IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v93y2008i11p1673-1681.html
   My bibliography  Save this article

Optimal design of multi-state weighted k-out-of-n systems based on component design

Author

Listed:
  • Li, Wei
  • Zuo, Ming J.

Abstract

This paper presents a study on design optimization of multi-state weighted k-out-of-n systems. The studied system reliability model is more general than the traditional k-out-of-n system model. The system and its components are capable of assuming a whole range of performance levels, varying from perfect functioning to complete failure. A utility value corresponding to each state is used to indicate the corresponding performance level. A widely studied reliability optimization problem is the “component selection problem†, which involves selection of components with known reliability and cost characteristics. Less adequately addressed has been the problem of determining system cost and utility based on the relationships between component reliability, cost and utility. This paper addresses this topic. All the optimization problems dealt with in this paper can be categorized as either minimizing the expected total system cost subject to system reliability requirements, or maximizing system reliability subject to total system cost limitation. The resulting optimization problems are too complicated to be solved by traditional optimization approaches; therefore, genetic algorithm (GA) is used to solve them. Our results show that GA is a powerful tool for solving these kinds of problems.

Suggested Citation

  • Li, Wei & Zuo, Ming J., 2008. "Optimal design of multi-state weighted k-out-of-n systems based on component design," Reliability Engineering and System Safety, Elsevier, vol. 93(11), pages 1673-1681.
    • Handle: RePEc:eee:reensy:v:93:y:2008:i:11:p:1673-1681
    DOI: 10.1016/j.ress.2008.01.009
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832008000379
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2008.01.009?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Wei & Zuo, Ming J., 2008. "Reliability evaluation of multi-state weighted k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 93(1), pages 160-167.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sheng, Yuhong & Ke, Hua, 2020. "Reliability evaluation of uncertain k-out-of-n systems with multiple states," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    2. Eryilmaz, Serkan, 2018. "Reliability analysis of multi-state system with three-state components and its application to wind energy," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 58-63.
    3. Hu, Yishuang & Lin, Yu & Ding, Yi & Chen, Xingying & Zeng, Zhiguo, 2021. "Screening of optimal structure among large-scale multi-state weighted k-out-of-n systems considering reliability evaluation," Reliability Engineering and System Safety, Elsevier, vol. 206(C).
    4. Li, Y.F. & Peng, R., 2014. "Availability modeling and optimization of dynamic multi-state series–parallel systems with random reconfiguration," Reliability Engineering and System Safety, Elsevier, vol. 127(C), pages 47-57.
    5. Eryilmaz, Serkan, 2015. "Capacity loss and residual capacity in weighted k-out-of-n:G systems," Reliability Engineering and System Safety, Elsevier, vol. 136(C), pages 140-144.
    6. Faghih-Roohi, Shahrzad & Xie, Min & Ng, Kien Ming & Yam, Richard C.M., 2014. "Dynamic availability assessment and optimal component design of multi-state weighted k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 123(C), pages 57-62.
    7. Zhong, Chongquan & Jin, Haibo, 2014. "A novel optimal preventive maintenance policy for a cold standby system based on semi-Markov theory," European Journal of Operational Research, Elsevier, vol. 232(2), pages 405-411.
    8. Eryilmaz, Serkan, 2013. "On reliability analysis of a k-out-of-n system with components having random weights," Reliability Engineering and System Safety, Elsevier, vol. 109(C), pages 41-44.
    9. Eryilmaz, Serkan & Kan, Cihangir, 2020. "Reliability based modeling and analysis for a wind power system integrated by two wind farms considering wind speed dependence," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    10. Bjarnason, Erik T.S. & Taghipour, Sharareh & Banjevic, Dragan, 2014. "Joint optimal inspection and inventory for a k-out-of-n system," Reliability Engineering and System Safety, Elsevier, vol. 131(C), pages 203-215.
    11. Eryilmaz, Serkan, 2013. "Mean instantaneous performance of a system with weighted components that have arbitrarily distributed lifetimes," Reliability Engineering and System Safety, Elsevier, vol. 119(C), pages 290-293.
    12. Chen, Zhiwei & Hong, Dongpao & Cui, Weiwei & Xue, Weikang & Wang, Yao & Zhong, Jilong, 2023. "Resilience evaluation and optimal design for weapon system of systems with dynamic reconfiguration," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    13. Eryilmaz, Serkan & Rıza Bozbulut, Ali, 2014. "An algorithmic approach for the dynamic reliability analysis of non-repairable multi-state weighted k-out-of-n:G system," Reliability Engineering and System Safety, Elsevier, vol. 131(C), pages 61-65.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    2. Chen, Yiming & Liu, Yu & Jiang, Tao, 2021. "Optimal maintenance strategy for multi-state systems with single maintenance capacity and arbitrarily distributed maintenance time," Reliability Engineering and System Safety, Elsevier, vol. 211(C).
    3. Li, Yan-Fu & Zio, Enrico, 2012. "A multi-state model for the reliability assessment of a distributed generation system via universal generating function," Reliability Engineering and System Safety, Elsevier, vol. 106(C), pages 28-36.
    4. Zhang, Yiying, 2021. "Reliability Analysis of Randomly Weighted k-out-of-n Systems with Heterogeneous Components," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    5. Pourkarim Guilani, Pedram & Sharifi, Mani & Niaki, S.T.A. & Zaretalab, Arash, 2014. "Reliability evaluation of non-reparable three-state systems using Markov model and its comparison with the UGF and the recursive methods," Reliability Engineering and System Safety, Elsevier, vol. 129(C), pages 29-35.
    6. Jorgen Vitting Andersen & Roy Cerqueti & Jessica Riccioni, 2021. "Rational expectations as a tool for predicting failure of weighted k-out-of-n reliability systems," Papers 2112.10672, arXiv.org.
    7. Wang, Yong & Li, Lin & Huang, Shuhong & Chang, Qing, 2012. "Reliability and covariance estimation of weighted k-out-of-n multi-state systems," European Journal of Operational Research, Elsevier, vol. 221(1), pages 138-147.
    8. Serkan Eryilmaz & Kadir Sarikaya, 2014. "Modeling and analysis of weighted-k-out-of-n: G system consisting of two different types of components," Journal of Risk and Reliability, , vol. 228(3), pages 265-271, June.
    9. Xiahou, Tangfan & Zheng, Yi-Xuan & Liu, Yu & Chen, Hong, 2023. "Reliability modeling of modular k-out-of-n systems with functional dependency: A case study of radar transmitter systems," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    10. Eryilmaz, Serkan & Ucum, Kaan Ayberk, 2021. "The lost capacity by the weighted k-out-of-n system upon system failure," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    11. Xiaogang Song & Zhengjun Zhai & Yangming Guo & Peican Zhu & Jie Han, 2017. "Approximate Analysis of Multi-State Weighted k -Out-of- n Systems Applied to Transmission Lines," Energies, MDPI, vol. 10(11), pages 1-16, October.
    12. S. Ashrafi & M. Asadi, 2015. "On the stochastic and dependence properties of the three-state systems," Metrika: International Journal for Theoretical and Applied Statistics, Springer, vol. 78(3), pages 261-281, April.
    13. Serkan Eryilmaz & Ali Riza Bozbulut, 2019. "Reliability analysis of weighted- k -out-of- n system consisting of three-state components," Journal of Risk and Reliability, , vol. 233(6), pages 972-977, December.
    14. Jiang, Tao & Liu, Yu, 2017. "Parameter inference for non-repairable multi-state system reliability models by multi-level observation sequences," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 3-15.
    15. Eryilmaz, Serkan, 2018. "Reliability analysis of multi-state system with three-state components and its application to wind energy," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 58-63.
    16. Petchrompo, Sanyapong & Parlikad, Ajith Kumar, 2019. "A review of asset management literature on multi-asset systems," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 181-201.
    17. Mo, Yuchang & Xing, Liudong & Amari, Suprasad V. & Bechta Dugan, Joanne, 2015. "Efficient analysis of multi-state k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 95-105.
    18. Wang, Xiaoyue & Zhao, Xian & Wu, Congshan & Wang, Siqi, 2022. "Mixed shock model for multi-state weighted k-out-of-n: F systems with degraded resistance against shocks," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    19. Li, Yan-Fu & Zhang, Hanxiao, 2022. "The methods for exactly solving redundancy allocation optimization for multi-state series–parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    20. Zhang, Yiying, 2018. "Optimal allocation of active redundancies in weighted k-out-of-n systems," Statistics & Probability Letters, Elsevier, vol. 135(C), pages 110-117.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:93:y:2008:i:11:p:1673-1681. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.