IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i7p2487-d781528.html
   My bibliography  Save this article

Comprehensive Estimation of Combustion Behavior and Thermochemical Structure Evolution of Four Typical Industrial Polymeric Wastes

Author

Listed:
  • Shiqiao Yang

    (Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China
    Everbright Environmental Protection Technology Equipment (Changzhou) Co., Ltd., Changzhou 213011, China)

  • Ming Lei

    (Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China)

  • Min Li

    (Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China)

  • Chao Liu

    (Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China)

  • Beichen Xue

    (Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China)

  • Rui Xiao

    (Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, China)

Abstract

A huge amount of industrial waste will be generated during the industrialization process and their harmless disposal has always been a headache for reducing carbon emissions. In this study, the combustion behaviors and thermal kinetics of four typical industrial polymeric wastes including rubber, leather, plastic and cloth, were systematically studied by using a Thermogravimetric Analysis. The gas emission and structural evolution was comprehensively analyzed using TG-FTIR, 2D-PCIS, ICP and TEM. The results show that the combustibility of leather and cloth are better than the other two samples, while the rubber and plastic have a wider combustion temperature range for higher content of C-H bonds and, the intermediate oxidation process and the stubborn cracking process of C=C bonds. The surface reaction was considered to be the main reaction of rubber and plastic (pre-exponential factor less than 10 −9 ), while both leather and cloth went through a complex procedure during multiple decomposition. The volatiles products are gases (e.g., CO 2 , CH 4 ) and small molecules (e.g., H 2 O). The high levels of basic metals in the industrial waste causes serious slagging and fouling tendency (fouling index higher than 4.0), which have a serious adverse influence on the operation of a waste incineration plant.

Suggested Citation

  • Shiqiao Yang & Ming Lei & Min Li & Chao Liu & Beichen Xue & Rui Xiao, 2022. "Comprehensive Estimation of Combustion Behavior and Thermochemical Structure Evolution of Four Typical Industrial Polymeric Wastes," Energies, MDPI, vol. 15(7), pages 1-22, March.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:7:p:2487-:d:781528
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/7/2487/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/7/2487/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Muthuraman, Marisamy & Namioka, Tomoaki & Yoshikawa, Kunio, 2010. "Characteristics of co-combustion and kinetic study on hydrothermally treated municipal solid waste with different rank coals: A thermogravimetric analysis," Applied Energy, Elsevier, vol. 87(1), pages 141-148, January.
    2. Zhang, Jun & Li, Chengyu & Yuan, Haoran & Chen, Yong, 2022. "Enhancement of aromatics production via cellulose fast pyrolysis over Ru modified hierarchical zeolites," Renewable Energy, Elsevier, vol. 184(C), pages 280-290.
    3. Tomasz Stachowiak & Katarzyna Łukasik, 2021. "The Management of Polymer and Biodegradable Composite Waste in Relation to Petroleum-Based Thermoplastic Polymer Waste—In Terms of Energy Consumption and Processability," Sustainability, MDPI, vol. 13(7), pages 1-16, March.
    4. Mian, Inamullah & Li, Xian & Dacres, Omar D. & Wang, Jianjiang & Wei, Bo & Jian, Yiming & Zhong, Mei & Liu, Jingmei & Ma, Fengyun & Rahman, Noor, 2020. "Combustion kinetics and mechanism of biomass pellet," Energy, Elsevier, vol. 205(C).
    5. Zhang, Jun & Gu, Jing & Yuan, Haoran & Chen, Yong, 2020. "Thermal behaviors and kinetics for fast pyrolysis of chemical pretreated waste cassava residues," Energy, Elsevier, vol. 208(C).
    6. Joanna Wnorowska & Szymon Ciukaj & Sylwester Kalisz, 2021. "Thermogravimetric Analysis of Solid Biofuels with Additive under Air Atmosphere," Energies, MDPI, vol. 14(8), pages 1-19, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Grzegorz Czerski, 2022. "Pyrolysis and Gasification of Biomass and Waste," Energies, MDPI, vol. 15(19), pages 1-5, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sergio Paniagua & Alba Prado-Guerra & Ana Isabel Neto & Teresa Nunes & Luís Tarelho & Célia Alves & Luis Fernando Calvo, 2020. "Influence of Varieties and Organic Fertilizer in the Elaboration of a New Poplar-Straw Pellet and Its Emissions in a Domestic Boiler," Energies, MDPI, vol. 13(23), pages 1-17, November.
    2. Yanfen, Liao & Xiaoqian, Ma, 2010. "Thermogravimetric analysis of the co-combustion of coal and paper mill sludge," Applied Energy, Elsevier, vol. 87(11), pages 3526-3532, November.
    3. Zhao, Peitao & Chen, Hongfang & Ge, Shifu & Yoshikawa, Kunio, 2013. "Effect of the hydrothermal pretreatment for the reduction of NO emission from sewage sludge combustion," Applied Energy, Elsevier, vol. 111(C), pages 199-205.
    4. Liu, Huiyu & Zhang, Jun & Shan, Rui & Yuan, Haoran & Chen, Yong, 2024. "Mechanistic insights into Ga-modified hollow ZSM-5 catalyzed fast pyrolysis of cassava residue," Energy, Elsevier, vol. 295(C).
    5. Krzysztof Dziedzic & Bogusława Łapczyńska-Kordon & Michał Jurczyk & Marek Wróbel & Marcin Jewiarz & Krzysztof Mudryk & Tadeusz Pająk, 2022. "Solid Digestate—Mathematical Modeling of Combustion Process," Energies, MDPI, vol. 15(12), pages 1-22, June.
    6. Ion V. Ion & Florin Popescu & Razvan Mahu & Eugen Rusu, 2021. "A Numerical Model of Biomass Combustion Physical and Chemical Processes," Energies, MDPI, vol. 14(7), pages 1-19, April.
    7. Vershinina, Ksenia Yu & Dorokhov, Vadim V. & Romanov, Daniil S. & Strizhak, Pavel A., 2022. "Combustion stages of waste-derived blends burned as pellets, layers, and droplets of slurry," Energy, Elsevier, vol. 251(C).
    8. Xia, Sunwen & Yang, Haiping & Lu, Wang & Cai, Ning & Xiao, Haoyu & Chen, Xu & Chen, Yingquan & Wang, Xianhua & Wang, Shurong & Wu, Peng & Chen, Hanping, 2022. "Fe–Co based synergistic catalytic graphitization of biomass: Influence of the catalyst type and the pyrolytic temperature," Energy, Elsevier, vol. 239(PC).
    9. Atimtay, Aysel & Yurdakul, Sema, 2020. "Combustion and Co-Combustion characteristics of torrefied poultry litter with lignite," Renewable Energy, Elsevier, vol. 148(C), pages 1292-1301.
    10. Dai, C. & Cai, X.H. & Cai, Y.P. & Huang, G.H., 2014. "A simulation-based fuzzy possibilistic programming model for coal blending management with consideration of human health risk under uncertainty," Applied Energy, Elsevier, vol. 133(C), pages 1-13.
    11. Santos, Carolina Monteiro & de Oliveira, Leandro Soares & Alves Rocha, Elém Patrícia & Franca, Adriana Silva, 2020. "Thermal conversion of defective coffee beans for energy purposes: Characterization and kinetic modeling," Renewable Energy, Elsevier, vol. 147(P1), pages 1275-1291.
    12. Jin, Yuqi & Lu, Liang & Ma, Xiaojun & Liu, Hongmei & Chi, Yong & Yoshikawa, Kunio, 2013. "Effects of blending hydrothermally treated municipal solid waste with coal on co-combustion characteristics in a lab-scale fluidized bed reactor," Applied Energy, Elsevier, vol. 102(C), pages 563-570.
    13. Vinay Atgur & G. Manavendra & Nagaraj R. Banapurmath & Boggarapu Nageswar Rao & Ali A. Rajhi & T. M. Yunus Khan & Chandramouli Vadlamudi & Sanjay Krishnappa & Ashok M. Sajjan & R. Venkatesh, 2022. "Essence of Thermal Analysis to Assess Biodiesel Combustion Performance," Energies, MDPI, vol. 15(18), pages 1-23, September.
    14. Qiao, Yanyu & Chen, Zhichao & Wu, Xiaolan & Li, Zhengqi, 2023. "Effect of demineralization on waste tire pyrolysis char physical, chemical characteristics and combustion characteristics," Energy, Elsevier, vol. 284(C).
    15. Comesaña, R. & Gómez, M.A. & Álvarez Feijoo, M.A. & Eguía, P., 2013. "CFD simulation of a TG–DSC furnace during the indium phase change process," Applied Energy, Elsevier, vol. 102(C), pages 293-298.
    16. Mohd Safaai, Nor Sharliza & Pang, Shusheng, 2021. "Pyrolysis kinetics of chemically treated and torrefied radiata pine identified through thermogravimetric analysis," Renewable Energy, Elsevier, vol. 175(C), pages 200-213.
    17. Dudziak, M. & Werle, S. & Marszałek, A. & Sobek, S. & Magdziarz, A., 2022. "Comparative assessment of the biomass solar pyrolysis biochars combustion behavior and zinc Zn(II) adsorption," Energy, Elsevier, vol. 261(PB).
    18. Wang, Chang’an & Zhang, Xiaoming & Liu, Yinhe & Che, Defu, 2012. "Pyrolysis and combustion characteristics of coals in oxyfuel combustion," Applied Energy, Elsevier, vol. 97(C), pages 264-273.
    19. Siddiqi, Muhammad Hamid & Liu, Xiao-min & Hussain, Muhammad Asif & Qureshi, Tayyab & Tabish, Asif Nadeem & Lateef, Hafiz Umair & Zeb, Hassan & Farooq, Muhammad & Nawaz, Saba & Nawaz, Saher, 2022. "Evaluation of physiochemical, thermal and kinetic properties of wheat straw by demineralising with leaching reagents for energy applications," Energy, Elsevier, vol. 238(PC).
    20. Gu, Tianbao & Ma, Wenchao & Berning, Torsten & Guo, Zhenning & Andersson, Ronnie & Yin, Chungen, 2022. "Advanced simulation of a 750 t/d municipal solid waste grate boiler to better accommodate feedstock changes due to waste classification," Energy, Elsevier, vol. 254(PB).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:7:p:2487-:d:781528. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.