IDEAS home Printed from https://ideas.repec.org/a/eee/jrpoli/v73y2021ics030142072100221x.html
   My bibliography  Save this article

Critical appraisal of recycling indicators used in European criticality exercises and circularity monitoring

Author

Listed:
  • Tercero Espinoza, Luis A.

Abstract

Recycling indicators are an important part of criticality assessments and circularity reporting. This paper examines the definitions of recycling indicators used in EU reporting, compares and contrasts them with definitions from the literature, and probes their fitness for use in European criticality studies and circularity reporting. In particular, it is shown that the end-of-life recycling input rate (EoLRIR, the material-centric indicator used both in criticality assessments and circular economy monitoring) is inappropriate on its own for measuring progress in the circular economy. The reason is that its value strongly depends on the lifetime of products and on demand growth, obscuring the efficacy of the waste management system, which is more directly reflected by the end-of-life recycling rate for individual elements. Furthermore, the differences in definition of EoLRIR used in EU reporting vs. the literature can be misleading and impedes direct comparison with other regions. The data basis is also key in appropriately measuring recycling performance. Since the EU has undertaken significant efforts to improve the information basis for recycling indicators, a progression of estimates of recycling indicators between the last two criticality exercises is reported and discussed. Finally, a critical review of the current status of the EoLRIR is presented, leading to recommendations for better use and communication of recycling indicators in European documents on the topics of raw materials criticality and circularity monitoring.

Suggested Citation

  • Tercero Espinoza, Luis A., 2021. "Critical appraisal of recycling indicators used in European criticality exercises and circularity monitoring," Resources Policy, Elsevier, vol. 73(C).
  • Handle: RePEc:eee:jrpoli:v:73:y:2021:i:c:s030142072100221x
    DOI: 10.1016/j.resourpol.2021.102208
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030142072100221X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.resourpol.2021.102208?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nobuo Sekine & Ichiro Daigo & Yoshikazu Goto, 2017. "Dynamic Substance Flow Analysis of Neodymium and Dysprosium Associated with Neodymium Magnets in Japan," Journal of Industrial Ecology, Yale University, vol. 21(2), pages 356-367, April.
    2. Bertram, M. & Ramkumar, S. & Rechberger, H. & Rombach, G. & Bayliss, C. & Martchek, K.J. & Müller, D.B. & Liu, G., 2017. "A regionally-linked, dynamic material flow modelling tool for rolled, extruded and cast aluminium products," Resources, Conservation & Recycling, Elsevier, vol. 125(C), pages 48-69.
    3. T. E. Graedel & Julian Allwood & Jean‐Pierre Birat & Matthias Buchert & Christian Hagelüken & Barbara K. Reck & Scott F. Sibley & Guido Sonnemann, 2011. "What Do We Know About Metal Recycling Rates?," Journal of Industrial Ecology, Yale University, vol. 15(3), pages 355-366, June.
    4. Kavlak, Goksin & Graedel, T.E., 2013. "Global anthropogenic tellurium cycles for 1940–2010," Resources, Conservation & Recycling, Elsevier, vol. 76(C), pages 21-26.
    5. Andersson, Magnus & Ljunggren Söderman, Maria & Sandén, Björn A., 2019. "Challenges of recycling multiple scarce metals: The case of Swedish ELV and WEEE recycling," Resources Policy, Elsevier, vol. 63(C), pages 1-1.
    6. Christina Licht & Laura Talens Peiró & Gara Villalba, 2015. "Global Substance Flow Analysis of Gallium, Germanium, and Indium: Quantification of Extraction, Uses, and Dissipative Losses within their Anthropogenic Cycles," Journal of Industrial Ecology, Yale University, vol. 19(5), pages 890-903, October.
    7. Wei‐Qiang Chen, 2013. "Recycling Rates of Aluminum in the United States," Journal of Industrial Ecology, Yale University, vol. 17(6), pages 926-938, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tercero Espinoza, Luis Alberto & Soulier, Marcel, 2017. "Defining regional recycling indicators for metals: An extension of global recycling indicators to regional systems with open boundaries," Working Papers "Sustainability and Innovation" S04/2017, Fraunhofer Institute for Systems and Innovation Research (ISI).
    2. Panchal, Rohit & Singh, Anju & Diwan, Hema, 2021. "Economic potential of recycling e-waste in India and its impact on import of materials," Resources Policy, Elsevier, vol. 74(C).
    3. Esther Thiébaud & Lorenz M. Hilty & Mathias Schluep & Heinz W. Böni & Martin Faulstich, 2018. "Where Do Our Resources Go? Indium, Neodymium, and Gold Flows Connected to the Use of Electronic Equipment in Switzerland," Sustainability, MDPI, vol. 10(8), pages 1-17, July.
    4. Helbig, Christoph & Bradshaw, Alex M. & Kolotzek, Christoph & Thorenz, Andrea & Tuma, Axel, 2016. "Supply risks associated with CdTe and CIGS thin-film photovoltaics," Applied Energy, Elsevier, vol. 178(C), pages 422-433.
    5. Meylan, Grégoire & Reck, Barbara K., 2017. "The anthropogenic cycle of zinc: Status quo and perspectives," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 1-10.
    6. Maung, Kyaw Nyunt & Yoshida, Tomoharu & Liu, Gang & Lwin, Cherry Myo & Muller, Daniel B. & Hashimoto, Seiji, 2017. "Assessment of secondary aluminum reserves of nations," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 34-41.
    7. Yulia Lapko & Andrea Trianni & Cali Nuur & Donato Masi, 2019. "In Pursuit of Closed‐Loop Supply Chains for Critical Materials: An Exploratory Study in the Green Energy Sector," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 182-196, February.
    8. Adriano Cordisco & Riccardo Melloni & Lucia Botti, 2022. "Sustainable Circular Economy for the Integration of Disadvantaged People: A Preliminary Study on the Reuse of Lithium-Ion Batteries," Sustainability, MDPI, vol. 14(13), pages 1-15, July.
    9. Guo, Tianjiao & Geng, Yong & Song, Xiaoqian & Rui, Xue & Ge, Zewen, 2023. "Tracing magnesium flows in China: A dynamic material flow analysis," Resources Policy, Elsevier, vol. 83(C).
    10. Chen, Wei-Qiang & Graedel, T.E., 2012. "Dynamic analysis of aluminum stocks and flows in the United States: 1900–2009," Ecological Economics, Elsevier, vol. 81(C), pages 92-102.
    11. Tomer Fishman & Rupert J. Myers & Orlando Rios & T.E. Graedel, 2018. "Implications of Emerging Vehicle Technologies on Rare Earth Supply and Demand in the United States," Resources, MDPI, vol. 7(1), pages 1-15, January.
    12. Minxi Wang & Ping Liu & Zhaoliang Gu & Hong Cheng & Xin Li, 2019. "A Scientometric Review of Resource Recycling Industry," IJERPH, MDPI, vol. 16(23), pages 1-18, November.
    13. Pérez-Sánchez, Laura À. & Velasco-Fernández, Raúl & Giampietro, Mario, 2022. "Factors and actions for the sustainability of the residential sector. The nexus of energy, materials, space, and time use," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    14. Alexandre Tisserant & Stefan Pauliuk, 2016. "Matching global cobalt demand under different scenarios for co-production and mining attractiveness," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 5(1), pages 1-19, December.
    15. Elshkaki, Ayman & Graedel, T.E., 2015. "Solar cell metals and their hosts: A tale of oversupply and undersupply," Applied Energy, Elsevier, vol. 158(C), pages 167-177.
    16. Alexandre Tisserant & Stefan Pauliuk, 2016. "Matching global cobalt demand under different scenarios for co-production and mining attractiveness," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 5(1), pages 1-19, December.
    17. Fu, Xinkai & Ueland, Stian M. & Olivetti, Elsa, 2017. "Econometric modeling of recycled copper supply," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 219-226.
    18. Berzi, Lorenzo & Delogu, Massimo & Pierini, Marco & Romoli, Filippo, 2016. "Evaluation of the end-of-life performance of a hybrid scooter with the application of recyclability and recoverability assessment methods," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 140-155.
    19. Erik G. Hansen & Ferdinand Revellio, 2020. "Circular value creation architectures: Make, ally, buy, or laissez‐faire," Journal of Industrial Ecology, Yale University, vol. 24(6), pages 1250-1273, December.
    20. Andersson, Magnus & Ljunggren Söderman, Maria & Sandén, Björn A., 2019. "Challenges of recycling multiple scarce metals: The case of Swedish ELV and WEEE recycling," Resources Policy, Elsevier, vol. 63(C), pages 1-1.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:jrpoli:v:73:y:2021:i:c:s030142072100221x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/inca/30467 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.