IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v87y2016ip1p168-181.html
   My bibliography  Save this article

The identification of structurally sensitive zones subject to failure in a wind turbine blade using nodal displacement based finite element sub-modeling

Author

Listed:
  • Shah, Owaisur Rahman
  • Tarfaoui, Mostapha

Abstract

The wind turbine blades are complex structures in terms of their geometry and the materials used. They need to be modeled, on the one hand as accurately and precisely as possible, while on the other hand the models should be light enough to be run in a reasonable amount of time using reasonable computational resources. Sub-modeling is a technique used to reduce the domain size of a finite element model to a more manageable size. One of the motivations behind sub-modeling is the capacity to develop highly refined and detailed models, without using increased computational resources, as the refined model domain is small and hence has a smaller number of elements. There are different methods of sub dividing the problem domain into smaller simpler domains, of which the transfer of nodal displacement form one parent model to its child will be used in this study. Furthermore the use of surface to solid sub-models is also discussed.

Suggested Citation

  • Shah, Owaisur Rahman & Tarfaoui, Mostapha, 2016. "The identification of structurally sensitive zones subject to failure in a wind turbine blade using nodal displacement based finite element sub-modeling," Renewable Energy, Elsevier, vol. 87(P1), pages 168-181.
    • Handle: RePEc:eee:renene:v:87:y:2016:i:p1:p:168-181
    DOI: 10.1016/j.renene.2015.09.065
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014811530344X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2015.09.065?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Gebhardt, C.G. & Roccia, B.A., 2014. "Non-linear aeroelasticity: An approach to compute the response of three-blade large-scale horizontal-axis wind turbines," Renewable Energy, Elsevier, vol. 66(C), pages 495-514.
    2. El Chazly, N.M., 1993. "Static and dynamic analysis of wind turbine blades using the finite element method," Renewable Energy, Elsevier, vol. 3(6), pages 705-724.
    3. Kim, Taeseong & Hansen, Anders M. & Branner, Kim, 2013. "Development of an anisotropic beam finite element for composite wind turbine blades in multibody system," Renewable Energy, Elsevier, vol. 59(C), pages 172-183.
    4. Ji, Y.M. & Han, K.S., 2014. "Fracture mechanics approach for failure of adhesive joints in wind turbine blades," Renewable Energy, Elsevier, vol. 65(C), pages 23-28.
    5. Wang, Lin & Liu, Xiongwei & Guo, Lianggang & Renevier, Nathalie & Stables, Matthew, 2014. "A mathematical model for calculating cross-sectional properties of modern wind turbine composite blades," Renewable Energy, Elsevier, vol. 64(C), pages 52-60.
    6. Roth-Johnson, Perry & Wirz, Richard E. & Lin, Edward, 2014. "Structural design of spars for 100-m biplane wind turbine blades," Renewable Energy, Elsevier, vol. 71(C), pages 133-155.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mathijs Peeters & Gilberto Santo & Joris Degroote & Wim Van Paepegem, 2018. "Comparison of Shell and Solid Finite Element Models for the Static Certification Tests of a 43 m Wind Turbine Blade," Energies, MDPI, vol. 11(6), pages 1-18, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Wenyi, 2016. "Design and kinetic analysis of wind turbine blade-hub-tower coupled system," Renewable Energy, Elsevier, vol. 94(C), pages 547-557.
    2. Xu, Jin & Zhang, Lei & Li, Xue & Li, Shuang & Yang, Ke, 2020. "A study of dynamic response of a wind turbine blade based on the multi-body dynamics method," Renewable Energy, Elsevier, vol. 155(C), pages 358-368.
    3. Meng, Hang & Lien, Fue-Sang & Yee, Eugene & Shen, Jingfang, 2020. "Modelling of anisotropic beam for rotating composite wind turbine blade by using finite-difference time-domain (FDTD) method," Renewable Energy, Elsevier, vol. 162(C), pages 2361-2379.
    4. Wang, Lin & Liu, Xiongwei & Renevier, Nathalie & Stables, Matthew & Hall, George M., 2014. "Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory," Energy, Elsevier, vol. 76(C), pages 487-501.
    5. Jin, Xin & Ju, Wenbin & Zhang, Zhaolong & Guo, Lianxin & Yang, Xiangang, 2016. "System safety analysis of large wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1293-1307.
    6. Pavese, Christian & Kim, Taeseong & Murcia, Juan Pablo, 2017. "Design of a wind turbine swept blade through extensive load analysis," Renewable Energy, Elsevier, vol. 102(PA), pages 21-34.
    7. Liew, Jaime & Lio, Wai Hou & Urbán, Albert Meseguer & Holierhoek, Jessica & Kim, Taeseong, 2020. "Active tip deflection control for wind turbines," Renewable Energy, Elsevier, vol. 149(C), pages 445-454.
    8. Zuo, Yangjie & Montesano, John & Singh, Chandra Veer, 2018. "Assessing progressive failure in long wind turbine blades under quasi-static and cyclic loads," Renewable Energy, Elsevier, vol. 119(C), pages 754-766.
    9. Sessarego, Matias & Feng, Ju & Ramos-García, Néstor & Horcas, Sergio González, 2020. "Design optimization of a curved wind turbine blade using neural networks and an aero-elastic vortex method under turbulent inflow," Renewable Energy, Elsevier, vol. 146(C), pages 1524-1535.
    10. Bei Li & De Tian & Xiaoxuan Wu & Huiwen Meng & Yi Su, 2023. "The Impact of Bend–Twist Coupling on Structural Characteristics and Flutter Limit of Ultra-Long Flexible Wind Turbine Composite Blades," Energies, MDPI, vol. 16(15), pages 1-20, August.
    11. Ossai, Chinedu I., 2017. "Optimal renewable energy generation – Approaches for managing ageing assets mechanisms," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 269-280.
    12. Ozan Gözcü & Taeseong Kim & David Robert Verelst & Michael K. McWilliam, 2022. "Swept Blade Dynamic Investigations for a 100 kW Small Wind Turbine," Energies, MDPI, vol. 15(9), pages 1-22, April.
    13. Ebrahimi, Abbas & Sekandari, Mahmood, 2018. "Transient response of the flexible blade of horizontal-axis wind turbines in wind gusts and rapid yaw changes," Energy, Elsevier, vol. 145(C), pages 261-275.
    14. Lux, Philipp & Cassano, Alessandro G. & Johnson, Stephen B. & Maiaru, Marianna & Stapleton, Scott E., 2020. "Adhesive curing cycle time optimization in wind turbine blade manufacturing," Renewable Energy, Elsevier, vol. 162(C), pages 397-410.
    15. Kim, T. & Madsen, F.J. & Bredmose, H. & Pegalajar-Jurado, A., 2023. "Numerical analysis and comparison study of the 1:60 scaled DTU 10 MW TLP floating wind turbine," Renewable Energy, Elsevier, vol. 202(C), pages 210-221.
    16. Ilkiliç, Cumali & Türkbay, Ismail, 2010. "Determination and utilization of wind energy potential for Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(8), pages 2202-2207, October.
    17. Patrick D. Moroney & Amrit Shankar Verma, 2023. "Durability and Damage Tolerance Analysis Approaches for Wind Turbine Blade Trailing Edge Life Prediction: A Technical Review," Energies, MDPI, vol. 16(24), pages 1-33, December.
    18. Nezamolmolki, Davoud & Shooshtari, Ahmad, 2016. "Investigation of nonlinear dynamic behavior of lattice structure wind turbines," Renewable Energy, Elsevier, vol. 97(C), pages 33-46.
    19. Kim, Yusik & Madsen, Helge Aa & Aparicio-Sanchez, Maria & Pirrung, Georg & Lutz, Thorsten, 2020. "Assessment of blade element momentum codes under varying turbulence levels by comparing with blade resolved computational fluid dynamics," Renewable Energy, Elsevier, vol. 160(C), pages 788-802.
    20. Wang, Lin & Liu, Xiongwei & Kolios, Athanasios, 2016. "State of the art in the aeroelasticity of wind turbine blades: Aeroelastic modelling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 195-210.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:87:y:2016:i:p1:p:168-181. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.