IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v175y2021icp14-28.html
   My bibliography  Save this article

Development of novel form-stable phase change material (PCM) composite using recycled expanded glass for thermal energy storage in cementitious composite

Author

Listed:
  • Yousefi, Ali
  • Tang, Waiching
  • Khavarian, Mehrnoush
  • Fang, Cheng

Abstract

In the last decade, latent heat storage materials such as phase change materials (PCMs) have been increasingly seen as a promising solution in thermal energy storage (TES) systems to reduce heating and cooling energy demand in buildings. However, there are still some significant challenges to integrate PCM into building components. The main challenges are the difficulty of selecting appropriate PCM carriers which are not only compatible with building materials but also have a high absorption capacity while preventing the leakage of PCM. In this study, recycled expanded glass aggregate (EGA) was innovatively used as a PCM carrier to fabricate form-stable PCM composite. A high absorption ratio of 80% was measured for the EGA, and the leakage results from the diffusion-oozing circle test confirmed the stability of the EGA-PCM composite. The differential scanning calorimetry (DSC) analysis showed that the phase transition properties of the composite were slightly shifted, and its enthalpy decreased compared to the pure PCM. The thermogravimetric analysis (TGA) results showed that the composite exhibited good thermal stability. In addition, the thermal performance measurements demonstrated that using EGA-PCM composite can significantly reduce the heat transfer rate of the cement mortar up to 47%. Moreover, the microstructure studies revealed successful impregnation of PCM into the EGA and good interfacial bonding between the EGA-PCM composite and the cement matrix. Besides, a cost-benefit analysis of a case study building showed that although the costs of production and initial installation of EGA-PCM composite are relatively high, it is more beneficial in terms of economic and environmental consideration in the long run. The results revealed the feasibility of utilising EGA as a novel PCM carrier and the promising thermal performance of EGA-PCM cement mortar.

Suggested Citation

  • Yousefi, Ali & Tang, Waiching & Khavarian, Mehrnoush & Fang, Cheng, 2021. "Development of novel form-stable phase change material (PCM) composite using recycled expanded glass for thermal energy storage in cementitious composite," Renewable Energy, Elsevier, vol. 175(C), pages 14-28.
    • Handle: RePEc:eee:renene:v:175:y:2021:i:c:p:14-28
    DOI: 10.1016/j.renene.2021.04.123
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121006431
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.04.123?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lu, Zeyu & Zhang, Jinrui & Sun, Guoxing & Xu, Biwan & Li, Zongjin & Gong, Chenchen, 2015. "Effects of the form-stable expanded perlite/paraffin composite on cement manufactured by extrusion technique," Energy, Elsevier, vol. 82(C), pages 43-53.
    2. Regin, A. Felix & Solanki, S.C. & Saini, J.S., 2008. "Heat transfer characteristics of thermal energy storage system using PCM capsules: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(9), pages 2438-2458, December.
    3. Memon, Shazim Ali, 2014. "Phase change materials integrated in building walls: A state of the art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 870-906.
    4. Xu, Biwan & Li, Zongjin, 2013. "Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage," Applied Energy, Elsevier, vol. 105(C), pages 229-237.
    5. Li, Yali & Li, Jinhong & Deng, Yong & Guan, Weimin & Wang, Xiang & Qian, Tingting, 2016. "Preparation of paraffin/porous TiO2 foams with enhanced thermal conductivity as PCM, by covering the TiO2 surface with a carbon layer," Applied Energy, Elsevier, vol. 171(C), pages 37-45.
    6. Zhang, He & Xing, Feng & Cui, Hong-Zhi & Chen, Da-Zhu & Ouyang, Xing & Xu, Su-Zhen & Wang, Jia-Xin & Huang, Yi-Tian & Zuo, Jian-Dong & Tang, Jiao-Ning, 2016. "A novel phase-change cement composite for thermal energy storage: Fabrication, thermal and mechanical properties," Applied Energy, Elsevier, vol. 170(C), pages 130-139.
    7. Xu, Biwan & Ma, Hongyan & Lu, Zeyu & Li, Zongjin, 2015. "Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based composites," Applied Energy, Elsevier, vol. 160(C), pages 358-367.
    8. Memon, Shazim Ali & Cui, Hongzhi & Lo, Tommy Y. & Li, Qiusheng, 2015. "Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage," Applied Energy, Elsevier, vol. 150(C), pages 245-257.
    9. Xu, Biwan & Li, Zongjin, 2014. "Performance of novel thermal energy storage engineered cementitious composites incorporating a paraffin/diatomite composite phase change material," Applied Energy, Elsevier, vol. 121(C), pages 114-122.
    10. Ramakrishnan, Sayanthan & Sanjayan, Jay & Wang, Xiaoming & Alam, Morshed & Wilson, John, 2015. "A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites," Applied Energy, Elsevier, vol. 157(C), pages 85-94.
    11. Akeiber, Hussein & Nejat, Payam & Majid, Muhd Zaimi Abd. & Wahid, Mazlan A. & Jomehzadeh, Fatemeh & Zeynali Famileh, Iman & Calautit, John Kaiser & Hughes, Ben Richard & Zaki, Sheikh Ahmad, 2016. "A review on phase change material (PCM) for sustainable passive cooling in building envelopes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 1470-1497.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. B. Kalidasan & A. K. Pandey & Saidur Rahman & Aman Yadav & M. Samykano & V. V. Tyagi, 2022. "Graphene–Silver Hybrid Nanoparticle based Organic Phase Change Materials for Enhanced Thermal Energy Storage," Sustainability, MDPI, vol. 14(20), pages 1-16, October.
    2. Michał Musiał & Lech Lichołai & Dušan Katunský, 2023. "Modern Thermal Energy Storage Systems Dedicated to Autonomous Buildings," Energies, MDPI, vol. 16(11), pages 1-28, May.
    3. Yan, Tian & Zhou, Xuan & Xu, Xinhua & Yu, Jinghua & Li, Xianting, 2022. "Parametric analysis on performances of the pipe-encapsulated PCM (PenPCM) wall system coupled with gravity heat-pipe and nocturnal radiant cooler," Renewable Energy, Elsevier, vol. 196(C), pages 161-180.
    4. Mariia Sozoniuk & Jonghun Park & Natalia Lumby, 2022. "Investigating Residents’ Acceptance of Mobile Apps for Household Recycling: A Case Study of New Jersey," Sustainability, MDPI, vol. 14(17), pages 1-18, August.
    5. Wang, Ji-Xiang & Qian, Jian & Wang, Ni & Zhang, He & Cao, Xiang & Liu, Feifan & Hao, Guanqiu, 2023. "A scalable micro-encapsulated phase change material and liquid metal integrated composite for sustainable data center cooling," Renewable Energy, Elsevier, vol. 213(C), pages 75-85.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lv, Peizhao & Liu, Chenzhen & Rao, Zhonghao, 2017. "Review on clay mineral-based form-stable phase change materials: Preparation, characterization and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P1), pages 707-726.
    2. Ramakrishnan, Sayanthan & Wang, Xiaoming & Sanjayan, Jay & Wilson, John, 2017. "Thermal performance assessment of phase change material integrated cementitious composites in buildings: Experimental and numerical approach," Applied Energy, Elsevier, vol. 207(C), pages 654-664.
    3. Drissi, Sarra & Ling, Tung-Chai & Mo, Kim Hung & Eddhahak, Anissa, 2019. "A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 467-484.
    4. Lv, Peizhao & Liu, Chenzhen & Rao, Zhonghao, 2016. "Experiment study on the thermal properties of paraffin/kaolin thermal energy storage form-stable phase change materials," Applied Energy, Elsevier, vol. 182(C), pages 475-487.
    5. Nie, Binjian & Palacios, Anabel & Zou, Boyang & Liu, Jiaxu & Zhang, Tongtong & Li, Yunren, 2020. "Review on phase change materials for cold thermal energy storage applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    6. Ramakrishnan, Sayanthan & Sanjayan, Jay & Wang, Xiaoming & Alam, Morshed & Wilson, John, 2015. "A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites," Applied Energy, Elsevier, vol. 157(C), pages 85-94.
    7. Umair, Malik Muhammad & Zhang, Yuang & Iqbal, Kashif & Zhang, Shufen & Tang, Bingtao, 2019. "Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage–A review," Applied Energy, Elsevier, vol. 235(C), pages 846-873.
    8. Singh, Aditya Kumar & Rathore, Pushpendra Kumar Singh & Sharma, R.K. & Gupta, Naveen Kumar & Kumar, Rajan, 2023. "Experimental evaluation of composite concrete incorporated with thermal energy storage material for improved thermal behavior of buildings," Energy, Elsevier, vol. 263(PA).
    9. Monika Gandhi & Ashok Kumar & Rajasekar Elangovan & Chandan Swaroop Meena & Kishor S. Kulkarni & Anuj Kumar & Garima Bhanot & Nishant R. Kapoor, 2020. "A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings," Sustainability, MDPI, vol. 12(22), pages 1-17, November.
    10. Rostami, Sara & Afrand, Masoud & Shahsavar, Amin & Sheikholeslami, M. & Kalbasi, Rasool & Aghakhani, Saeed & Shadloo, Mostafa Safdari & Oztop, Hakan F., 2020. "A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage," Energy, Elsevier, vol. 211(C).
    11. Peng, Lihua & Chao, Luomeng & Xu, Ziqing & Yang, Haibin & Zheng, Dapeng & Wei, Boxuan & Sun, Changwei & Cui, Hongzhi, 2022. "High-efficiency energy-saving buildings utilizing potassium tungsten bronze heat-insulating glass and polyethylene glycol/expanded energy storage blanket," Energy, Elsevier, vol. 255(C).
    12. Xu, Biwan & Li, Zongjin, 2014. "Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites," Energy, Elsevier, vol. 72(C), pages 371-380.
    13. Qian, Tingting & Li, Jinhong, 2018. "Octadecane/C-decorated diatomite composite phase change material with enhanced thermal conductivity as aggregate for developing structural–functional integrated cement for thermal energy storage," Energy, Elsevier, vol. 142(C), pages 234-249.
    14. Lin, Yaxue & Zhu, Chuqiao & Alva, Guruprasad & Fang, Guiyin, 2018. "Palmitic acid/polyvinyl butyral/expanded graphite composites as form-stable phase change materials for solar thermal energy storage," Applied Energy, Elsevier, vol. 228(C), pages 1801-1809.
    15. Kahwaji, Samer & Johnson, Michel B. & Kheirabadi, Ali C. & Groulx, Dominic & White, Mary Anne, 2016. "Stable, low-cost phase change material for building applications: The eutectic mixture of decanoic acid and tetradecanoic acid," Applied Energy, Elsevier, vol. 168(C), pages 457-464.
    16. Ren, Miao & Liu, Yushi & Gao, Xiaojian, 2020. "Incorporation of phase change material and carbon nanofibers into lightweight aggregate concrete for thermal energy regulation in buildings," Energy, Elsevier, vol. 197(C).
    17. Mingli Li & Guoqing Gui & Zhibin Lin & Long Jiang & Hong Pan & Xingyu Wang, 2018. "Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings," Sustainability, MDPI, vol. 10(8), pages 1-23, July.
    18. Gu, Xiaobin & Liu, Peng & Bian, Liang & He, Huichao, 2019. "Enhanced thermal conductivity of palmitic acid/mullite phase change composite with graphite powder for thermal energy storage," Renewable Energy, Elsevier, vol. 138(C), pages 833-841.
    19. Wang, Chih Lin & Yeh, Kuan Lin & Chen, Chih Wei & Lee, Yun & Lee, Hung Lin & Lee, Tu, 2017. "A quick-fix design of phase change material by particle blending and spherical agglomeration," Applied Energy, Elsevier, vol. 191(C), pages 239-250.
    20. Mi, Xuming & Liu, Ran & Cui, Hongzhi & Memon, Shazim Ali & Xing, Feng & Lo, Yiu, 2016. "Energy and economic analysis of building integrated with PCM in different cities of China," Applied Energy, Elsevier, vol. 175(C), pages 324-336.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:175:y:2021:i:c:p:14-28. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.