IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i21p5770-d439811.html
   My bibliography  Save this article

A General and Accurate Measurement Procedure for the Detection of Power Losses Variations in Permanent Magnet Synchronous Motor Drives

Author

Listed:
  • Massimo Caruso

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

  • Antonino Oscar Di Tommaso

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

  • Giuseppe Lisciandrello

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

  • Rosa Anna Mastromauro

    (Department of Information Engineering, University of Florence, 50139 Florence, Italy)

  • Rosario Miceli

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

  • Claudio Nevoloso

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

  • Ciro Spataro

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

  • Marco Trapanese

    (Department of Engineering, University of Palermo, Viale Delle Scienze, Parco D’Orleans, 90128 Palermo, Italy)

Abstract

The research of innovative solutions to improve the efficiency of electric drives is of considerable interest to challenges related to energy savings and sustainable development. In order to successfully validate the adoption of new and innovative software or hardware solutions in the field of electric drives, accurate measurement procedures for either efficiency or power losses are needed. Moreover, high accuracy and expensive measurement equipment are required to satisfy international standard prescriptions. In this scenario, this paper describes an accurate measurement procedure, which is independent of the accuracy of the adopted instrumentation, for the power losses variations involved in electrical drives, namely ΔΔ P , useful to detect the efficiency enhancement (or power losses reduction) due to the real-time modification of the related control algorithm. The goal is to define a valuable measurement procedure capable of comparing the impact of different control algorithms on electric drive performance. This procedure is carried out by experimentally verifying the action of different control algorithms by the use of a Field Oriented Control (FOC) with different values of the direct-axis current component (i.e., I d = 0 A and I d = −1 A) applied for fixed working conditions in terms of speed and load torque. Two different measurement systems of power losses, each one characterized by different accuracy and cost, are taken into account for the validation of the proposed method. An investigation is, then, carried out, based on the comparison between the measurements acquired by both instrumentations, for different working conditions in terms of load and speed, highlighting that the uncertainty generated by systematic errors does not affect the ΔΔ P measurements. The results reported in this work demonstrate how the ΔΔ P parameter can be used as a valuable index for the characterization of the power drive system, which can also be evaluated even with low-accuracy instrumentation.

Suggested Citation

  • Massimo Caruso & Antonino Oscar Di Tommaso & Giuseppe Lisciandrello & Rosa Anna Mastromauro & Rosario Miceli & Claudio Nevoloso & Ciro Spataro & Marco Trapanese, 2020. "A General and Accurate Measurement Procedure for the Detection of Power Losses Variations in Permanent Magnet Synchronous Motor Drives," Energies, MDPI, vol. 13(21), pages 1-19, November.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:21:p:5770-:d:439811
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/21/5770/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/21/5770/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Mengting Ye & Tingna Shi & Huimin Wang & Xinmin Li & Changliang Xia, 2019. "Sensorless-MTPA Control of Permanent Magnet Synchronous Motor Based on an Adaptive Sliding Mode Observer," Energies, MDPI, vol. 12(19), pages 1-15, October.
    2. Jianxia Sun & Cheng Lin & Jilei Xing & Xiongwei Jiang, 2019. "Online MTPA Trajectory Tracking of IPMSM Based on a Novel Torque Control Strategy," Energies, MDPI, vol. 12(17), pages 1-10, August.
    3. Shumei Cui & Tianxu Zhao & Bochao Du & Yuan Cheng, 2020. "Multiphase PMSM with Asymmetric Windings for Electric Drive," Energies, MDPI, vol. 13(15), pages 1-16, July.
    4. Andrzej Łebkowski, 2018. "Design, Analysis of the Location and Materials of Neodymium Magnets on the Torque and Power of In-Wheel External Rotor PMSM for Electric Vehicles," Energies, MDPI, vol. 11(9), pages 1-23, August.
    5. Filip Kutt & Michał Michna & Grzegorz Kostro, 2020. "Non-Salient Brushless Synchronous Generator Main Exciter Design for More Electric Aircraft," Energies, MDPI, vol. 13(11), pages 1-17, May.
    6. Marcel Torrent & José Ignacio Perat & José Antonio Jiménez, 2018. "Permanent Magnet Synchronous Motor with Different Rotor Structures for Traction Motor in High Speed Trains," Energies, MDPI, vol. 11(6), pages 1-17, June.
    7. Karolis Dambrauskas & Jonas Vanagas & Tomas Zimnickas & Artūras Kalvaitis & Mindaugas Ažubalis, 2020. "A Method for Efficiency Determination of Permanent Magnet Synchronous Motor," Energies, MDPI, vol. 13(4), pages 1-15, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Branislav Dobrucky & Slavomir Kascak & Michal Frivaldsky & Michal Prazenica, 2021. "Determination and Compensation of Non-Active Torques for Parallel HEV Using PMSM/IM Motor(s)," Energies, MDPI, vol. 14(10), pages 1-26, May.
    2. Krzysztof Tomczyk & Marek Sieja & Grzegorz Nowakowski, 2021. "Application of Identification Reference Nets for the Preliminary Modeling on the Example of Electrical Machines," Energies, MDPI, vol. 14(11), pages 1-15, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Anton Dianov & Alecksey Anuchin, 2021. "Design of Constraints for Seeking Maximum Torque per Ampere Techniques in an Interior Permanent Magnet Synchronous Motor Control," Mathematics, MDPI, vol. 9(21), pages 1-21, November.
    2. Anton Dianov & Alecksey Anuchin, 2020. "Adaptive Maximum Torque per Ampere Control of Sensorless Permanent Magnet Motor Drives," Energies, MDPI, vol. 13(19), pages 1-13, September.
    3. Klemen Drobnič & Lovrenc Gašparin & Rastko Fišer, 2019. "Fast and Accurate Model of Interior Permanent-Magnet Machine for Dynamic Characterization," Energies, MDPI, vol. 12(5), pages 1-20, February.
    4. Zeyu Cheng & Zhi Cao & John T. Hwang & Chris Mi, 2023. "A Novel Single-Turn Permanent Magnet Synchronous Machine for Electric Aircraft," Energies, MDPI, vol. 16(3), pages 1-14, January.
    5. Kang Wang & Ruituo Huai & Zhihao Yu & Xiaoyang Zhang & Fengjuan Li & Luwei Zhang, 2019. "Comparison Study of Induction Motor Models Considering Iron Loss for Electric Drives," Energies, MDPI, vol. 12(3), pages 1-13, February.
    6. İrfan Güven Çömezoğlu & Sibel Zorlu Partal, 2022. "Implementation and Experimental Validation of Efficiency Improvement in PM Synchronous Hub Motors for Light Electric Vehicles," Energies, MDPI, vol. 15(21), pages 1-23, October.
    7. Petter Eklund & Sandra Eriksson, 2019. "The Influence of Permanent Magnet Material Properties on Generator Rotor Design," Energies, MDPI, vol. 12(7), pages 1-19, April.
    8. Hyunjae Lee & Gunbok Lee & Gildong Kim & Jingeun Shon, 2022. "Variable Incremental Controller of Permanent-Magnet Synchronous Motor for Voltage-Based Flux-Weakening Control," Energies, MDPI, vol. 15(15), pages 1-15, August.
    9. Sajjad Ahmadi & Thierry Lubin & Abolfazl Vahedi & Nasser Taghavi, 2021. "Sensitivity-Based Optimization of Interior Permanent Magnet Synchronous Motor for Torque Characteristic Enhancement," Energies, MDPI, vol. 14(8), pages 1-15, April.
    10. Marcin Jastrzębski & Jacek Kabziński, 2021. "Approximation of Permanent Magnet Motor Flux Distribution by Partially Informed Neural Networks," Energies, MDPI, vol. 14(18), pages 1-21, September.
    11. Hassan Mohammadi Pirouz & Amin Hajizadeh, 2020. "A Highly Reliable Propulsion System with Onboard Uninterruptible Power Supply for Train Application: Topology and Control," Sustainability, MDPI, vol. 12(10), pages 1-30, May.
    12. Youguang Guo & Lin Liu & Xin Ba & Haiyan Lu & Gang Lei & Wenliang Yin & Jianguo Zhu, 2022. "Measurement and Modeling of Magnetic Materials under 3D Vectorial Magnetization for Electrical Machine Design and Analysis," Energies, MDPI, vol. 16(1), pages 1-11, December.
    13. Zhimeng Rao & Wenjuan Zhang & Gongping Wu & Jian Zheng & Shoudao Huang, 2020. "Characteristic Analysis and Predictive Torque Control of the Modular Three-Phase PMSM for Low-Voltage High Power Application," Energies, MDPI, vol. 13(21), pages 1-20, October.
    14. Mitsuhide Sato & Keigo Takazawa & Manabu Horiuchi & Ryoken Masuda & Ryo Yoshida & Masami Nirei & Yinggang Bu & Tsutomu Mizuno, 2020. "Reducing Rotor Temperature Rise in Concentrated Winding Motor by Using Magnetic Powder Mixed Resin Ring," Energies, MDPI, vol. 13(24), pages 1-15, December.
    15. Ryszard Palka & Kamil Cierzniewski & Marcin Wardach & Pawel Prajzendanc, 2023. "Research on Innovative Hybrid Excited Synchronous Machine," Energies, MDPI, vol. 16(18), pages 1-14, September.
    16. Soo-Hwan Park & Eui-Chun Lee & Gi-Ju Lee & Soon-O. Kwon & Myung-Seop Lim, 2021. "Effect of Pole and Slot Combination on the AC Joule Loss of Outer-Rotor Permanent Magnet Synchronous Motors Using a High Fill Factor Machined Coil," Energies, MDPI, vol. 14(11), pages 1-11, May.
    17. Yujiao Zhao & Haisheng Yu & Shixian Wang, 2021. "An Improved Super-Twisting High-Order Sliding Mode Observer for Sensorless Control of Permanent Magnet Synchronous Motor," Energies, MDPI, vol. 14(19), pages 1-18, September.
    18. Ahmed Belkhadir & Remus Pusca & Driss Belkhayat & Raphaël Romary & Youssef Zidani, 2023. "Analytical Modeling, Analysis and Diagnosis of External Rotor PMSM with Stator Winding Unbalance Fault," Energies, MDPI, vol. 16(7), pages 1-23, April.
    19. Francesco Piraino & Petronilla Fragiacomo, 2020. "Design of an Equivalent Consumption Minimization Strategy-Based Control in Relation to the Passenger Number for a Fuel Cell Tram Propulsion," Energies, MDPI, vol. 13(15), pages 1-16, August.
    20. Konrad Urbanski & Dariusz Janiszewski, 2021. "Position Estimation at Zero Speed for PMSMs Using Artificial Neural Networks," Energies, MDPI, vol. 14(23), pages 1-17, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:21:p:5770-:d:439811. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.