Li, Xinxi & Zhang, Guoqing & Kan, Yongchun & Li, Canbing & Deng, Jian & Wang, Changhong, 2022. "Flexible composite phase change material with anti-leakage and anti-vibration properties for battery thermal management," Applied Energy, Elsevier, vol. 309(C).
    15. Ling, Yun-Zhi & Zhang, Xiao-Song & Wang, Feng & She, Xiao-Hui, 2020. "Performance study of phase change materials coupled with three-dimensional oscillating heat pipes with different structures for electronic cooling," Renewable Energy, Elsevier, vol. 154(C), pages 636-649.
    16. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    17. Anisha & Anil Kumar, 2023. "Identification and Mitigation of Shortcomings in Direct and Indirect Liquid Cooling-Based Battery Thermal Management System," Energies, MDPI, vol. 16(9), pages 1-21, April.
    18. Yi, Feng & E, Jiaqiang & Zhang, Bin & Zuo, Hongyan & Wei, Kexiang & Chen, Jingwei & Zhu, Hong & Zhu, Hao & Deng, Yuanwang, 2022. "Effects analysis on heat dissipation characteristics of lithium-ion battery thermal management system under the synergism of phase change material and liquid cooling method," Renewable Energy, Elsevier, vol. 181(C), pages 472-489.
    19. Faizan, Md & Pati, Sukumar & Randive, Pitambar, 2023. "Effect of channel configurations on the thermal management of fast discharging Li-ion battery module with hybrid cooling," Energy, Elsevier, vol. 267(C).
    20. Thomas Imre Cyrille Buidin & Florin Mariasiu, 2021. "Battery Thermal Management Systems: Current Status and Design Approach of Cooling Technologies," Energies, MDPI, vol. 14(16), pages 1-32, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:24:p:7967-:d:1296669. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.