IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i2p213-d196577.html
   My bibliography  Save this article

Effects of Fuel Type and Operation Parameters on Combustion and NO x Emission of the Iron Ore Sintering Process

Author

Listed:
  • Wenjie Ni

    (School of Metallurgy, Northeastern University, Shenyang 110819, China
    Key Laboratory of Ecological Utilization of Multi-Metallic Mineral of Education Ministry, Northeastern University, Shenyang 110819, China)

  • Haifeng Li

    (School of Metallurgy, Northeastern University, Shenyang 110819, China
    Key Laboratory of Ecological Utilization of Multi-Metallic Mineral of Education Ministry, Northeastern University, Shenyang 110819, China)

  • Yingyi Zhang

    (School of Metallurgical Engineering, Anhui University of Technology, Maanshan 243002, China
    School of Material Science and Engineering, Chongqing University, Chongqing 400030, China)

  • Zongshu Zou

    (School of Metallurgy, Northeastern University, Shenyang 110819, China
    Key Laboratory of Ecological Utilization of Multi-Metallic Mineral of Education Ministry, Northeastern University, Shenyang 110819, China)

Abstract

A transient two-dimensional mathematical model is developed to study the influence of fuel type and operation parameters on combustion and NO x emission during the iron ore sintering process. The model was validated by comparing the model predictions with sintering pot test data. The predictions show reasonable agreement with the averaged values of the test data. In addition to the conventional sintering process, this model can also predict new processes such as flue gas recirculation, gas fuel injection, and fuel layered distribution. The simulation results show that the fuel NO x is the main part of the NO x emission during sintering, and thermal NO x forms a very little part. The produced NO x can be reduced not only by coke but also by CO around coke particles, with reduction proportions of 50% and 10%, respectively. Two types of coke A and B were compared. With Coke A as solid fuel and consumption of 3.8%, the NO x emission was 320 ppm. Increasing the replacement of Coke A with Coke B, the NO x emission was decreased, being decreased by 28.13% to 230 ppm with the replacement proportion of 50%. When only Coke B was used, the NO x emissions could be lowered by 53.13% to 150 ppm. Decreasing the particle size from 1.6 mm to 1.2 mm led the NO x emission to be increased by 10.93% from 320 ppm to 355 ppm. With Coke A as the only solid fuel, increasing the fuel ratio to 4.2% led the NO x emission to be increased by 9.38% to 350 ppm; increasing the oxygen content of inlet air from 21% to 30% led the NO x emission to be increased by 15.00% from 320 ppm to 368 ppm.

Suggested Citation

  • Wenjie Ni & Haifeng Li & Yingyi Zhang & Zongshu Zou, 2019. "Effects of Fuel Type and Operation Parameters on Combustion and NO x Emission of the Iron Ore Sintering Process," Energies, MDPI, vol. 12(2), pages 1-21, January.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:2:p:213-:d:196577
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/2/213/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/2/213/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Pahlevaninezhad, Masoud & Davazdah Emami, Mohsen & Panjepour, Masoud, 2014. "The effects of kinetic parameters on combustion characteristics in a sintering bed," Energy, Elsevier, vol. 73(C), pages 160-176.
    2. Cheng, Zhilong & Wang, Jingyu & Wei, Shangshang & Guo, Zhigang & Yang, Jian & Wang, Qiuwang, 2017. "Optimization of gaseous fuel injection for saving energy consumption and improving imbalance of heat distribution in iron ore sintering," Applied Energy, Elsevier, vol. 207(C), pages 230-242.
    3. Hashimoto, Nozomu & Watanabe, Hiroaki & Kurose, Ryoichi & Shirai, Hiromi, 2017. "Effect of different fuel NO models on the prediction of NO formation/reduction characteristics in a pulverized coal combustion field," Energy, Elsevier, vol. 118(C), pages 47-59.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Xiao-Hui & Feng, Peng & Xu, Jia-Rui & Feng, Li-Bin & Qing, Shan, 2020. "Numerical research on combining flue gas recirculation sintering and fuel layered distribution sintering in the iron ore sintering process," Energy, Elsevier, vol. 192(C).
    2. Yadav, Sujeet & Yu, Panlong & Tanno, Kenji & Watanabe, Hiroaki, 2023. "Large eddy simulation of coal-ammonia flames with varied ammonia injection locations using a flamelet-based approach," Energy, Elsevier, vol. 276(C).
    3. YuSheng Kong & Rabnawaz Khan, 2019. "To examine environmental pollution by economic growth and their impact in an environmental Kuznets curve (EKC) among developed and developing countries," PLOS ONE, Public Library of Science, vol. 14(3), pages 1-23, March.
    4. Gul, Eid & Riva, Lorenzo & Nielsen, Henrik Kofoed & Yang, Haiping & Zhou, Hewen & Yang, Qing & Skreiberg, Øyvind & Wang, Liang & Barbanera, Marco & Zampilli, Mauro & Bartocci, Pietro & Fantozzi, Franc, 2021. "Substitution of coke with pelletized biocarbon in the European and Chinese steel industries: An LCA analysis," Applied Energy, Elsevier, vol. 304(C).
    5. Suopajärvi, Hannu & Umeki, Kentaro & Mousa, Elsayed & Hedayati, Ali & Romar, Henrik & Kemppainen, Antti & Wang, Chuan & Phounglamcheik, Aekjuthon & Tuomikoski, Sari & Norberg, Nicklas & Andefors, Alf , 2018. "Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies," Applied Energy, Elsevier, vol. 213(C), pages 384-407.
    6. Luo, Kun & Zhao, Chunguang & Wen, Xu & Gao, Zhengwei & Bai, Yun & Xing, Jiangkuan & Fan, Jianren, 2019. "A priori study of an extended flamelet/progress variable model for NO prediction in pulverized coal flames," Energy, Elsevier, vol. 175(C), pages 768-780.
    7. Juntao Han & Guofeng Lou & Sizong Zhang & Zhi Wen & Xunliang Liu & Jiada Liu, 2019. "The Effects of Coke Parameters and Circulating Flue Gas Characteristics on NOx Emission during Flue Gas Recirculation Sintering Process," Energies, MDPI, vol. 12(20), pages 1-20, October.
    8. Guanghui Li & Chen Liu & Zhengwei Yu & Mingjun Rao & Qiang Zhong & Yuanbo Zhang & Tao Jiang, 2018. "Energy Saving of Composite Agglomeration Process (CAP) by Optimized Distribution of Pelletized Feed," Energies, MDPI, vol. 11(9), pages 1-12, September.
    9. Cheng, Zhilong & Tan, Zhoutuo & Guo, Zhigang & Yang, Jian & Wang, Qiuwang, 2020. "Recent progress in sustainable and energy-efficient technologies for sinter production in the iron and steel industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 131(C).
    10. Cheng, Zhilong & Yang, Jian & Zhou, Lang & Liu, Yan & Wang, Qiuwang, 2016. "Characteristics of charcoal combustion and its effects on iron-ore sintering performance," Applied Energy, Elsevier, vol. 161(C), pages 364-374.
    11. Liu, Yan & Yang, Jian & Wang, Jing-yu & Ding, Xu-gang & Cheng, Zhi-long & Wang, Qiu-wang, 2015. "Prediction, parametric analysis and bi-objective optimization of waste heat utilization in sinter cooling bed using evolutionary algorithm," Energy, Elsevier, vol. 90(P1), pages 24-35.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:2:p:213-:d:196577. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.