IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i23p8965-d985553.html
   My bibliography  Save this article

Study on Fatigue Characteristics of Axial-Flow Pump Based on Two-Way Fluid–Structure Coupling

Author

Listed:
  • Yalei Bai

    (School of Aeronautics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)

  • Donglei Wu

    (School of Energy and Electrical Engineering, Ho Hai University, Nanjing 210016, China)

Abstract

When an axial-flow pump is running, there is a very complex flow inside the runner. Based on the two-way fluid–structure coupling method, this paper simulated the forward and reverse operating conditions of an axial-flow pump and calculated the dynamic stress distribution on the blade surface. The stress load spectrum was loaded onto the blade, and fatigue characteristic analysis was carried out to obtain the fatigue life and damage of the blade. This research shows the following: under different working conditions, the dynamic stress is concentrated at the root of the blade, and its amplitude decreases with the increase in the flow rate; at the same time, the change in stress with time shows a periodic change law. Under the working conditions of the turbine, the main frequency is the rotational frequency, and the secondary frequency is composed of multipliers of the rotational frequency, which is obviously affected by the number of blades; the fatigue damage and stress distribution are consistent, and the damage is the most serious at the stress concentration point. The research results of this paper can provide theoretical guidance for the structural design and safe operation of axial-flow pumps.

Suggested Citation

  • Yalei Bai & Donglei Wu, 2022. "Study on Fatigue Characteristics of Axial-Flow Pump Based on Two-Way Fluid–Structure Coupling," Energies, MDPI, vol. 15(23), pages 1-18, November.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:23:p:8965-:d:985553
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/23/8965/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/23/8965/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ji, Leilei & Li, Wei & Shi, Weidong & Tian, Fei & Agarwal, Ramesh, 2021. "Effect of blade thickness on rotating stall of mixed-flow pump using entropy generation analysis," Energy, Elsevier, vol. 236(C).
    2. Hao, Yue & Tan, Lei, 2018. "Symmetrical and unsymmetrical tip clearances on cavitation performance and radial force of a mixed flow pump as turbine at pump mode," Renewable Energy, Elsevier, vol. 127(C), pages 368-376.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fan, Zhixin & Zhu, Caichao, 2019. "The optimization and the application for the wind turbine power-wind speed curve," Renewable Energy, Elsevier, vol. 140(C), pages 52-61.
    2. Huang, Zhenwei & Huang, Zhenyou & Fan, Honggang, 2020. "Influence of C groove on energy performance and noise source of a NACA0009 hydrofoil with tip clearance," Renewable Energy, Elsevier, vol. 159(C), pages 726-735.
    3. Shi, Guangtai & Liu, Zongku & Xiao, Yexiang & Li, Helin & Liu, Xiaobing, 2020. "Tip leakage vortex trajectory and dynamics in a multiphase pump at off-design condition," Renewable Energy, Elsevier, vol. 150(C), pages 703-711.
    4. Yu Song & Honggang Fan & Wei Zhang & Zhifeng Xie, 2019. "Flow Characteristics in Volute of a Double-Suction Centrifugal Pump with Different Impeller Arrangements," Energies, MDPI, vol. 12(4), pages 1-15, February.
    5. Rossi, Mosè & Nigro, Alessandra & Renzi, Massimiliano, 2019. "Experimental and numerical assessment of a methodology for performance prediction of Pumps-as-Turbines (PaTs) operating in off-design conditions," Applied Energy, Elsevier, vol. 248(C), pages 555-566.
    6. Sinagra, Marco & Aricò, Costanza & Tucciarelli, Tullio & Morreale, Gabriele, 2020. "Experimental and numerical analysis of a backpressure Banki inline turbine for pressure regulation and energy production," Renewable Energy, Elsevier, vol. 149(C), pages 980-986.
    7. Alemi Arani, Hamed & Fathi, Mohammad & Raisee, Mehrdad & Nourbakhsh, Seyed Ahmad, 2019. "The effect of tongue geometry on pump performance in reverse mode: An experimental study," Renewable Energy, Elsevier, vol. 141(C), pages 717-727.
    8. Yang, Gang & Shen, Xi & Shi, Lei & Zhang, Desheng & Zhao, Xutao & (Bart) van Esch, B.P.M., 2023. "Numerical investigation of hump characteristic improvement in a large vertical centrifugal pump with special emphasis on energy loss mechanism," Energy, Elsevier, vol. 273(C).
    9. Li, Wei & Li, Enda & Ji, Leilei & Zhou, Ling & Shi, Weidong & Zhu, Yong, 2020. "Mechanism and propagation characteristics of rotating stall in a mixed-flow pump," Renewable Energy, Elsevier, vol. 153(C), pages 74-92.
    10. Venturini, Mauro & Manservigi, Lucrezia & Alvisi, Stefano & Simani, Silvio, 2018. "Development of a physics-based model to predict the performance of pumps as turbines," Applied Energy, Elsevier, vol. 231(C), pages 343-354.
    11. Liu, Ming & Tan, Lei & Cao, Shuliang, 2019. "Dynamic mode decomposition of gas-liquid flow in a rotodynamic multiphase pump," Renewable Energy, Elsevier, vol. 139(C), pages 1159-1175.
    12. Kan, Kan & Binama, Maxime & Chen, Huixiang & Zheng, Yuan & Zhou, Daqing & Su, Wentao & Muhirwa, Alexis, 2022. "Pump as turbine cavitation performance for both conventional and reverse operating modes: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    13. Ye, Weixiang & Geng, Chen & Luo, Xianwu, 2022. "Unstable flow characteristics in vaneless region with emphasis on the rotor-stator interaction for a pump turbine at pump mode using large runner blade lean," Renewable Energy, Elsevier, vol. 185(C), pages 1343-1361.
    14. Lin, Yanpi & Li, Xiaojun & Zhu, Zuchao & Wang, Xunming & Lin, Tong & Cao, Haibin, 2022. "An energy consumption improvement method for centrifugal pump based on bionic optimization of blade trailing edge," Energy, Elsevier, vol. 246(C).
    15. Jiao, Weixuan & Chen, Hongjun & Cheng, Li & Zhang, Bowen & Gu, Yangdong, 2023. "Energy loss and pressure fluctuation characteristics of coastal two-way channel pumping stations under the ultra-low head condition," Energy, Elsevier, vol. 278(PA).
    16. Liu, Ming & Tan, Lei & Cao, Shuliang, 2019. "Dynamic mode decomposition of cavitating flow around ALE 15 hydrofoil," Renewable Energy, Elsevier, vol. 139(C), pages 214-227.
    17. Honggang Fan & Jinsong Zhang & Wei Zhang & Bing Liu, 2020. "Multiparameter and Multiobjective Optimization Design Based on Orthogonal Method for Mixed Flow Fan," Energies, MDPI, vol. 13(11), pages 1-15, June.
    18. Zhang, Han & Gao, Xueping & Sun, Bowen & Qin, Zixue & Zhu, Hongtao, 2020. "Parameter analysis and performance optimization for the vertical pipe intake-outlet of a pumped hydro energy storage station," Renewable Energy, Elsevier, vol. 162(C), pages 1499-1518.
    19. Sun, Yang & Yao, Yuting & Yan, Min & Liu, Jiaming & Li, Haimiao & Bao, Yan & Lu, Mingwei, 2019. "Energy conversion efficiency from low-head water to high-pressure gas," Renewable Energy, Elsevier, vol. 138(C), pages 1-10.
    20. Bozorgasareh, Hamidreza & Khalesi, Javad & Jafari, Mohammad & Gazori, Heshmat Olah, 2021. "Performance improvement of mixed-flow centrifugal pumps with new impeller shrouds: Numerical and experimental investigations," Renewable Energy, Elsevier, vol. 163(C), pages 635-648.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:23:p:8965-:d:985553. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.