IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v240y2023ics0951832023004465.html

Simulation model for the study of maintenance actions in a homogeneous multi-unit system of interchangeable components, with cannibalization

Author

Listed:
  • Diaz, Ermilso
  • Muñoz-Añasco, Mariela
  • Salvador, Antonio Correcher
  • García, Emilio

Abstract

Multi-unit systems pose logistical challenges in maintenance management, as finding a balance between availability and profitability is necessary. Choosing an appropriate maintenance policy can improve the use of available resources. The inclusion of cannibalization policies can offer greater responsiveness to spare part shortages. However, studying the effects of applying these policies in an existing system is only sometimes feasible. In this sense, simulation is presented as a valuable tool to investigate and understand these effects in a way that would not be possible. This article presents a simulation model to analyze different maintenance policies, including cannibalization, applied to a homogeneous multi-unit system of interchangeable components. The results show that even when problems arise in the supply chain of critical spare parts for the units, it is possible to maintain an acceptable availability rate through the implementation of cannibalization policies, which leads to an improvement in the operational availability of the units. Finally, the simulation tool also revealed advantages in describing transients of response to maintenance activities, which provides a complete understanding of how the system behaves in different situations.

Suggested Citation

  • Diaz, Ermilso & Muñoz-Añasco, Mariela & Salvador, Antonio Correcher & García, Emilio, 2023. "Simulation model for the study of maintenance actions in a homogeneous multi-unit system of interchangeable components, with cannibalization," Reliability Engineering and System Safety, Elsevier, vol. 240(C).
    • Handle: RePEc:eee:reensy:v:240:y:2023:i:c:s0951832023004465
    DOI: 10.1016/j.ress.2023.109532
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832023004465
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2023.109532?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Wakiru, James & Pintelon, Liliane & Muchiri, Peter N. & Chemweno, Peter K., 2021. "Integrated remanufacturing, maintenance and spares policies towards life extension of a multi-component system," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    2. Wang, Jun & Zhu, Xiaoyan, 2021. "Joint optimization of condition-based maintenance and inventory control for a k-out-of-n:F system of multi-state degrading components," European Journal of Operational Research, Elsevier, vol. 290(2), pages 514-529.
    3. Yan, Tao & Lei, Yaguo & Wang, Biao & Han, Tianyu & Si, Xiaosheng & Li, Naipeng, 2020. "Joint maintenance and spare parts inventory optimization for multi-unit systems considering imperfect maintenance actions," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    4. Petchrompo, Sanyapong & Parlikad, Ajith Kumar, 2019. "A review of asset management literature on multi-asset systems," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 181-201.
    5. Levitin, Gregory & Finkelstein, Maxim & Dai, Yuanshun, 2021. "Optimization of cyclic preventive replacement in homogeneous warm-standby system with reusable elements exposed to shocks," Reliability Engineering and System Safety, Elsevier, vol. 207(C).
    6. Jiang, Tao & Liu, Yu, 2020. "Selective maintenance strategy for systems executing multiple consecutive missions with uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    7. Zhang, Xiaohong & Liao, Haitao & Zeng, Jianchao & Shi, Guannan & Zhao, Bing, 2021. "Optimal Condition-based Opportunistic Maintenance and Spare Parts Provisioning for a Two-unit System using a State Space Partitioning Approach," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    8. Zhang, Chengjie & Qi, Faqun & Zhang, Ning & Li, Yong & Huang, Hongzhong, 2022. "Maintenance policy optimization for multi-component systems considering dynamic importance of components," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    9. Chen, Yuan & Qiu, Qingan & Zhao, Xian, 2022. "Condition-based opportunistic maintenance policies with two-phase inspections for continuous-state systems," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    10. Levitin, Gregory & Finkelstein, Maxim & Dai, Yuanshun, 2020. "Optimal preventive replacement policy for homogeneous cold standby systems with reusable elements," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    11. Zheng, Meimei & Ye, Hongqing & Wang, Dong & Pan, Ershun, 2021. "Joint Optimization of Condition-Based Maintenance and Spare Parts Orders for Multi-Unit Systems with Dual Sourcing," Reliability Engineering and System Safety, Elsevier, vol. 210(C).
    12. Alrabghi, Abdullah & Tiwari, Ashutosh, 2016. "A novel approach for modelling complex maintenance systems using discrete event simulation," Reliability Engineering and System Safety, Elsevier, vol. 154(C), pages 160-170.
    13. de Pater, Ingeborg & Reijns, Arthur & Mitici, Mihaela, 2022. "Alarm-based predictive maintenance scheduling for aircraft engines with imperfect Remaining Useful Life prognostics," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    14. de Pater, Ingeborg & Mitici, Mihaela, 2021. "Predictive maintenance for multi-component systems of repairables with Remaining-Useful-Life prognostics and a limited stock of spare components," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    15. Sheng, Jingyu & Prescott, Darren, 2019. "Using a novel hierarchical coloured Petri net to model and optimise fleet spare inventory, cannibalisation and preventive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gan, Shuyuan & Zhang, Xu & Coit, David W. & Wang, Xiaoyue, 2026. "Optimization of maintenance and spares inventory with dependence between the system and environment," Reliability Engineering and System Safety, Elsevier, vol. 265(PA).
    2. Zhang, Xiaohong & Zhang, Yongfei & Shi, Guannan & Gan, Jie & Liu, Jinpeng & Dai, Anshu, 2026. "Joint optimization of maintenance and resource preparation of system with multi-indicator degradation based on multiple failure mode division," Reliability Engineering and System Safety, Elsevier, vol. 266(PB).
    3. Zhu, Yunxin & Zheng, Meimei & Su, Zhiyun & Xia, Tangbin & Lin, Jie & Pan, Ershun, 2025. "Deep reinforcement learning for joint optimization of maintenance and spare parts ordering considering spare parts supply uncertainty," Reliability Engineering and System Safety, Elsevier, vol. 264(PB).
    4. Wang, Yukun & Gao, Weizheng & Li, Xiaopeng & Liu, Yiliu, 2024. "Joint optimization of performance-based contracting, condition-based maintenance and spare parts inventory for degrading production systems," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    5. Li, Xinlong & Jiang, Shuai & Chen, Baojia & Chen, Fafa & An, Youjun & Ran, Yan & Zhang, Genbao, 2025. "Joint optimization of imperfect preventive opportunistic maintenance and spare parts inventory for multi-unit systems considering spare parts reuse," Reliability Engineering and System Safety, Elsevier, vol. 261(C).
    6. Zhao, Sangqi & Wei, Yian & Cheng, Yao & Li, Yang, 2025. "A state-specific joint size, maintenance, and inventory policy for a k-out-of-n load-sharing system subject to self-announcing failures," Reliability Engineering and System Safety, Elsevier, vol. 257(PB).
    7. Qi, Faqun & Huang, Meiqi, 2024. "Joint optimization of maintenance and spares inventory policy for a series-parallel system considering dependent failure processes," Reliability Engineering and System Safety, Elsevier, vol. 247(C).
    8. Zhu, Mixin & Zhou, Xiaojun, 2023. "Hybrid opportunistic maintenance policy for serial-parallel multi-station manufacturing systems with spare part overlap," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    9. Santos, Augusto César de Jesus & Cavalcante, Cristiano Alexandre Virgínio & Wu, Shaomin, 2023. "Maintenance policies and models: A bibliometric and literature review of strategies for reuse and remanufacturing," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    10. Shuyuan Gan & Xinzhou Zhang & Lan Chen, 2022. "Maintenance optimization of a production system considering defect prevention and spare parts ordering," Journal of Risk and Reliability, , vol. 236(5), pages 893-906, October.
    11. Yang, Li & Zhou, Shihan & Ma, Xiaobing & Chen, Yi & Jia, Heping & Dai, Wei, 2024. "Group machinery intelligent maintenance: Adaptive health prediction and global dynamic maintenance decision-making," Reliability Engineering and System Safety, Elsevier, vol. 252(C).
    12. Crespo del Castillo, Adolfo & Parlikad, Ajith Kumar, 2024. "Dynamic fleet management: Integrating predictive and preventive maintenance with operation workload balance to minimise cost," Reliability Engineering and System Safety, Elsevier, vol. 249(C).
    13. Xia, Tangbin & Cao, Lei & Xu, Yuhui & Zhang, Kaigan & Chen, Zhen & Pan, Ershun & Xi, Lifeng, 2024. "Multi-level maintenance and inventory joint optimization for a k-out-of-n hyper-system considering the selection of suppliers with incentive discount policies," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    14. Mizutani, Daijiro & Nakazato, Yuto & Ikushima, Rie & Satsukawa, Koki & Kawasaki, Yosuke & Kuwahara, Masao, 2024. "Optimal intervention policy of emergency storage batteries for expressway transportation systems considering deterioration risk during lead time of replacement," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    15. Ding, Yutong & Xia, Tangbin & Wang, Yu & Zhang, Kaigan & Li, Yaping & Chen, Zhen & Xi, Lifeng, 2025. "A multi-stage stochastic programming for joint condition-based replacement and spare parts ordering towards complex manufacturing system with uncertain lead times," Reliability Engineering and System Safety, Elsevier, vol. 264(PB).
    16. Zhang, Wenyu & Gan, Jie & He, Shuguang & Li, Ting & He, Zhen, 2024. "An integrated framework of preventive maintenance and task scheduling for repairable multi-unit systems," Reliability Engineering and System Safety, Elsevier, vol. 247(C).
    17. Zheng, Meimei & Su, Zhiyun & Wang, Dong & Pan, Ershun, 2024. "Joint maintenance and spare part ordering from multiple suppliers for multicomponent systems using a deep reinforcement learning algorithm," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    18. Li, Meiyan & Wu, Bei, 2024. "Optimal condition-based opportunistic maintenance policy for two-component systems considering common cause failure," Reliability Engineering and System Safety, Elsevier, vol. 250(C).
    19. Zhou, Kai-Li & Cheng, De-Jun & Zhang, Han-Bing & Hu, Zhong-tai & Zhang, Chun-Yan, 2023. "Deep learning-based intelligent multilevel predictive maintenance framework considering comprehensive cost," Reliability Engineering and System Safety, Elsevier, vol. 237(C).
    20. Zhang, Wenyu & He, Shuguang & Zhang, Xiaohong & Zhao, Xing, 2024. "Joint optimization of job scheduling, condition-based maintenance planning, and spare parts ordering for degrading production systems," Reliability Engineering and System Safety, Elsevier, vol. 252(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:240:y:2023:i:c:s0951832023004465. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.