IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v104y2015ipap38-48.html
   My bibliography  Save this article

Environmental assessment of recycled mineral wool and polypropylene utilized in wood polymer composites

Author

Listed:
  • Väntsi, Olli
  • Kärki, Timo

Abstract

Environmental performance is an important promotive factor in the future use of wood polymer composites. In this study, the environmental effects of replacing virgin glass fibers with recycled mineral wool fibers, as well as replacing virgin polypropylene with recycled polypropylene are investigated. Furthermore, the environmental performance of two different end-of-life options for composite waste, incineration for energy use and landfill deposition is evaluated. The recycled mineral wool was found to have better environmental performance compared to glass fiber in every impact category assessed. The utilization of recycled polypropylene proved to be advantageous in global warming potential and abiotic depletion categories. It was found that the end-of-life management of composite waste has an important role in the environmental performance of composites. Incineration of composite waste for energy use had better performance compared to landfill deposition in all the categories assessed, except for global warming potential. It is concluded that while the environmentally optimal recycling method for polypropylene waste must be evaluated case by case, recycled mineral wool seems to provide an environmentally superior option to glass fiber in wood polymer composite applications where properties obtainable by the use of a mineral filler are required.

Suggested Citation

  • Väntsi, Olli & Kärki, Timo, 2015. "Environmental assessment of recycled mineral wool and polypropylene utilized in wood polymer composites," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 38-48.
    • Handle: RePEc:eee:recore:v:104:y:2015:i:pa:p:38-48
    DOI: 10.1016/j.resconrec.2015.09.009
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344915300872
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resconrec.2015.09.009?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Joshi, Omkar & Grebner, Donald L. & Khanal, Puskar N., 2015. "Status of urban wood-waste and their potential use for sustainable bioenergy in Mississippi," Resources, Conservation & Recycling, Elsevier, vol. 102(C), pages 20-26.
    2. Diyamandoglu, Vasil & Fortuna, Lorena M., 2015. "Deconstruction of wood-framed houses: Material recovery and environmental impact," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 21-30.
    3. Rajendran, Saravanan & Scelsi, Lino & Hodzic, Alma & Soutis, Constantinos & Al-Maadeed, Mariam A., 2012. "Environmental impact assessment of composites containing recycled plastics," Resources, Conservation & Recycling, Elsevier, vol. 60(C), pages 131-139.
    4. Luz, Sandra M. & Caldeira-Pires, Armando & Ferrão, Paulo M.C., 2010. "Environmental benefits of substituting talc by sugarcane bagasse fibers as reinforcement in polypropylene composites: Ecodesign and LCA as strategy for automotive components," Resources, Conservation & Recycling, Elsevier, vol. 54(12), pages 1135-1144.
    5. Pegoretti, Thaís dos Santos & Mathieux, Fabrice & Evrard, Damien & Brissaud, Daniel & Arruda, José Roberto de França, 2014. "Use of recycled natural fibres in industrial products: A comparative LCA case study on acoustic components in the Brazilian automotive sector," Resources, Conservation & Recycling, Elsevier, vol. 84(C), pages 1-14.
    6. Vera, Luis & Sun, Wei & Iftikhar, Maria & Liu, Junteng, 2015. "LCA based comparative study of a microbial oil production starch wastewater treatment plant and its improvements with the combination of CHP system in Shandong, China," Resources, Conservation & Recycling, Elsevier, vol. 96(C), pages 1-10.
    7. Höglmeier, Karin & Weber-Blaschke, Gabriele & Richter, Klaus, 2013. "Potentials for cascading of recovered wood from building deconstruction—A case study for south-east Germany," Resources, Conservation & Recycling, Elsevier, vol. 78(C), pages 81-91.
    8. Lazarevic, David & Aoustin, Emmanuelle & Buclet, Nicolas & Brandt, Nils, 2010. "Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective," Resources, Conservation & Recycling, Elsevier, vol. 55(2), pages 246-259.
    9. Alberta Carpenter & Jenna R. Jambeck & Kevin Gardner & Keith Weitz, 2013. "Life Cycle Assessment of End‐of‐Life Management Options for Construction and Demolition Debris," Journal of Industrial Ecology, Yale University, vol. 17(3), pages 396-406, June.
    10. David Lazarevic & Emmanuelle Aoustin & Nicolas Buclet & Nils Brandt, 2010. "Plastic Waste Management in the context of a European recycling society," Post-Print halshs-00584531, HAL.
    11. Vossberg, Cherilyn & Mason-Jones, Kyle & Cohen, Brett, 2014. "An energetic life cycle assessment of C&D waste and container glass recycling in Cape Town, South Africa," Resources, Conservation & Recycling, Elsevier, vol. 88(C), pages 39-49.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Toniolo, Sara & Mazzi, Anna & Pieretto, Chiara & Scipioni, Antonio, 2017. "Allocation strategies in comparative life cycle assessment for recycling: Considerations from case studies," Resources, Conservation & Recycling, Elsevier, vol. 117(PB), pages 249-261.
    2. Mayanti, Bening & Helo, Petri, 2022. "Closed-loop supply chain potential of agricultural plastic waste: Economic and environmental assessment of bale wrap waste recycling in Finland," International Journal of Production Economics, Elsevier, vol. 244(C).
    3. Rigamonti, L. & Grosso, M. & Møller, J. & Martinez Sanchez, V. & Magnani, S. & Christensen, T.H., 2014. "Environmental evaluation of plastic waste management scenarios," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 42-53.
    4. Turner, David A. & Williams, Ian D. & Kemp, Simon, 2015. "Greenhouse gas emission factors for recycling of source-segregated waste materials," Resources, Conservation & Recycling, Elsevier, vol. 105(PA), pages 186-197.
    5. Rebekka Volk & Christoph Stallkamp & Justus J. Steins & Savina Padumane Yogish & Richard C. Müller & Dieter Stapf & Frank Schultmann, 2021. "Techno‐economic assessment and comparison of different plastic recycling pathways: A German case study," Journal of Industrial Ecology, Yale University, vol. 25(5), pages 1318-1337, October.
    6. Huysman, Sofie & Debaveye, Sam & Schaubroeck, Thomas & Meester, Steven De & Ardente, Fulvio & Mathieux, Fabrice & Dewulf, Jo, 2015. "The recyclability benefit rate of closed-loop and open-loop systems: A case study on plastic recycling in Flanders," Resources, Conservation & Recycling, Elsevier, vol. 101(C), pages 53-60.
    7. Beigbeder, Joana & Perrin, Didier & Mascaro, Jean-François & Lopez-Cuesta, José-Marie, 2013. "Study of the physico-chemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices," Resources, Conservation & Recycling, Elsevier, vol. 78(C), pages 105-114.
    8. Jinsong Li & Kenji Takeuchi, 2023. "Import ban and clean air: estimating the effect of China’s waste import ban on ozone pollution," Environmental Economics and Policy Studies, Springer;Society for Environmental Economics and Policy Studies - SEEPS, vol. 25(4), pages 471-492, October.
    9. Simic, Vladimir & Dimitrijevic, Branka, 2013. "Risk explicit interval linear programming model for long-term planning of vehicle recycling in the EU legislative context under uncertainty," Resources, Conservation & Recycling, Elsevier, vol. 73(C), pages 197-210.
    10. Kerstens, S.M. & Priyanka, A. & van Dijk, K.C. & De Ruijter, F.J. & Leusbrock, I. & Zeeman, G., 2016. "Potential demand for recoverable resources from Indonesian wastewater and solid waste," Resources, Conservation & Recycling, Elsevier, vol. 110(C), pages 16-29.
    11. Ferrão, Paulo & Ribeiro, Paulo & Rodrigues, João & Marques, Alexandra & Preto, Miguel & Amaral, Miguel & Domingos, Tiago & Lopes, Ana & Costa, e Inês, 2014. "Environmental, economic and social costs and benefits of a packaging waste management system: A Portuguese case study," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 67-78.
    12. Jianguo Chen & Yangyue Su & Hongyun Si & Jindao Chen, 2018. "Managerial Areas of Construction and Demolition Waste: A Scientometric Review," IJERPH, MDPI, vol. 15(11), pages 1-20, October.
    13. Lausselet, Carine & Cherubini, Francesco & Oreggioni, Gabriel David & del Alamo Serrano, Gonzalo & Becidan, Michael & Hu, Xiangping & Rørstad, Per Kr. & Strømman, Anders Hammer, 2017. "Norwegian Waste-to-Energy: Climate change, circular economy and carbon capture and storage," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 50-61.
    14. Toniolo, Sara & Mazzi, Anna & Garato, Valentina Giulia & Aguiari, Filippo & Scipioni, Antonio, 2014. "Assessing the “design paradox” with life cycle assessment: A case study of a municipal solid waste incineration plant," Resources, Conservation & Recycling, Elsevier, vol. 91(C), pages 109-116.
    15. Markus Gall & Andrea Schweighuber & Wolfgang Buchberger & Reinhold W. Lang, 2020. "Plastic Bottle Cap Recycling—Characterization of Recyclate Composition and Opportunities for Design for Circularity," Sustainability, MDPI, vol. 12(24), pages 1-21, December.
    16. Miguel Vigil & Maria Pedrosa-Laza & JV Alvarez Cabal & Francisco Ortega-Fernández, 2020. "Sustainability Analysis of Active Packaging for the Fresh Cut Vegetable Industry by Means of Attributional & Consequential Life Cycle Assessment," Sustainability, MDPI, vol. 12(17), pages 1-18, September.
    17. Benedetta Cotta, 0. "What goes around, comes around? Access and allocation problems in Global North–South waste trade," International Environmental Agreements: Politics, Law and Economics, Springer, vol. 0, pages 1-15.
    18. Riaz Ahmad & Gengyuan Liu & Remo Santagata & Marco Casazza & Jingyan Xue & Kifayatullah Khan & Javed Nawab & Sergio Ulgiati & Massimiliano Lega, 2019. "LCA of Hospital Solid Waste Treatment Alternatives in a Developing Country: The Case of District Swat, Pakistan," Sustainability, MDPI, vol. 11(13), pages 1-20, June.
    19. Helén Williams & Fredrik Wikström & Katarina Wetter-Edman & Per Kristensson, 2018. "Decisions on Recycling or Waste: How Packaging Functions Affect the Fate of Used Packaging in Selected Swedish Households," Sustainability, MDPI, vol. 10(12), pages 1-19, December.
    20. Esa, Mohd Reza & Halog, Anthony & Rigamonti, Lucia, 2017. "Strategies for minimizing construction and demolition wastes in Malaysia," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 219-229.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:104:y:2015:i:pa:p:38-48. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.