IDEAS home Printed from https://ideas.repec.org/a/eee/transe/v48y2012i4p795-806.html
   My bibliography  Save this article

A unit-load warehouse with multiple pickup and deposit points and non-traditional aisles

Author

Listed:
  • Gue, Kevin R.
  • Ivanović, Goran
  • Meller, Russell D.

Abstract

We show how to configure a cross aisle in a unit-load warehouse to facilitate travel between storage locations and multiple pickup and deposit points on one side. We use our models to investigate designs having two types of cross aisles—those that form a “Flying-V” and those that form an “Inverted-V.” Our numerical results suggest that there is a benefit to using a Flying-V aisle design, but the benefit is more modest than in the case of a single P&D point. Thus, to the extent practicable, pickup and deposit points should be concentrated toward the middle of the warehouse.

Suggested Citation

  • Gue, Kevin R. & Ivanović, Goran & Meller, Russell D., 2012. "A unit-load warehouse with multiple pickup and deposit points and non-traditional aisles," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 48(4), pages 795-806.
    • Handle: RePEc:eee:transe:v:48:y:2012:i:4:p:795-806
    DOI: 10.1016/j.tre.2012.01.002
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1366554512000117
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.tre.2012.01.002?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kevin Gue & Russell Meller, 2009. "Aisle configurations for unit-load warehouses," IISE Transactions, Taylor & Francis Journals, vol. 41(3), pages 171-182.
    2. Gu, Jinxiang & Goetschalckx, Marc & McGinnis, Leon F., 2007. "Research on warehouse operation: A comprehensive review," European Journal of Operational Research, Elsevier, vol. 177(1), pages 1-21, February.
    3. Pohl, Letitia M. & Meller, Russell D. & Gue, Kevin R., 2009. "An analysis of dual-command operations in common warehouse designs," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 45(3), pages 367-379, May.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hamzaoui, Mohammed A. & Arbaoui, Taha & Yalaoui, Farouk & Sari, Zaki, 2021. "An exact optimization method based on dominance properties for the design of AS/RSs," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 146(C).
    2. Yeliz Kocaman & Ömer Öztürkoğlu & Şevkinaz Gümüşoğlu, 2021. "Aisle designs in unit-load warehouses with different flow policies of multiple pickup and deposit points," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 29(1), pages 323-355, March.
    3. Çağla Cergibozan & A. Serdar Tasan, 2019. "Order batching operations: an overview of classification, solution techniques, and future research," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 335-349, January.
    4. Nima Zaerpour & Amir Gharehgozli & René De Koster, 2019. "Vertical Expansion: A Solution for Future Container Terminals," Transportation Science, INFORMS, vol. 53(5), pages 1235-1251, September.
    5. Li Zhou & Huwei Liu & Junhui Zhao & Fan Wang & Jianglong Yang, 2022. "Performance Analysis of Picking Routing Strategies in the Leaf Layout Warehouse," Mathematics, MDPI, vol. 10(17), pages 1-28, September.
    6. Bortolini, Marco & Faccio, Maurizio & Gamberi, Mauro & Manzini, Riccardo, 2015. "Diagonal cross-aisles in unit load warehouses to increase handling performance," International Journal of Production Economics, Elsevier, vol. 170(PC), pages 838-849.
    7. Xuan Zhang & Tiantian Mo & Yougong Zhang, 2023. "Optimization of Storage Location Assignment for Non-Traditional Layout Warehouses Based on the Firework Algorithm," Sustainability, MDPI, vol. 15(13), pages 1-21, June.
    8. Chen, Wanying (Amanda) & De Koster, René & Gong, Yeming, 2023. "Warehouses without aisles: Layout design of a multi-deep rack climbing robotic system," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 179(C).
    9. Amir Gharehgozli & Nima Zaerpour & Rene Koster, 2020. "Container terminal layout design: transition and future," Maritime Economics & Logistics, Palgrave Macmillan;International Association of Maritime Economists (IAME), vol. 22(4), pages 610-639, December.
    10. Öztürkoğlu, Ö. & Gue, K.R. & Meller, R.D., 2014. "A constructive aisle design model for unit-load warehouses with multiple pickup and deposit points," European Journal of Operational Research, Elsevier, vol. 236(1), pages 382-394.
    11. Krzysztof Dmytrow, 2020. "Impact of the Method of Criteria Normalisation on the Order Picking Route and Time," European Research Studies Journal, European Research Studies Journal, vol. 0(4), pages 834-851.
    12. Derhami, Shahab & Smith, Jeffrey S. & Gue, Kevin R., 2020. "A simulation-based optimization approach to design optimal layouts for block stacking warehouses," International Journal of Production Economics, Elsevier, vol. 223(C).
    13. Yang, Peng & Miao, Lixin & Xue, Zhaojie & Ye, Bin, 2015. "Variable neighborhood search heuristic for storage location assignment and storage/retrieval scheduling under shared storage in multi-shuttle automated storage/retrieval systems," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 79(C), pages 164-177.
    14. Cardona, Luis F. & Soto, Diego F. & Rivera, Leonardo & Martínez, Hector J., 2015. "Detailed design of fishbone warehouse layouts with vertical travel," International Journal of Production Economics, Elsevier, vol. 170(PC), pages 825-837.
    15. Öztürkoğlu, Ömer & Hoser, Deniz, 2019. "A discrete cross aisle design model for order-picking warehouses," European Journal of Operational Research, Elsevier, vol. 275(2), pages 411-430.
    16. Gharehgozli, A.H. & Roy, D. & de Koster, M.B.M., 2014. "Sea Container Terminals," ERIM Report Series Research in Management ERS-2014-009-LIS, Erasmus Research Institute of Management (ERIM), ERIM is the joint research institute of the Rotterdam School of Management, Erasmus University and the Erasmus School of Economics (ESE) at Erasmus University Rotterdam.
    17. van Gils, Teun & Caris, An & Ramaekers, Katrien & Braekers, Kris & de Koster, René B.M., 2019. "Designing efficient order picking systems: The effect of real-life features on the relationship among planning problems," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 125(C), pages 47-73.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Katrin Heßler & Stefan Irnich, 2023. "Exact Solution of the Single Picker Routing Problem with Scattered Storage," Working Papers 2303, Gutenberg School of Management and Economics, Johannes Gutenberg-Universität Mainz.
    2. Mowrey, Corinne H. & Parikh, Pratik J., 2014. "Mixed-width aisle configurations for order picking in distribution centers," European Journal of Operational Research, Elsevier, vol. 232(1), pages 87-97.
    3. Derhami, Shahab & Smith, Jeffrey S. & Gue, Kevin R., 2020. "A simulation-based optimization approach to design optimal layouts for block stacking warehouses," International Journal of Production Economics, Elsevier, vol. 223(C).
    4. Bortolini, Marco & Faccio, Maurizio & Gamberi, Mauro & Manzini, Riccardo, 2015. "Diagonal cross-aisles in unit load warehouses to increase handling performance," International Journal of Production Economics, Elsevier, vol. 170(PC), pages 838-849.
    5. Petra Kašparová & Jakub Dyntar, 2021. "Effective Designing of Order Picking Systems Using Dynamic Simulation," Acta Informatica Pragensia, Prague University of Economics and Business, vol. 2021(1), pages 108-120.
    6. Çağla Cergibozan & A. Serdar Tasan, 2019. "Order batching operations: an overview of classification, solution techniques, and future research," Journal of Intelligent Manufacturing, Springer, vol. 30(1), pages 335-349, January.
    7. Öztürkoğlu, Ö. & Gue, K.R. & Meller, R.D., 2014. "A constructive aisle design model for unit-load warehouses with multiple pickup and deposit points," European Journal of Operational Research, Elsevier, vol. 236(1), pages 382-394.
    8. Öztürkoğlu, Ömer & Hoser, Deniz, 2019. "A discrete cross aisle design model for order-picking warehouses," European Journal of Operational Research, Elsevier, vol. 275(2), pages 411-430.
    9. Heiko Diefenbach & Simon Emde & Christoph H. Glock & Eric H. Grosse, 2022. "New solution procedures for the order picker routing problem in U-shaped pick areas with a movable depot," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 44(2), pages 535-573, June.
    10. Rakesh Venkitasubramony & Gajendra K. Adil, 2016. "Analytical models for pick distances in fishbone warehouse based on exact distance contour," International Journal of Production Research, Taylor & Francis Journals, vol. 54(14), pages 4305-4326, July.
    11. Shahab Derhami & Jeffrey S. Smith & Kevin R. Gue, 2017. "Optimising space utilisation in block stacking warehouses," International Journal of Production Research, Taylor & Francis Journals, vol. 55(21), pages 6436-6452, November.
    12. Ang, Marcus & Lim, Yun Fong, 2019. "How to optimize storage classes in a unit-load warehouse," European Journal of Operational Research, Elsevier, vol. 278(1), pages 186-201.
    13. Boysen, Nils & de Koster, René & Füßler, David, 2021. "The forgotten sons: Warehousing systems for brick-and-mortar retail chains," European Journal of Operational Research, Elsevier, vol. 288(2), pages 361-381.
    14. Mofidi, Seyed Shahab & Pazour, Jennifer A. & Roy, Debjit, 2018. "Proactive vs. reactive order-fulfillment resource allocation for sea-based logistics," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 114(C), pages 66-84.
    15. Sainathuni, Bhanuteja & Parikh, Pratik J. & Zhang, Xinhui & Kong, Nan, 2014. "The warehouse-inventory-transportation problem for supply chains," European Journal of Operational Research, Elsevier, vol. 237(2), pages 690-700.
    16. Chen, Lu & Langevin, André & Riopel, Diane, 2011. "A tabu search algorithm for the relocation problem in a warehousing system," International Journal of Production Economics, Elsevier, vol. 129(1), pages 147-156, January.
    17. Thierry Sauvage & Tony Cragg & Sarrah Chraibi & Oussama El Khalil Houssaini, 2018. "Running the Machine Faster: Acceleration, Humans and Warehousing," Post-Print hal-02905068, HAL.
    18. Jone R. Hansen & Kjetil Fagerholt & Magnus Stålhane & Jørgen G. Rakke, 2020. "An adaptive large neighborhood search heuristic for the planar storage location assignment problem: application to stowage planning for Roll-on Roll-off ships," Journal of Heuristics, Springer, vol. 26(6), pages 885-912, December.
    19. Gianluca Nastasi & Valentina Colla & Silvia Cateni & Simone Campigli, 2018. "Implementation and comparison of algorithms for multi-objective optimization based on genetic algorithms applied to the management of an automated warehouse," Journal of Intelligent Manufacturing, Springer, vol. 29(7), pages 1545-1557, October.
    20. Parikh, Pratik J. & Meller, Russell D., 2010. "A travel-time model for a person-onboard order picking system," European Journal of Operational Research, Elsevier, vol. 200(2), pages 385-394, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:transe:v:48:y:2012:i:4:p:795-806. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600244/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.