IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v94y2016icp1-9.html
   My bibliography  Save this article

Impact of metals on corrosive behavior of biodiesel–diesel–ethanol (BDE) alternative fuel

Author

Listed:
  • Thangavelu, Saravana Kannan
  • Ahmed, Abu Saleh
  • Ani, Farid Nasir

Abstract

Corrosive behavior of biodiesel–diesel–ethanol (BDE) fuel blends upon exposure to metals, namely, mild steel, copper and aluminum was studied by static immersion at room temperature and 60 °C. The change of fuel properties, i.e., total acid number, density, viscosity, calorific value, flash point, and color changes were investigated. Moreover, fuel compositional changes, such as water content, oxidation product level, and metal elements in the fuel blends were examined. Finally, the effect of fuel blends on corrosion rate (CR), morphology of corrosion products, and chemical structure of metals were studied. Results revealed that the CR of metals in BDE fuels is in the order: aluminum < mild steel < copper at both temperature conditions. The degradation of fuel properties and corrosion rate of metals in BDE fuel blends are lower than neat biodiesel (B100), whereas higher than petro–diesel (B0). Corrosiveness of B20D75E5 is lower than B20D70E10 upon exposure to metals.

Suggested Citation

  • Thangavelu, Saravana Kannan & Ahmed, Abu Saleh & Ani, Farid Nasir, 2016. "Impact of metals on corrosive behavior of biodiesel–diesel–ethanol (BDE) alternative fuel," Renewable Energy, Elsevier, vol. 94(C), pages 1-9.
  • Handle: RePEc:eee:renene:v:94:y:2016:i:c:p:1-9
    DOI: 10.1016/j.renene.2016.03.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148116301999
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2016.03.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Shahir, S.A. & Masjuki, H.H. & Kalam, M.A. & Imran, A. & Fattah, I.M. Rizwanul & Sanjid, A., 2014. "Feasibility of diesel–biodiesel–ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 379-395.
    2. Chew, K.V. & Haseeb, A.S.M.A. & Masjuki, H.H. & Fazal, M.A. & Gupta, M., 2013. "Corrosion of magnesium and aluminum in palm biodiesel: A comparative evaluation," Energy, Elsevier, vol. 57(C), pages 478-483.
    3. Fazal, M.A. & Haseeb, A.S.M.A. & Masjuki, H.H., 2011. "Effect of temperature on the corrosion behavior of mild steel upon exposure to palm biodiesel," Energy, Elsevier, vol. 36(5), pages 3328-3334.
    4. Hu, Enzhu & Xu, Yufu & Hu, Xianguo & Pan, Lijun & Jiang, Shaotong, 2012. "Corrosion behaviors of metals in biodiesel from rapeseed oil and methanol," Renewable Energy, Elsevier, vol. 37(1), pages 371-378.
    5. Demirbas, Ayhan, 2011. "Competitive liquid biofuels from biomass," Applied Energy, Elsevier, vol. 88(1), pages 17-28, January.
    6. Fazal, M.A. & Haseeb, A.S.M.A. & Masjuki, H.H., 2012. "Degradation of automotive materials in palm biodiesel," Energy, Elsevier, vol. 40(1), pages 76-83.
    7. Shahir, S.A. & Masjuki, H.H. & Kalam, M.A. & Imran, A. & Ashraful, A.M., 2015. "Performance and emission assessment of diesel–biodiesel–ethanol/bioethanol blend as a fuel in diesel engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 62-78.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Rochelle, David & Najafi, Hamidreza, 2019. "A review of the effect of biodiesel on gas turbine emissions and performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 129-137.
    2. Rocabruno-Valdés, C.I. & González-Rodriguez, J.G. & Díaz-Blanco, Y. & Juantorena, A.U. & Muñoz-Ledo, J.A. & El-Hamzaoui, Y. & Hernández, J.A., 2019. "Corrosion rate prediction for metals in biodiesel using artificial neural networks," Renewable Energy, Elsevier, vol. 140(C), pages 592-601.
    3. Mukhtar, M.N.A. & Hagos, Ftwi Y. & Noor, M.M. & Mamat, Rizalman & Abdullah, A. Adam & Abd Aziz, Abd Rashid, 2019. "Tri-fuel emulsion with secondary atomization attributes for greener diesel engine – A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 111(C), pages 490-506.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kugelmeier, Cristie Luis & Monteiro, Marcos Roberto & da Silva, Rodrigo & Kuri, Sebastião Elias & Sordi, Vitor Luiz & Della Rovere, Carlos Alberto, 2021. "Corrosion behavior of carbon steel, stainless steel, aluminum and copper upon exposure to biodiesel blended with petrodiesel," Energy, Elsevier, vol. 226(C).
    2. Aamir Shehzad & Arslan Ahmed & Moinuddin Mohammed Quazi & Muhammad Jamshaid & S. M. Ashrafur Rahman & Masjuki Haji Hassan & Hafiz Muhammad Asif Javed, 2021. "Current Research and Development Status of Corrosion Behavior of Automotive Materials in Biofuels," Energies, MDPI, vol. 14(5), pages 1-36, March.
    3. Rocabruno-Valdés, C.I. & González-Rodriguez, J.G. & Díaz-Blanco, Y. & Juantorena, A.U. & Muñoz-Ledo, J.A. & El-Hamzaoui, Y. & Hernández, J.A., 2019. "Corrosion rate prediction for metals in biodiesel using artificial neural networks," Renewable Energy, Elsevier, vol. 140(C), pages 592-601.
    4. Jin, Dingfeng & Zhou, Xuehua & Wu, Panpan & Jiang, Li & Ge, Hongliang, 2015. "Corrosion behavior of ASTM 1045 mild steel in palm biodiesel," Renewable Energy, Elsevier, vol. 81(C), pages 457-463.
    5. Sundus, F. & Fazal, M.A. & Masjuki, H.H., 2017. "Tribology with biodiesel: A study on enhancing biodiesel stability and its fuel properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 399-412.
    6. E, Jiaqiang & Pham, Minhhieu & Zhao, D. & Deng, Yuanwang & Le, DucHieu & Zuo, Wei & Zhu, Hao & Liu, Teng & Peng, Qingguo & Zhang, Zhiqing, 2017. "Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 620-647.
    7. Serqueira, Dalyelli S. & Pereira, Jian F.S. & Squissato, André L. & Rodrigues, Mônica A. & Lima, Renata C. & Faria, Anízio M. & Richter, Eduardo M. & Munoz, Rodrigo A.A., 2021. "Oxidative stability and corrosivity of biodiesel produced from residual cooking oil exposed to copper and carbon steel under simulated storage conditions: Dual effect of antioxidants," Renewable Energy, Elsevier, vol. 164(C), pages 1485-1495.
    8. Thangarasu, Vinoth & Balaji, B. & Ramanathan, Anand, 2019. "Experimental investigation of tribo-corrosion and engine characteristics of Aegle Marmelos Correa biodiesel and its diesel blends on direct injection diesel engine," Energy, Elsevier, vol. 171(C), pages 879-892.
    9. Chew, K.V. & Haseeb, A.S.M.A. & Masjuki, H.H. & Fazal, M.A. & Gupta, M., 2013. "Corrosion of magnesium and aluminum in palm biodiesel: A comparative evaluation," Energy, Elsevier, vol. 57(C), pages 478-483.
    10. Mendiburu, Andrés Z. & Lauermann, Carlos H. & Hayashi, Thamy C. & Mariños, Diego J. & Rodrigues da Costa, Roberto Berlini & Coronado, Christian J.R. & Roberts, Justo J. & de Carvalho, João A., 2022. "Ethanol as a renewable biofuel: Combustion characteristics and application in engines," Energy, Elsevier, vol. 257(C).
    11. Hagos, Ftwi Y. & Ali, Obed M. & Mamat, Rizalman & Abdullah, Abdul A., 2017. "Effect of emulsification and blending on the oxygenation and substitution of diesel fuel for compression ignition engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1281-1294.
    12. Ghadikolaei, Meisam Ahmadi & Wong, Pak Kin & Cheung, Chun Shun & Ning, Zhi & Yung, Ka-Fu & Zhao, Jing & Gali, Nirmal Kumar & Berenjestanaki, Alireza Valipour, 2021. "Impact of lower and higher alcohols on the physicochemical properties of particulate matter from diesel engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    13. Jakeria, M.R. & Fazal, M.A. & Haseeb, A.S.M.A., 2014. "Influence of different factors on the stability of biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 154-163.
    14. Chandran, Davannendran, 2020. "Compatibility of diesel engine materials with biodiesel fuel," Renewable Energy, Elsevier, vol. 147(P1), pages 89-99.
    15. Singh, Paramvir & Varun, & Chauhan, S.R. & Kumar, Niraj, 2016. "A review on methodology for complete elimination of diesel from CI engines using mixed feedstock," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 1110-1125.
    16. Fernandes, David M. & Squissato, André L. & Lima, Alexandre F. & Richter, Eduardo M. & Munoz, Rodrigo A.A., 2019. "Corrosive character of Moringa oleifera Lam biodiesel exposed to carbon steel under simulated storage conditions," Renewable Energy, Elsevier, vol. 139(C), pages 1263-1271.
    17. Nawar Al-Esawi & Mansour Al Qubeissi & Ruslana Kolodnytska, 2019. "The Impact of Biodiesel Fuel on Ethanol/Diesel Blends," Energies, MDPI, vol. 12(9), pages 1-11, May.
    18. Geng, Peng & Cao, Erming & Tan, Qinming & Wei, Lijiang, 2017. "Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 523-534.
    19. Chen, Tao & Hu, Run-Ze & Yao, Xiao-Hui & Yang, Qiang & Shuai, Shi-Min & Wang, Jun & Xu, Ming & Zhang, Dong-Yang & Fu, Yu-Jie & Li, Long & Zhao, Wei-Guo, 2020. "Effect of Pyrola extract on the stability of palm biodiesel upon exposure to copper," Renewable Energy, Elsevier, vol. 149(C), pages 1282-1289.
    20. Saddam H. Al-lwayzy & Talal Yusaf, 2015. "Combustion of Microalgae Oil and Ethanol Blended with Diesel Fuel," Energies, MDPI, vol. 8(12), pages 1-11, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:94:y:2016:i:c:p:1-9. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.