IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v246y2022ics0925527321003807.html
   My bibliography  Save this article

Instilling lifecycle costs into modular product development for improved remanufacturing-product service system enterprise

Author

Listed:
  • Fadeyi, Johnson Adebayo
  • Monplaisir, Leslie

Abstract

The main challenges to remanufacturing could be remediated by product service system (PSS). Consequently, there have been growing interests to improve PSS-remanufacturing enterprise. Meanwhile, PSS and remanufacturing are substantially influenced by the decisions during product development (PD). Modular product design is acknowledged to enhance PSS and remanufacturing processes. However, lifecycle cost at the PD phase is missing in the PSS-remanufacturing integrated framework. This is a significant limitation since PD decisions account for over 70% of product lifecycle costs. Extending prior study, this research addresses this gap using a modular subassembly as a case study. The design, manufacturing, and transportation costs of the module variants that are available for the subassembly were obtained. The costs data obtained, alongside core cleaning and serviceability metrics that were determined in an earlier study are utilized in the optimization model developed. The model is implemented to identify optimal modular product configurations at the PD phase to enhance PSS-remanufacturing product offerings. Also, the study performs multi-objective analyses to evaluate the optimal product configurations considering core cleaning, serviceability, design, manufacturing, and transportation costs. The comparative strength and weaknesses of the product configurations are identified through the analyses. Also, sensitivity analyses are performed to assess the product configurations by adjusting the weights assigned to the objectives. The results of the analyses highlight the relative benefits and shortcomings of the product configurations. The approach developed provides a guide to determine the product configurations that facilitate PSS-remanufacturing integrated product offerings.

Suggested Citation

  • Fadeyi, Johnson Adebayo & Monplaisir, Leslie, 2022. "Instilling lifecycle costs into modular product development for improved remanufacturing-product service system enterprise," International Journal of Production Economics, Elsevier, vol. 246(C).
    • Handle: RePEc:eee:proeco:v:246:y:2022:i:c:s0925527321003807
    DOI: 10.1016/j.ijpe.2021.108404
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527321003807
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2021.108404?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chen, Jen-Ming & Chang, Chia-I, 2013. "Dynamic pricing for new and remanufactured products in a closed-loop supply chain," International Journal of Production Economics, Elsevier, vol. 146(1), pages 153-160.
    2. Tomohiko Sakao & Abhijna Neramballi, 2020. "A Product/Service System Design Schema: Application to Big Data Analytics," Sustainability, MDPI, vol. 12(8), pages 1-22, April.
    3. Louise Lindkvist Haziri & Erik Sundin & Tomohiko Sakao, 2019. "Feedback from Remanufacturing: Its Unexploited Potential to Improve Future Product Design," Sustainability, MDPI, vol. 11(15), pages 1-24, July.
    4. Nepal, Bimal & Monplaisir, Leslie & Singh, Nanua, 2005. "Integrated fuzzy logic-based model for product modularization during concept development phase," International Journal of Production Economics, Elsevier, vol. 96(2), pages 157-174, May.
    5. Teunter, Ruud & Kaparis, Konstantinos & Tang, Ou, 2008. "Multi-product economic lot scheduling problem with separate production lines for manufacturing and remanufacturing," European Journal of Operational Research, Elsevier, vol. 191(3), pages 1241-1253, December.
    6. Bimal Nepal & Leslie Monplaisir & Nanua Singh, 2007. "A framework to integrate design for reliability and maintainability in modular product design," International Journal of Product Development, Inderscience Enterprises Ltd, vol. 4(5), pages 459-484.
    7. Noriyuki Shikata & Kiminori Gemba & Keisuke Uenishi, 2013. "A competitive product development strategy using modular architecture for product and service systems," International Journal of Business and Systems Research, Inderscience Enterprises Ltd, vol. 7(4), pages 375-394.
    8. Buyukozkan, G.Gulcin & Feyzioglu, Orhan, 2004. "A fuzzy-logic-based decision-making approach for new product development," International Journal of Production Economics, Elsevier, vol. 90(1), pages 27-45, July.
    9. Martin Charter & Casper Gray, 2008. "Remanufacturing and product design," International Journal of Product Development, Inderscience Enterprises Ltd, vol. 6(3/4), pages 375-392.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xing, Yijun & Liu, Yipeng, 2023. "Integrating product-service innovation into green supply chain management from a life cycle perspective: A systematic review and future research directions," Technovation, Elsevier, vol. 126(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sasha Shahbazi & Kerstin Johansen & Erik Sundin, 2021. "Product Design for Automated Remanufacturing—A Case Study of Electric and Electronic Equipment in Sweden," Sustainability, MDPI, vol. 13(16), pages 1-19, August.
    2. Gan, Shu-San & Pujawan, I. Nyoman & Suparno, & Widodo, Basuki, 2017. "Pricing decision for new and remanufactured product in a closed-loop supply chain with separate sales-channel," International Journal of Production Economics, Elsevier, vol. 190(C), pages 120-132.
    3. Wenyuan Wang & Daniel Y. Mo & Yue Wang & Mitchell M. Tseng, 2019. "Assessing the cost structure of component reuse in a product family for remanufacturing," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 575-587, February.
    4. Wong, Bo K. & Lai, Vincent S., 2011. "A survey of the application of fuzzy set theory in production and operations management: 1998-2009," International Journal of Production Economics, Elsevier, vol. 129(1), pages 157-168, January.
    5. Gan, Shu San & Pujawan, I. Nyoman & Suparno, & Widodo, Basuki, 2015. "Pricing decision model for new and remanufactured short-life cycle products with time-dependent demand," Operations Research Perspectives, Elsevier, vol. 2(C), pages 1-12.
    6. Liu, Wenjie & Liu, Wei & Shen, Ningning & Xu, Zhitao & Xie, Naiming & Chen, Jian & Zhou, Huiyu, 2022. "Pricing and collection decisions of a closed-loop supply chain with fuzzy demand," International Journal of Production Economics, Elsevier, vol. 245(C).
    7. Thyssen, Jesper & Israelsen, Poul & Jorgensen, Brian, 2006. "Activity-based costing as a method for assessing the economics of modularization--A case study and beyond," International Journal of Production Economics, Elsevier, vol. 103(1), pages 252-270, September.
    8. Timo Hilger & Florian Sahling & Horst Tempelmeier, 2016. "Capacitated dynamic production and remanufacturing planning under demand and return uncertainty," OR Spectrum: Quantitative Approaches in Management, Springer;Gesellschaft für Operations Research e.V., vol. 38(4), pages 849-876, October.
    9. Rahman, Shams & Subramanian, Nachiappan, 2012. "Factors for implementing end-of-life computer recycling operations in reverse supply chains," International Journal of Production Economics, Elsevier, vol. 140(1), pages 239-248.
    10. Sabbaghi, Mostafa & Behdad, Sara & Zhuang, Jun, 2016. "Managing consumer behavior toward on-time return of the waste electrical and electronic equipment: A game theoretic approach," International Journal of Production Economics, Elsevier, vol. 182(C), pages 545-563.
    11. Mohd Fahmi Bin Mad Ali & Mohd Khairol Anuar Bin Mohd Ariffin & Aidin Delgoshaei & Faizal Bin Mustapha & Eris Elianddy Bin Supeni, 2023. "A Comprehensive 3-Phase Framework for Determining the Customer’s Product Usage in a Food Supply Chain," Mathematics, MDPI, vol. 11(5), pages 1-20, February.
    12. Tilson, Vera & Zheng, Xiaobo, 2014. "Monopoly production and pricing of finitely durable goods with strategic consumers׳ fluctuating willingness to pay," International Journal of Production Economics, Elsevier, vol. 154(C), pages 217-232.
    13. Dingyue Zhang & Xuemei Zhang & Bin Shi & Jian Cao & Gengui Zhou, 2018. "Collection and Remanufacturing of Waste Products under Patent Protection and Government Regulation," Sustainability, MDPI, vol. 10(5), pages 1-22, May.
    14. Hao, Zhifeng & Yeh, Wei-Chang & Tan, Shi-Yi, 2021. "One-batch preempt deterioration-effect multi-state multi-rework network reliability problem and algorithms," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    15. Deepak Singhal & Sarat Kumar Jena & Satyabrata Aich & Sushanta Tripathy & Hee-Cheol Kim, 2021. "Remanufacturing for Circular Economy: Understanding the Impact of Manufacturer’s Incentive under Price Competition," Sustainability, MDPI, vol. 13(21), pages 1-19, October.
    16. Maiti, T. & Giri, B.C., 2017. "Two-way product recovery in a closed-loop supply chain with variable markup under price and quality dependent demand," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 259-272.
    17. Chang, Xiangyun & Xia, Haiyang & Zhu, Huiyun & Fan, Tijun & Zhao, Hongqing, 2015. "Production decisions in a hybrid manufacturing–remanufacturing system with carbon cap and trade mechanism," International Journal of Production Economics, Elsevier, vol. 162(C), pages 160-173.
    18. Nehal Elshaboury & Tarek Attia & Mohamed Marzouk, 2020. "Comparison of Several Aggregation Techniques for Deriving Analytic Network Process Weights," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 34(15), pages 4901-4919, December.
    19. Chenxu Ke & Bo Yan & Jingna Ji, 2023. "Pricing new and remanufactured products under patent protection and government intervention," Annals of Operations Research, Springer, vol. 324(1), pages 131-161, May.
    20. Kyung Sung Jung & Milind Dawande & H. Neil Geismar & V. Daniel R. Guide & Chelliah Sriskandarajah, 2016. "Supply planning models for a remanufacturer under just-in-time manufacturing environment with reverse logistics," Annals of Operations Research, Springer, vol. 240(2), pages 533-581, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:246:y:2022:i:c:s0925527321003807. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.