IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v173y2021icp639-651.html
   My bibliography  Save this article

Experimental investigation of a novel thermal storage solar air heater (TSSAH) based on flat micro-heat pipe arrays

Author

Listed:
  • Wang, Tengyue
  • Zhao, Yaohua
  • Diao, Yanhua
  • Ma, Cheng
  • Zhang, Yubin
  • Lu, Xiaoshan

Abstract

A novel thermal storage solar air heater (TSSAH) is proposed in this study. This TSSAH is composed of a vacuum glass tube, flat micro-heat pipe arrays (FMHPA), and a thermal storage material (i.e., paraffin) with a phase change temperature of 58 °C. The FMHPA acts as the core heat transfer component. Considering the low heat conductivity coefficient of paraffin, louver fins are utilized to enhance heat transfer. Thermal performance is analyzed and discussed. During thermal collection, natural convection evidently contributes to enhancing heat transfer. Increasing solar radiation intensity can improve collection efficiency. Thermal collection efficiency increases from 70.22% to 77.28% when solar radiation is increased from 675 W/m2 to 835 W/m2 under an ambient temperature range of 20.8 °C–23.3 °C. A high ambient temperature results in high collection efficiency that can reach 80.59%. During thermal discharge, enhancing the air volumetric flow rate can evidently increase the amount of useful energy and shorten discharge time. From 80 m3/h to 170 m3/h, the amount of useful energy is increased from 335 W to 550 W, and discharge time is shortened from 309 min to 195 min under inlet temperatures ranging from 24.1 °C to 24.2 °C. A high inlet temperature generates a high outlet temperature but decreases the amount of useful energy. From 19.7 °C to 32.0 °C, outlet temperature is increased from 30.4 °C to 36.6 °C, and the amount of useful energy is reduced from 692 W to 287 W at an air volumetric flow rate of 200 m3/h. During thermal discharge, the average amount of useful energy can reach 692 W at an inlet temperature of 19.7 °C and an air volumetric flow rate of 200 m3/h, indicating that the proposed TSSAH can release heat quickly. In the experiment scale, the discharged heat is 6150–6450 kJ at a phase change material temperature scale of 85 °C–35 °C.

Suggested Citation

  • Wang, Tengyue & Zhao, Yaohua & Diao, Yanhua & Ma, Cheng & Zhang, Yubin & Lu, Xiaoshan, 2021. "Experimental investigation of a novel thermal storage solar air heater (TSSAH) based on flat micro-heat pipe arrays," Renewable Energy, Elsevier, vol. 173(C), pages 639-651.
    • Handle: RePEc:eee:renene:v:173:y:2021:i:c:p:639-651
    DOI: 10.1016/j.renene.2021.04.027
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121005395
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.04.027?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Enibe, S.O., 2003. "Thermal analysis of a natural circulation solar air heater with phase change material energy storage," Renewable Energy, Elsevier, vol. 28(14), pages 2269-2299.
    2. Arun, K.R. & Srinivas, M. & Saleel, C.A. & Jayaraj, S., 2020. "Influence of the location of discrete macro-encapsulated thermal energy storage on the performance of a double pass solar plate collector system," Renewable Energy, Elsevier, vol. 146(C), pages 675-686.
    3. El-Sebaii, A.A. & Aboul-Enein, S. & Ramadan, M.R.I. & Shalaby, S.M. & Moharram, B.M., 2011. "Thermal performance investigation of double pass-finned plate solar air heater," Applied Energy, Elsevier, vol. 88(5), pages 1727-1739, May.
    4. Lamnatou, Chr. & Papanicolaou, E. & Belessiotis, V. & Kyriakis, N., 2012. "Experimental investigation and thermodynamic performance analysis of a solar dryer using an evacuated-tube air collector," Applied Energy, Elsevier, vol. 94(C), pages 232-243.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Xianling & Yang, Jingxuan & Wen, Qiaowei & Shittu, Samson & Liu, Guangming & Qiu, Zining & Zhao, Xudong & Wang, Zhangyuan, 2022. "Visualization study of a flat confined loop heat pipe for electronic devices cooling," Applied Energy, Elsevier, vol. 322(C).
    2. Khanlari, Ataollah & Sözen, Adnan & Afshari, Faraz & Tuncer, Azim Doğuş, 2021. "Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system," Renewable Energy, Elsevier, vol. 175(C), pages 1151-1166.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Oztop, Hakan F. & Bayrak, Fatih & Hepbasli, Arif, 2013. "Energetic and exergetic aspects of solar air heating (solar collector) systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 59-83.
    2. Madhankumar, S. & Viswanathan, Karthickeyan & Wu, Wei, 2021. "Energy, exergy and environmental impact analysis on the novel indirect solar dryer with fins inserted phase change material," Renewable Energy, Elsevier, vol. 176(C), pages 280-294.
    3. Saxena, Abhishek & Varun, & El-Sebaii, A.A., 2015. "A thermodynamic review of solar air heaters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 863-890.
    4. Dhiman, Prashant & Thakur, N.S. & Chauhan, S.R., 2012. "Thermal and thermohydraulic performance of counter and parallel flow packed bed solar air heaters," Renewable Energy, Elsevier, vol. 46(C), pages 259-268.
    5. Fudholi, Ahmad & Sopian, Kamaruzzaman, 2019. "A review of solar air flat plate collector for drying application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 333-345.
    6. M. M. Hasan & Shakhawat Hossain & M. Mofijur & Zobaidul Kabir & Irfan Anjum Badruddin & T. M. Yunus Khan & Esam Jassim, 2023. "Harnessing Solar Power: A Review of Photovoltaic Innovations, Solar Thermal Systems, and the Dawn of Energy Storage Solutions," Energies, MDPI, vol. 16(18), pages 1-30, September.
    7. Giwa, Adewale & Alabi, Adetunji & Yusuf, Ahmed & Olukan, Tuza, 2017. "A comprehensive review on biomass and solar energy for sustainable energy generation in Nigeria," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 620-641.
    8. Vengadesan, Elumalai & Senthil, Ramalingam, 2020. "A review on recent developments in thermal performance enhancement methods of flat plate solar air collector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    9. Shafieian, Abdellah & Khiadani, Mehdi & Nosrati, Ataollah, 2018. "A review of latest developments, progress, and applications of heat pipe solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 95(C), pages 273-304.
    10. Mohammadi, K. & Sabzpooshani, M., 2013. "Comprehensive performance evaluation and parametric studies of single pass solar air heater with fins and baffles attached over the absorber plate," Energy, Elsevier, vol. 57(C), pages 741-750.
    11. Alam, Tabish & Kim, Man-Hoe, 2017. "Performance improvement of double-pass solar air heater – A state of art of review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 779-793.
    12. Kumar, Amit & Akshayveer, & Singh, Ajeet Pratap & Singh, O.P., 2022. "Investigations for efficient design of a new counter flow double-pass curved solar air heater," Renewable Energy, Elsevier, vol. 185(C), pages 759-770.
    13. Hassan, Hamdy & Abo-Elfadl, Saleh & El-Dosoky, M.F., 2020. "An experimental investigation of the performance of new design of solar air heater (tubular)," Renewable Energy, Elsevier, vol. 151(C), pages 1055-1066.
    14. Hu, Jianjun & Lan, Shuhan & Hu, Jingheng, 2024. "A self-driven solar air heater integrated with a thermal energy storage unit: Design and experiment study," Energy, Elsevier, vol. 287(C).
    15. Yang, Tingting & Athienitis, Andreas K., 2015. "Experimental investigation of a two-inlet air-based building integrated photovoltaic/thermal (BIPV/T) system," Applied Energy, Elsevier, vol. 159(C), pages 70-79.
    16. Wang, Tengyue & Diao, Yanhua & Zhao, Yaohua & Zhu, Tingting, 2022. "Experimental investigation of a novel split type vacuum tube solar air thermal collection-stepped storage system (ST-VTSATC-SSS)," Renewable Energy, Elsevier, vol. 192(C), pages 67-86.
    17. Agathokleous, R. & Barone, G. & Buonomano, A. & Forzano, C. & Kalogirou, S.A. & Palombo, A., 2019. "Building façade integrated solar thermal collectors for air heating: experimentation, modelling and applications," Applied Energy, Elsevier, vol. 239(C), pages 658-679.
    18. Abdulhamed, Ali Jaber & Adam, Nor Mariah & Ab-Kadir, Mohd Zainal Abidin & Hairuddin, Abdul Aziz, 2018. "Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 91(C), pages 822-831.
    19. Badescu, Viorel & Abed, Qahtan A. & Ciocanea, Adrian & Soriga, Iuliana, 2017. "The stability of the radiative regime does influence the daily performance of solar air heaters," Renewable Energy, Elsevier, vol. 107(C), pages 403-416.
    20. Kumar, Amit & Akshayveer, & Singh, Ajeet Pratap & Singh, O.P., 2020. "Efficient designs of double-pass curved solar air heaters," Renewable Energy, Elsevier, vol. 160(C), pages 1105-1118.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:173:y:2021:i:c:p:639-651. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.