IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v164y2021icp815-823.html
   My bibliography  Save this article

Performance comparison and economic analysis of three solar dryer designs for wood using a numerical simulation

Author

Listed:
  • Bekkioui, Naoual

Abstract

Three designs of a direct solar dryer for wood were evaluated with computer simulations. Calculations were performed using a heat and mass transfer model to obtain and compare the wood moisture content (MC) variation, as well as other drying parameters within the three designs. The findings showed higher drying temperatures and shorter drying times for solar dryers with large transparent cover areas (i.e., greenhouse-type dryers). Comparisons between glass covered and Plexiglas (PMMA) covered systems were also performed and the results indicated reasonably similar drying curves. The effect of using plastic cover was more prominent for dryers with low transparent areas (i.e., semi-greenhouse-type dryers), that is, 5% increase in the drying time for the greenhouse-type design and 10% increase for the semi-greenhouse-type designs. The economic analysis of the three designs revealed that double-glazing reduced the drying time, though it increased the cost of the covers by more than 130%. Inserting a Plexiglas cover over the glass cover resulted in a 25% decrease in the drying time and only a 57% increase in cost. Additionally, the combined plastic-glass configuration for the semi-greenhouse-type design resulted in a drying time comparable to this of the single glazing greenhouse-type design, though at a lower cost.

Suggested Citation

  • Bekkioui, Naoual, 2021. "Performance comparison and economic analysis of three solar dryer designs for wood using a numerical simulation," Renewable Energy, Elsevier, vol. 164(C), pages 815-823.
    • Handle: RePEc:eee:renene:v:164:y:2021:i:c:p:815-823
    DOI: 10.1016/j.renene.2020.09.126
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120315512
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.09.126?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Murthy, M.V. Ramana, 2009. "A review of new technologies, models and experimental investigations of solar driers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(4), pages 835-844, May.
    2. Khouya, A. & Draoui, A., 2019. "Computational drying model for solar kiln with latent heat energy storage: Case studies of thermal application," Renewable Energy, Elsevier, vol. 130(C), pages 796-813.
    3. Patil, Rajendra & Gawande, Rupesh, 2016. "A review on solar tunnel greenhouse drying system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 196-214.
    4. Luna, D. & Nadeau, J.-P. & Jannot, Y., 2010. "Model and simulation of a solar kiln with energy storage," Renewable Energy, Elsevier, vol. 35(11), pages 2533-2542.
    5. Pirasteh, G. & Saidur, R. & Rahman, S.M.A. & Rahim, N.A., 2014. "A review on development of solar drying applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 133-148.
    6. Bentayeb, F. & Bekkioui, N. & Zeghmati, B., 2008. "Modelling and simulation of a wood solar dryer in a Moroccan climate," Renewable Energy, Elsevier, vol. 33(3), pages 501-506.
    7. Bekkioui, Naoual & El hakiki, Sarra & Rachadi, Abdeljalil & Ez-Zahraouy, Hamid, 2020. "One-year simulation of a solar wood dryer with glazed walls in a Moroccan climate," Renewable Energy, Elsevier, vol. 155(C), pages 770-782.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lamrani, Bilal & Kuznik, Frédéric & Ajbar, Abdelhamid & Boumaza, Mourad, 2021. "Energy analysis and economic feasibility of wood dryers integrated with heat recovery unit and solar air heaters in cold and hot climates," Energy, Elsevier, vol. 228(C).
    2. Rashidi, Milad & Arabhosseini, Akbar & Samimi-Akhijahani, Hadi & Kermani, Ali M., 2021. "Acceleration the drying process of oleaster (Elaeagnus angustifolia L.) using reflectors and desiccant system in a solar drying system," Renewable Energy, Elsevier, vol. 171(C), pages 526-541.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bekkioui, Naoual & El hakiki, Sarra & Rachadi, Abdeljalil & Ez-Zahraouy, Hamid, 2020. "One-year simulation of a solar wood dryer with glazed walls in a Moroccan climate," Renewable Energy, Elsevier, vol. 155(C), pages 770-782.
    2. Lamrani, Bilal & Kuznik, Frédéric & Ajbar, Abdelhamid & Boumaza, Mourad, 2021. "Energy analysis and economic feasibility of wood dryers integrated with heat recovery unit and solar air heaters in cold and hot climates," Energy, Elsevier, vol. 228(C).
    3. Fudholi, Ahmad & Sopian, Kamaruzzaman, 2019. "A review of solar air flat plate collector for drying application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 333-345.
    4. El Hage, Hicham & Herez, Amal & Ramadan, Mohamad & Bazzi, Hassan & Khaled, Mahmoud, 2018. "An investigation on solar drying: A review with economic and environmental assessment," Energy, Elsevier, vol. 157(C), pages 815-829.
    5. Khouya, Ahmed, 2020. "Effect of regeneration heat and energy storage on thermal drying performance in a hardwood solar kiln," Renewable Energy, Elsevier, vol. 155(C), pages 783-799.
    6. Dake, Rock Aymar & N’Tsoukpoe, Kokouvi Edem & Kuznik, Frédéric & Lèye, Babacar & Ouédraogo, Igor W.K., 2021. "A review on the use of sorption materials in solar dryers," Renewable Energy, Elsevier, vol. 175(C), pages 965-979.
    7. Simo-Tagne, Merlin & Ndukwu, Macmanus Chinenye & Zoulalian, André & Bennamoun, Lyes & Kifani-Sahban, Fatima & Rogaume, Yann, 2020. "Numerical analysis and validation of a natural convection mix-mode solar dryer for drying red chilli under variable conditions," Renewable Energy, Elsevier, vol. 151(C), pages 659-673.
    8. Ugwu, S.N. & Ugwuishiwu, B.O. & Ekechukwu, O.V. & Njoku, H. & Ani, A.O., 2015. "Design, construction, and evaluation of a mixed mode solar kiln with black-painted pebble bed for timber seasoning in a tropical setting," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1404-1412.
    9. Lamidi, Rasaq. O. & Jiang, L. & Pathare, Pankaj B. & Wang, Y.D. & Roskilly, A.P., 2019. "Recent advances in sustainable drying of agricultural produce: A review," Applied Energy, Elsevier, vol. 233, pages 367-385.
    10. Mao, Guozhu & Zou, Hongyang & Chen, Guanyi & Du, Huibin & Zuo, Jian, 2015. "Past, current and future of biomass energy research: A bibliometric analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 1823-1833.
    11. Singh, Pushpendra & Shrivastava, Vipin & Kumar, Anil, 2018. "Recent developments in greenhouse solar drying: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3250-3262.
    12. Khouya, Ahmed, 2021. "Modelling and analysis of a hybrid solar dryer for woody biomass," Energy, Elsevier, vol. 216(C).
    13. Lamrani, Bilal & Elmrabet, Yasmine & Mathew, Ibeh & Bekkioui, Naoual & Etim, Promise & Chahboun, Adil & Draoui, Abdeslam & Ndukwu, Macmanus Chinenye, 2022. "Energy, economic analysis and mathematical modelling of mixed-mode solar drying of potato slices with thermal storage loaded V-groove collector: Application to Maghreb region," Renewable Energy, Elsevier, vol. 200(C), pages 48-58.
    14. Mohammadi, Kasra & Khorasanizadeh, Hossein, 2015. "A review of solar radiation on vertically mounted solar surfaces and proper azimuth angles in six Iranian major cities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 47(C), pages 504-518.
    15. Syed-Hassan, Syed Shatir A. & Wang, Yi & Hu, Song & Su, Sheng & Xiang, Jun, 2017. "Thermochemical processing of sewage sludge to energy and fuel: Fundamentals, challenges and considerations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 888-913.
    16. Moudakkar, Touria & El Hallaoui, Z. & Vaudreuil, S. & Bounahmidi, T., 2019. "Modeling and performance analysis of a PTC for industrial phosphate flash drying," Energy, Elsevier, vol. 166(C), pages 1134-1148.
    17. Saidur, R. & Hossain, M.S. & Islam, M.R. & Fayaz, H. & Mohammed, H.A., 2011. "A review on kiln system modeling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2487-2500, June.
    18. Theodora Karanisa & Yasmine Achour & Ahmed Ouammi & Sami Sayadi, 2022. "Smart greenhouses as the path towards precision agriculture in the food-energy and water nexus: case study of Qatar," Environment Systems and Decisions, Springer, vol. 42(4), pages 521-546, December.
    19. Shiva Gorjian & Behnam Hosseingholilou & Laxmikant D. Jathar & Haniyeh Samadi & Samiran Samanta & Atul A. Sagade & Karunesh Kant & Ravishankar Sathyamurthy, 2021. "Recent Advancements in Technical Design and Thermal Performance Enhancement of Solar Greenhouse Dryers," Sustainability, MDPI, vol. 13(13), pages 1-32, June.
    20. Achour, Yasmine & Ouammi, Ahmed & Zejli, Driss, 2021. "Technological progresses in modern sustainable greenhouses cultivation as the path towards precision agriculture," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:164:y:2021:i:c:p:815-823. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.