IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i7p2478-d781249.html
   My bibliography  Save this article

Blade Dimension Optimization and Performance Analysis of the 2-D Ugrinsky Wind Turbine

Author

Listed:
  • Luke Sakamoto

    (Department of Mechanical Engineering, Kyoto Institute of Technology, Kyoto 606-8585, Japan)

  • Tomohiro Fukui

    (Department of Mechanical Engineering, Kyoto Institute of Technology, Kyoto 606-8585, Japan)

  • Koji Morinishi

    (Department of Mechanical Engineering, Kyoto Institute of Technology, Kyoto 606-8585, Japan)

Abstract

With the increasing focus on renewable energy, there is a need to improve the efficiency of vertical-axis wind turbines (VAWTs). The Ugrinsky wind turbine is a type of VAWT, but there are few studies on this turbine. Previous studies have shown that the maximum power coefficient of the Ugrinsky wind turbine reaches 0.170, which is 54.5% higher than that of the Savonius type (0.110), and this turbine maintains a high power coefficient over a wide range of tip speed ratios (TSR). In this study, the dimensions of the two semicircles of the Ugrinsky wind turbine were further optimized to obtain a higher power coefficient. An analysis of the effect of the blade dimensions on the performance was conducted. The flow around the turbine was simulated using the regularized lattice Boltzmann method. The geometry of the turbine was simulated using the virtual flux method for the Cartesian grid. The optimization was conducted in terms of the output power coefficient and the average value of the power coefficient for neighboring TSR to consider the fluctuation of the TSR. This study demonstrates that a closer vortex distance favored the growth of the vortex and improved the power coefficient.

Suggested Citation

  • Luke Sakamoto & Tomohiro Fukui & Koji Morinishi, 2022. "Blade Dimension Optimization and Performance Analysis of the 2-D Ugrinsky Wind Turbine," Energies, MDPI, vol. 15(7), pages 1-14, March.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:7:p:2478-:d:781249
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/7/2478/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/7/2478/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Mohamed, M.H. & Janiga, G. & Pap, E. & Thévenin, D., 2010. "Optimization of Savonius turbines using an obstacle shielding the returning blade," Renewable Energy, Elsevier, vol. 35(11), pages 2618-2626.
    2. Andrea Alaimo & Antonio Esposito & Alberto Milazzo & Calogero Orlando & Flavio Trentacosti, 2013. "Slotted Blades Savonius Wind Turbine Analysis by CFD," Energies, MDPI, vol. 6(12), pages 1-17, December.
    3. Roy, Sukanta & Saha, Ujjwal K., 2013. "Review on the numerical investigations into the design and development of Savonius wind rotors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 73-83.
    4. Wenlong Tian & Baowei Song & James H. VanZwieten & Parakram Pyakurel, 2015. "Computational Fluid Dynamics Prediction of a Modified Savonius Wind Turbine with Novel Blade Shapes," Energies, MDPI, vol. 8(8), pages 1-15, July.
    5. Baoshou Zhang & Baowei Song & Zhaoyong Mao & Wenlong Tian & Boyang Li & Bo Li, 2017. "A Novel Parametric Modeling Method and Optimal Design for Savonius Wind Turbines," Energies, MDPI, vol. 10(3), pages 1-20, March.
    6. Müller, Gerald & Chavushoglu, Mert & Kerri, Mark & Tsuzaki, Toru, 2017. "A resistance type vertical axis wind turbine for building integration," Renewable Energy, Elsevier, vol. 111(C), pages 803-814.
    7. Samuel Mitchell & Iheanyichukwu Ogbonna & Konstantin Volkov, 2021. "Improvement of Self-Starting Capabilities of Vertical Axis Wind Turbines with New Design of Turbine Blades," Sustainability, MDPI, vol. 13(7), pages 1-24, March.
    8. Yosra Chakroun & Galih Bangga, 2021. "Aerodynamic Characteristics of Airfoil and Vertical Axis Wind Turbine Employed with Gurney Flaps," Sustainability, MDPI, vol. 13(8), pages 1-22, April.
    9. Hyeonmu Jang & Dongmyeong Kim & Yechan Hwang & Insu Paek & Seungjoo Kim & Joonho Baek, 2019. "Analysis of Archimedes Spiral Wind Turbine Performance by Simulation and Field Test," Energies, MDPI, vol. 12(24), pages 1-11, December.
    10. Fang Feng & Guoqiang Tong & Yunfei Ma & Yan Li, 2021. "Numerical Simulation and Wind Tunnel Investigation on Static Characteristics of VAWT Rotor Starter with Lift-Drag Combined Structure," Energies, MDPI, vol. 14(19), pages 1-24, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Qiang Gao & Shuai Lian & Hongwei Yan, 2022. "Aerodynamic Performance Analysis of Adaptive Drag-Lift Hybrid Type Vertical Axis Wind Turbine," Energies, MDPI, vol. 15(15), pages 1-15, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fanel Dorel Scheaua, 2020. "Comparative Numerical Analysis on Vertical Wind Turbine Rotor Pattern of Bach and Benesh Type," Energies, MDPI, vol. 13(9), pages 1-20, May.
    2. Scheaua Fanel Dorel & Goanta Adrian Mihai & Dragan Nicusor, 2021. "Review of Specific Performance Parameters of Vertical Wind Turbine Rotors Based on the SAVONIUS Type," Energies, MDPI, vol. 14(7), pages 1-23, April.
    3. Salleh, Mohd Badrul & Kamaruddin, Noorfazreena M. & Mohamed-Kassim, Zulfaa, 2022. "Experimental investigation on the effects of deflector angles on the power performance of a Savonius turbine for hydrokinetic applications in small rivers," Energy, Elsevier, vol. 247(C).
    4. Marco A. Moreno-Armendáriz & Eddy Ibarra-Ontiveros & Hiram Calvo & Carlos A. Duchanoy, 2021. "Integrated Surrogate Optimization of a Vertical Axis Wind Turbine," Energies, MDPI, vol. 15(1), pages 1-21, December.
    5. Baoshou Zhang & Baowei Song & Zhaoyong Mao & Wenlong Tian & Boyang Li & Bo Li, 2017. "A Novel Parametric Modeling Method and Optimal Design for Savonius Wind Turbines," Energies, MDPI, vol. 10(3), pages 1-20, March.
    6. Jan Michna & Krzysztof Rogowski, 2022. "CFD Calculations of Average Flow Parameters around the Rotor of a Savonius Wind Turbine," Energies, MDPI, vol. 16(1), pages 1-17, December.
    7. Oscar Garcia & Alain Ulazia & Mario del Rio & Sheila Carreno-Madinabeitia & Andoni Gonzalez-Arceo, 2019. "An Energy Potential Estimation Methodology and Novel Prototype Design for Building-Integrated Wind Turbines," Energies, MDPI, vol. 12(10), pages 1-21, May.
    8. Guo, Fen & Song, Baowei & Mao, Zhaoyong & Tian, Wenlong, 2020. "Experimental and numerical validation of the influence on Savonius turbine caused by rear deflector," Energy, Elsevier, vol. 196(C).
    9. Mohammadi, M. & Mohammadi, R. & Ramadan, A. & Mohamed, M.H., 2018. "Numerical investigation of performance refinement of a drag wind rotor using flow augmentation and momentum exchange optimization," Energy, Elsevier, vol. 158(C), pages 592-606.
    10. Montelpare, Sergio & D'Alessandro, Valerio & Zoppi, Andrea & Ricci, Renato, 2018. "Experimental study on a modified Savonius wind rotor for street lighting systems. Analysis of external appendages and elements," Energy, Elsevier, vol. 144(C), pages 146-158.
    11. Ducoin, A. & Shadloo, M.S. & Roy, S., 2017. "Direct Numerical Simulation of flow instabilities over Savonius style wind turbine blades," Renewable Energy, Elsevier, vol. 105(C), pages 374-385.
    12. Lee, Jae-Hoon & Lee, Young-Tae & Lim, Hee-Chang, 2016. "Effect of twist angle on the performance of Savonius wind turbine," Renewable Energy, Elsevier, vol. 89(C), pages 231-244.
    13. Wong, Kok Hoe & Chong, Wen Tong & Sukiman, Nazatul Liana & Poh, Sin Chew & Shiah, Yui-Chuin & Wang, Chin-Tsan, 2017. "Performance enhancements on vertical axis wind turbines using flow augmentation systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 904-921.
    14. Tummala, Abhishiktha & Velamati, Ratna Kishore & Sinha, Dipankur Kumar & Indraja, V. & Krishna, V. Hari, 2016. "A review on small scale wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1351-1371.
    15. Tartuferi, Mariano & D'Alessandro, Valerio & Montelpare, Sergio & Ricci, Renato, 2015. "Enhancement of Savonius wind rotor aerodynamic performance: a computational study of new blade shapes and curtain systems," Energy, Elsevier, vol. 79(C), pages 371-384.
    16. Noman, Abdullah Al & Tasneem, Zinat & Sahed, Md. Fahad & Muyeen, S.M. & Das, Sajal K. & Alam, Firoz, 2022. "Towards next generation Savonius wind turbine: Artificial intelligence in blade design trends and framework," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    17. Can Kang & Wisdom Opare & Chen Pan & Ziwen Zou, 2018. "Upstream Flow Control for the Savonius Rotor under Various Operation Conditions," Energies, MDPI, vol. 11(6), pages 1-20, June.
    18. Krzysztof Sobczak & Damian Obidowski & Piotr Reorowicz & Emil Marchewka, 2020. "Numerical Investigations of the Savonius Turbine with Deformable Blades," Energies, MDPI, vol. 13(14), pages 1-20, July.
    19. Wang, Lu & Yeung, Ronald W., 2016. "On the performance of a micro-scale Bach-type turbine as predicted by discrete-vortex simulations," Applied Energy, Elsevier, vol. 183(C), pages 823-836.
    20. Chan, C.M. & Bai, H.L. & He, D.Q., 2018. "Blade shape optimization of the Savonius wind turbine using a genetic algorithm," Applied Energy, Elsevier, vol. 213(C), pages 148-157.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:7:p:2478-:d:781249. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.