IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v128y2010i1p368-378.html
   My bibliography  Save this article

Life cycle cost for technology selection: A Case study in the manufacturing of injection moulds

Author

Listed:
  • Folgado, R.
  • Peças, P.
  • Henriques, E.

Abstract

During mould design phase different approaches are envisaged to materialize part production and they must be evaluated not only in technological criteria, but also in an economical perspective. However, the comparison of such alternative approaches is not always evident for the mould designer. The solution proposed in this paper, based on the development of a life cycle cost model, fosters its application as a methodology to compare two mould manufacturing alternatives: a spray metal shell mould backfilled with a resin and aluminium powder resin and a conventional machined aluminium mould. A better mould or a better alternative is the one that incurs in fewer life cycle costs, assuming that the injected part is produced within a conformed quality.

Suggested Citation

  • Folgado, R. & Peças, P. & Henriques, E., 2010. "Life cycle cost for technology selection: A Case study in the manufacturing of injection moulds," International Journal of Production Economics, Elsevier, vol. 128(1), pages 368-378, November.
    • Handle: RePEc:eee:proeco:v:128:y:2010:i:1:p:368-378
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925-5273(10)00279-3
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ramasesh, Ranga & Tirupati, Devanath & Vaitsos, Constantin A., 2010. "Modeling process-switching decisions under product life cycle uncertainty," International Journal of Production Economics, Elsevier, vol. 126(2), pages 236-246, August.
    2. Chiang, Tzu-An & Trappey, Amy J.C., 2007. "Development of value chain collaborative model for product lifecycle management and its LCD industry adoption," International Journal of Production Economics, Elsevier, vol. 109(1-2), pages 90-104, September.
    3. Johnson, Michael & Kirchain, Randolph, 2009. "Quantifying the effects of parts consolidation and development costs on material selection decisions: A process-based costing approach," International Journal of Production Economics, Elsevier, vol. 119(1), pages 174-186, May.
    4. Jiang, R. & Zhang, W. J. & Ji, P., 2003. "Required characteristics of statistical distribution models for life cycle cost estimation," International Journal of Production Economics, Elsevier, vol. 83(2), pages 185-194, February.
    5. Jiang, R. & Zhang, W. J. & Ji, P., 2004. "Selecting the best alternative based on life-cycle cost distributions of alternatives," International Journal of Production Economics, Elsevier, vol. 89(1), pages 69-75, May.
    6. Tang, Ou & Grubbstrom, Robert W. & Zanoni, Simone, 2007. "Planned lead time determination in a make-to-order remanufacturing system," International Journal of Production Economics, Elsevier, vol. 108(1-2), pages 426-435, July.
    7. Li, Minbo & Wang, Jianguo & Wong, Yoke San & Lee, Kim Seng, 2005. "A collaborative application portal for the mould industry," International Journal of Production Economics, Elsevier, vol. 96(2), pages 233-247, May.
    8. Wu, Chin-Chun & Lin, Pei-Chun & Chou, Chao-Yu, 2006. "Determination of price and warranty length for a normal lifetime distributed product," International Journal of Production Economics, Elsevier, vol. 102(1), pages 95-107, July.
    9. Qian, Li & Ben-Arieh, David, 2008. "Parametric cost estimation based on activity-based costing: A case study for design and development of rotational parts," International Journal of Production Economics, Elsevier, vol. 113(2), pages 805-818, June.
    10. Bullinger, Hans-Jorg, 1999. "Turbulent times require creative thinking: New European concepts in production management," International Journal of Production Economics, Elsevier, vol. 60(1), pages 9-27, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Quintana, Guillem & Ciurana, Joaquim, 2011. "Cost estimation support tool for vertical high speed machines based on product characteristics and productivity requirements," International Journal of Production Economics, Elsevier, vol. 134(1), pages 188-195, November.
    2. Saccani, Nicola & Perona, Marco & Bacchetti, Andrea, 2017. "The total cost of ownership of durable consumer goods: A conceptual model and an empirical application," International Journal of Production Economics, Elsevier, vol. 183(PA), pages 1-13.
    3. Zębala, Wojciech & Plaza, Malgorzata, 2014. "Comparative study of 3- and 5-axis CNC centers for free-form machining of difficult-to-cut material," International Journal of Production Economics, Elsevier, vol. 158(C), pages 345-358.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Johnson, Michael D. & Kirchain, Randolph E., 2009. "Quantifying the effects of product family decisions on material selection: A process-based costing approach," International Journal of Production Economics, Elsevier, vol. 120(2), pages 653-668, August.
    2. Duffner, Fabian & Mauler, Lukas & Wentker, Marc & Leker, Jens & Winter, Martin, 2021. "Large-scale automotive battery cell manufacturing: Analyzing strategic and operational effects on manufacturing costs," International Journal of Production Economics, Elsevier, vol. 232(C).
    3. Tomino, Takahiro & Park, Youngwon & Hong, Paul & Roh, James Jungbae, 2009. "Market flexible customizing system (MFCS) of Japanese vehicle manufacturers: An analysis of Toyota, Nissan and Mitsubishi," International Journal of Production Economics, Elsevier, vol. 118(2), pages 375-386, April.
    4. Darghouth, M.N. & Ait-kadi, D. & Chelbi, A., 2017. "Joint optimization of design, warranty and price for products sold with maintenance service contracts," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 197-208.
    5. Asif Ali & Ashok Aima & Jaya Bhasin & Robert D. Hisrich, 2021. "Measuring Entrepreneurial Orientation in Developing Economies: Scale Development and Validation," Jindal Journal of Business Research, , vol. 10(2), pages 147-162, December.
    6. Gmelin, Harald & Seuring, Stefan, 2014. "Achieving sustainable new product development by integrating product life-cycle management capabilities," International Journal of Production Economics, Elsevier, vol. 154(C), pages 166-177.
    7. Askarany, Davood & Yazdifar, Hassan, 2012. "An investigation into the mixed reported adoption rates for ABC: Evidence from Australia, New Zealand and the UK," International Journal of Production Economics, Elsevier, vol. 135(1), pages 430-439.
    8. K. Reddy & H. S. Venter & M. S. Olivier, 2012. "Using time-driven activity-based costing to manage digital forensic readiness in large organisations," Information Systems Frontiers, Springer, vol. 14(5), pages 1061-1077, December.
    9. Wei Xie & Haitao Liao, 2013. "Some aspects in estimating warranty and post‐warranty repair demands," Naval Research Logistics (NRL), John Wiley & Sons, vol. 60(6), pages 499-511, September.
    10. Hu, Guiping & Bidanda, Bopaya, 2009. "Modeling sustainable product lifecycle decision support systems," International Journal of Production Economics, Elsevier, vol. 122(1), pages 366-375, November.
    11. Akamphon, Sappinandana & Sukkasi, Sittha & Boonyongmaneerat, Yuttanant, 2012. "Reduction of zinc consumption with enhanced corrosion protection in hot-dip galvanized coatings: A process-based cost analysis," Resources, Conservation & Recycling, Elsevier, vol. 58(C), pages 1-7.
    12. Kirkizoğlu, Zeynep & Karaer, Özgen, 2022. "After-sales service and warranty decisions of a durable goods manufacturer," Omega, Elsevier, vol. 113(C).
    13. Lacroix, Rachel & Seifert, Ralf W. & Timonina-Farkas, Anna, 2021. "Benefiting from additive manufacturing for mass customization across the product life cycle," Operations Research Perspectives, Elsevier, vol. 8(C).
    14. Antonio Armillotta, 2021. "On the role of complexity in machining time estimation," Journal of Intelligent Manufacturing, Springer, vol. 32(8), pages 2281-2299, December.
    15. Louly, Mohamed-Aly & Dolgui, Alexandre, 2011. "Optimal time phasing and periodicity for MRP with POQ policy," International Journal of Production Economics, Elsevier, vol. 131(1), pages 76-86, May.
    16. Roychaudhuri, Pritam Sankar & Kazantzi, Vasiliki & Foo, Dominic C.Y. & Tan, Raymond R. & Bandyopadhyay, Santanu, 2017. "Selection of energy conservation projects through Financial Pinch Analysis," Energy, Elsevier, vol. 138(C), pages 602-615.
    17. Kinoshita, Yuki & Yamada, Tetsuo & Gupta, Surendra M. & Ishigaki, Aya & Inoue, Masato, 2020. "Decision support model of environmentally friendly and economical material strategy for life cycle cost and recyclable weight," International Journal of Production Economics, Elsevier, vol. 224(C).
    18. Tanmay Sen & Ritwik Bhattacharya & Biswabrata Pradhan & Yogesh Mani Tripathi, 2020. "Determination of Bayesian optimal warranty length under Type-II unified hybrid censoring scheme," Papers 2004.08533, arXiv.org.
    19. Christophe Combemale & Kate S Whitefoot & Laurence Ales & Erica R H Fuchs, 2021. "Not all technological change is equal: how the separability of tasks mediates the effect of technology change on skill demand [Patterns of industrial innovation]," Industrial and Corporate Change, Oxford University Press and the Associazione ICC, vol. 30(6), pages 1361-1387.
    20. Kyläheiko, Kalevi & Jantunen, Ari & Puumalainen, Kaisu & Luukka, Pasi, 2011. "Value of knowledge--Technology strategies in different knowledge regimes," International Journal of Production Economics, Elsevier, vol. 131(1), pages 273-287, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:128:y:2010:i:1:p:368-378. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.