IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v132y2019icp1104-1111.html
   My bibliography  Save this article

Numerical simulation of heat transfer process of the raised floor heating system integrated with a burning cave

Author

Listed:
  • Zhang, Xueyan
  • Liu, Xin
  • Chen, Bin
  • Zhao, Joe R.
  • Sang, Yizhou

Abstract

In order to optimize structural design and balance heat distribution of the raised floor heating system heated by a burning cave, an unsteady heat transfer process of the raised floor was analyzed and discussed. An unsteady heat transfer model of the raised floor heating system was established to solve the problem of inner natural convection by air coupled with radiation and conduction heat transfer between two floor surfaces by computational fluid dynamics (CFD). Moreover, heating intensity, structural size and position of the heat source (burning cave) impact on the heat transfer performance and heating effect were discussed, which can provide a theoretical basis for parameter matching and structure optimizing. The results indicate that the best position of burning cave is under the center ground of a rural house, where the reasonable heat intensity of the burning cave is about 200 W/m2. The calculated temperatures and velocities are in reasonable agreement with measurements on the model house, which can provide a basic data support for the engineering practice of raised floor heating system.

Suggested Citation

  • Zhang, Xueyan & Liu, Xin & Chen, Bin & Zhao, Joe R. & Sang, Yizhou, 2019. "Numerical simulation of heat transfer process of the raised floor heating system integrated with a burning cave," Renewable Energy, Elsevier, vol. 132(C), pages 1104-1111.
    • Handle: RePEc:eee:renene:v:132:y:2019:i:c:p:1104-1111
    DOI: 10.1016/j.renene.2018.07.035
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148118308322
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2018.07.035?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kaska, Önder & Yumrutas, Recep & Arpa, Orhan, 2009. "Theoretical and experimental investigation of total equivalent temperature difference (TETD) values for building walls and flat roofs in Turkey," Applied Energy, Elsevier, vol. 86(5), pages 737-747, May.
    2. Zhou, Guobing & He, Jing, 2015. "Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes," Applied Energy, Elsevier, vol. 138(C), pages 648-660.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Fan, Yi & Zhao, Xudong & Li, Jing & Cheng, Yuanda & Badiei, Ali & Zhou, Jinzhi & Yu, Min & Li, Guiqiang & Du, Zhenyu & Ji, Jie & Zhu, Zishang & Ma, Xiaoli & Bai, Huifeng & Myers, Steve, 2020. "Operational performance of a novel fast-responsive heat storage/exchanging unit (HSEU) for solar heating systems," Renewable Energy, Elsevier, vol. 151(C), pages 137-151.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhou, D. & Zhao, C.Y. & Tian, Y., 2012. "Review on thermal energy storage with phase change materials (PCMs) in building applications," Applied Energy, Elsevier, vol. 92(C), pages 593-605.
    2. Ye, Hong & Long, Linshuang & Zhang, Haitao & Zou, Ruqiang, 2014. "The performance evaluation of shape-stabilized phase change materials in building applications using energy saving index," Applied Energy, Elsevier, vol. 113(C), pages 1118-1126.
    3. Adil Zainal, Omer & Yumrutaş, Recep, 2015. "Validation of periodic solution for computing CLTD (cooling load temperature difference) values for building walls and flat roofs," Energy, Elsevier, vol. 82(C), pages 758-768.
    4. Monika Gandhi & Ashok Kumar & Rajasekar Elangovan & Chandan Swaroop Meena & Kishor S. Kulkarni & Anuj Kumar & Garima Bhanot & Nishant R. Kapoor, 2020. "A Review on Shape-Stabilized Phase Change Materials for Latent Energy Storage in Buildings," Sustainability, MDPI, vol. 12(22), pages 1-17, November.
    5. Lu, Shilei & Gao, Jingxian & Tong, Haojie & Yin, Shuai & Tang, Xiaolei & Jiang, Xiangyang, 2020. "Model establishment and operation optimization of the casing PCM radiant floor heating system," Energy, Elsevier, vol. 193(C).
    6. De Masi, Rosa Francesca & Ruggiero, Silvia & Vanoli, Giuseppe Peter, 2020. "Multi-layered wall with vacuum insulation panels: Results of 5-years in-field monitoring and numerical analysis of aging effect on building consumptions," Applied Energy, Elsevier, vol. 278(C).
    7. Khaireldin Faraj & Mahmoud Khaled & Jalal Faraj & Farouk Hachem & Cathy Castelain, 2022. "A Summary Review on Experimental Studies for PCM Building Applications: Towards Advanced Modular Prototype," Energies, MDPI, vol. 15(4), pages 1-43, February.
    8. Luis Ricardo Bernardo & Henrik Davidsson & Erik Andersson, 2016. "Retrofitted Solar Domestic Hot Water Systems for Swedish Single-Family Houses—Evaluation of a Prototype and Life-Cycle Cost Analysis," Energies, MDPI, vol. 9(11), pages 1-15, November.
    9. Jia, Hongyuan & Pang, Xiufeng & Haves, Philip, 2018. "Experimentally-determined characteristics of radiant systems for office buildings," Applied Energy, Elsevier, vol. 221(C), pages 41-54.
    10. Edson Manyumbu & Viktoria Martin & Justin Ningwei Chiu, 2023. "Prospective PCM–Desiccant Combination with Solar-Assisted Regeneration for the Indoor Comfort Control of an Office in a Warm and Humid Climate—A Numerical Study," Energies, MDPI, vol. 16(14), pages 1-14, July.
    11. Xiaohang Wang & Wentong Chong & Kokhoe Wong & Saihin Lai & Liphuat Saw & Xianbo Xiang & Chin-Tsan Wang, 2019. "Preliminary Techno–Environment–Economic Evaluation of an Innovative Hybrid Renewable Energy Harvester System for Residential Application," Energies, MDPI, vol. 12(8), pages 1-28, April.
    12. Rongda Ye & Xiaoming Fang & Zhengguo Zhang, 2021. "Numerical Study on Energy-Saving Performance of a New Type of Phase Change Material Room," Energies, MDPI, vol. 14(13), pages 1-18, June.
    13. Mazzeo, D. & Oliveti, G. & Arcuri, N., 2016. "Influence of internal and external boundary conditions on the decrement factor and time lag heat flux of building walls in steady periodic regime," Applied Energy, Elsevier, vol. 164(C), pages 509-531.
    14. Luo, Yongqiang & Zhang, Ling & Liu, Zhongbing & Wang, Yingzi & Meng, Fangfang & Xie, Lei, 2016. "Modeling of the surface temperature field of a thermoelectric radiant ceiling panel system," Applied Energy, Elsevier, vol. 162(C), pages 675-686.
    15. Kamil Pochwat & Sabina Kordana-Obuch & Mariusz Starzec & Beata Piotrowska, 2020. "Financial Analysis of the Use of Two Horizontal Drain Water Heat Recovery Units," Energies, MDPI, vol. 13(16), pages 1-18, August.
    16. Wenqiang Sun & Zuquan Zhao & Yanhui Wang, 2017. "Thermal Analysis of a Thermal Energy Storage Unit to Enhance a Workshop Heating System Driven by Industrial Residual Water," Energies, MDPI, vol. 10(2), pages 1-19, February.
    17. Larwa, Barbara & Cesari, Silvia & Bottarelli, Michele, 2021. "Study on thermal performance of a PCM enhanced hydronic radiant floor heating system," Energy, Elsevier, vol. 225(C).
    18. Fathipour, Reza & Hadidi, Amin, 2017. "Analytical solution for the study of time lag and decrement factor for building walls in climate of Iran," Energy, Elsevier, vol. 134(C), pages 167-180.
    19. Víctor Echarri-Iribarren & Nyuk Hien Wong & Ana Sánchez-Ostiz, 2021. "Radiant Floors versus Radiant Walls Using Ceramic Thermal Panels in Mediterranean Dwellings: Annual Energy Demand and Cost-Effective Analysis," Sustainability, MDPI, vol. 13(2), pages 1-26, January.
    20. Atefeh Abbaspour & Hossein Yousefi & Alireza Aslani & Younes Noorollahi, 2022. "Economic and Environmental Analysis of Incorporating Geothermal District Heating System Combined with Radiant Floor Heating for Building Heat Supply in Sarein, Iran Using Building Information Modeling," Energies, MDPI, vol. 15(23), pages 1-24, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:132:y:2019:i:c:p:1104-1111. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.