IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v71y2014icp656-664.html
   My bibliography  Save this article

Diesel engine spray characteristics prediction with hybridized artificial neural network optimized by genetic algorithm

Author

Listed:
  • Taghavifar, Hadi
  • Khalilarya, Shahram
  • Jafarmadar, Samad

Abstract

ANN (artificial neural network) modeling is adopted along GA (genetic algorithm) optimization method in order to investigate spray behavior as function of nozzle and engine variant parameters such as crank-angle, nozzle tip mass flow rate, turbulence, and nozzle discharge pressure. Spray quality is measured in SMD (Sauter mean diameter) and spray liquid tip penetration prospective. Experimental data were used at limited engine condition and elsewhere requisite data was acquired with the aid of curve fitting and extrapolation of CFD (computational fluid dynamics) numerical simulation results. Engine crank-angle, vapor mass flow rate, turbulence, and nozzle outlet pressure were taken as input layer while spray penetration and SMD were used as output layer. It is found out that Levenburg–Marquardt training algorithm has the least mean square error for ANN and ANN-GA (artificial neural network-genetic algorithm) at 24, 30 neurons in hidden layer with the amount of 0.8994, 0.3348, respectively. The coefficient of determination (R2) for penetration equals 0.994 whereas SMD yields lower amount of 0.992. By application of GA to optimize the network's interconnecting weights, R2 values have been enhanced to 0.999 for SMD and to 0.998 for penetration (both values are close to unity). Results indicate that the ANN-GA improved the spray specification modeling simply and with acceptable accuracy.

Suggested Citation

  • Taghavifar, Hadi & Khalilarya, Shahram & Jafarmadar, Samad, 2014. "Diesel engine spray characteristics prediction with hybridized artificial neural network optimized by genetic algorithm," Energy, Elsevier, vol. 71(C), pages 656-664.
    • Handle: RePEc:eee:energy:v:71:y:2014:i:c:p:656-664
    DOI: 10.1016/j.energy.2014.05.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544214005556
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2014.05.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rashidi, M.M. & Galanis, N. & Nazari, F. & Basiri Parsa, A. & Shamekhi, L., 2011. "Parametric analysis and optimization of regenerative Clausius and organic Rankine cycles with two feedwater heaters using artificial bees colony and artificial neural network," Energy, Elsevier, vol. 36(9), pages 5728-5740.
    2. Roy, Sumit & Banerjee, Rahul & Bose, Probir Kumar, 2014. "Performance and exhaust emissions prediction of a CRDI assisted single cylinder diesel engine coupled with EGR using artificial neural network," Applied Energy, Elsevier, vol. 119(C), pages 330-340.
    3. Kara Togun, Necla & Baysec, Sedat, 2010. "Prediction of torque and specific fuel consumption of a gasoline engine by using artificial neural networks," Applied Energy, Elsevier, vol. 87(1), pages 349-355, January.
    4. Çay, Yusuf & Korkmaz, Ibrahim & Çiçek, Adem & Kara, Fuat, 2013. "Prediction of engine performance and exhaust emissions for gasoline and methanol using artificial neural network," Energy, Elsevier, vol. 50(C), pages 177-186.
    5. Rashidi, M.M. & Ali, M. & Freidoonimehr, N. & Nazari, F., 2013. "Parametric analysis and optimization of entropy generation in unsteady MHD flow over a stretching rotating disk using artificial neural network and particle swarm optimization algorithm," Energy, Elsevier, vol. 55(C), pages 497-510.
    6. Deh Kiani, M. Kiani & Ghobadian, B. & Tavakoli, T. & Nikbakht, A.M. & Najafi, G., 2010. "Application of artificial neural networks for the prediction of performance and exhaust emissions in SI engine using ethanol- gasoline blends," Energy, Elsevier, vol. 35(1), pages 65-69.
    7. Zhang, Zijun & Zeng, Yaohui & Kusiak, Andrew, 2012. "Minimizing pump energy in a wastewater processing plant," Energy, Elsevier, vol. 47(1), pages 505-514.
    8. Ghobadian, B. & Rahimi, H. & Nikbakht, A.M. & Najafi, G. & Yusaf, T.F., 2009. "Diesel engine performance and exhaust emission analysis using waste cooking biodiesel fuel with an artificial neural network," Renewable Energy, Elsevier, vol. 34(4), pages 976-982.
    9. Siddhartha, & Sharma, Naveen & Varun,, 2012. "A particle swarm optimization algorithm for optimization of thermal performance of a smooth flat plate solar air heater," Energy, Elsevier, vol. 38(1), pages 406-413.
    10. Taghavifar, Hamid & Mardani, Aref, 2014. "A comparative trend in forecasting ability of artificial neural networks and regressive support vector machine methodologies for energy dissipation modeling of off-road vehicles," Energy, Elsevier, vol. 66(C), pages 569-576.
    11. Taghavifar, Hamid & Mardani, Aref, 2014. "Applying a supervised ANN (artificial neural network) approach to the prognostication of driven wheel energy efficiency indices," Energy, Elsevier, vol. 68(C), pages 651-657.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Taghavifar, Hamid & Mardani, Aref & Hosseinloo, Ashkan Haji, 2015. "Appraisal of artificial neural network-genetic algorithm based model for prediction of the power provided by the agricultural tractors," Energy, Elsevier, vol. 93(P2), pages 1704-1710.
    2. Bahri, Bahram & Shahbakhti, Mahdi & Aziz, Azhar Abdul, 2017. "Real-time modeling of ringing in HCCI engines using artificial neural networks," Energy, Elsevier, vol. 125(C), pages 509-518.
    3. Chang, Mengzhao & Park, Suhan, 2023. "Predictions and analysis of flash boiling spray characteristics of gasoline direct injection injectors based on optimized machine learning algorithm," Energy, Elsevier, vol. 262(PA).
    4. Chen, Hao & Wang, Yu & Zuo, Mingsheng & Zhang, Chao & Jia, Ninghong & Liu, Xiliang & Yang, Shenglai, 2022. "A new prediction model of CO2 diffusion coefficient in crude oil under reservoir conditions based on BP neural network," Energy, Elsevier, vol. 239(PC).
    5. Krishnamoorthi, M. & Malayalamurthi, R., 2018. "Engine characteristics analysis of chaulmoogra oil blends and corrosion analysis of injector nozzle using scanning electron microscopy/energy dispersive spectroscopy," Energy, Elsevier, vol. 165(PB), pages 1292-1319.
    6. Zhou, Yifan & Qi, Wenyuan & Zhang, Yuyin, 2020. "Investigation on cyclic variation of diesel spray and a reconsideration of penetration model," Energy, Elsevier, vol. 211(C).
    7. Haruki Tajima & Takuya Tomidokoro & Takeshi Yokomori, 2022. "Deep Learning for Knock Occurrence Prediction in SI Engines," Energies, MDPI, vol. 15(24), pages 1-14, December.
    8. Hazar, Hanbey & Gul, Hakan, 2016. "Modeling analysis of chrome carbide (Cr3C2) coating on parts of combustion chamber of a SI engine," Energy, Elsevier, vol. 115(P1), pages 76-87.
    9. Tarafdar, Anirban & Majumder, P. & Deb, Madhujit & Bera, U.K., 2023. "Application of a q-rung orthopair hesitant fuzzy aggregated Type-3 fuzzy logic in the characterization of performance-emission profile of a single cylinder CI-engine operating with hydrogen in dual fu," Energy, Elsevier, vol. 269(C).
    10. Sun, Wei & Xu, Yanfeng, 2016. "Financial security evaluation of the electric power industry in China based on a back propagation neural network optimized by genetic algorithm," Energy, Elsevier, vol. 101(C), pages 366-379.
    11. Garg, A. & Lam, Jasmine Siu Lee, 2017. "Design of explicit models for estimating efficiency characteristics of microbial fuel cells," Energy, Elsevier, vol. 134(C), pages 136-156.
    12. Tian, Junjian & Liu, Yu & Bi, Haobo & Li, Fengyu & Bao, Lin & Han, Kai & Zhou, Wenliang & Ni, Zhanshi & Lin, Qizhao, 2022. "Experimental study on the spray characteristics of octanol diesel and prediction of spray tip penetration by ANN model," Energy, Elsevier, vol. 239(PA).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mehra, Roopesh Kumar & Duan, Hao & Luo, Sijie & Rao, Anas & Ma, Fanhua, 2018. "Experimental and artificial neural network (ANN) study of hydrogen enriched compressed natural gas (HCNG) engine under various ignition timings and excess air ratios," Applied Energy, Elsevier, vol. 228(C), pages 736-754.
    2. Subrata Bhowmik & Rajsekhar Panua & Subrata K Ghosh & Abhishek Paul & Durbadal Debroy, 2018. "Prediction of performance and exhaust emissions of diesel engine fuelled with adulterated diesel: An artificial neural network assisted fuzzy-based topology optimization," Energy & Environment, , vol. 29(8), pages 1413-1437, December.
    3. Domínguez-Sáez, Aida & Rattá, Giuseppe A. & Barrios, Carmen C., 2018. "Prediction of exhaust emission in transient conditions of a diesel engine fueled with animal fat using Artificial Neural Network and Symbolic Regression," Energy, Elsevier, vol. 149(C), pages 675-683.
    4. Rossi, Francesco & Velázquez, David, 2015. "A methodology for energy savings verification in industry with application for a CHP (combined heat and power) plant," Energy, Elsevier, vol. 89(C), pages 528-544.
    5. Kshirsagar, Charudatta M. & Anand, Ramanathan, 2017. "Artificial neural network applied forecast on a parametric study of Calophyllum inophyllum methyl ester-diesel engine out responses," Applied Energy, Elsevier, vol. 189(C), pages 555-567.
    6. Mousapour, Ashkan & Hajipour, Alireza & Rashidi, Mohammad Mehdi & Freidoonimehr, Navid, 2016. "Performance evaluation of an irreversible Miller cycle comparing FTT (finite-time thermodynamics) analysis and ANN (artificial neural network) prediction," Energy, Elsevier, vol. 94(C), pages 100-109.
    7. Taghavifar, Hamid & Mardani, Aref & Karim Maslak, Haleh, 2015. "A comparative study between artificial neural networks and support vector regression for modeling of the dissipated energy through tire-obstacle collision dynamics," Energy, Elsevier, vol. 89(C), pages 358-364.
    8. Tian, Junjian & Liu, Yu & Bi, Haobo & Li, Fengyu & Bao, Lin & Han, Kai & Zhou, Wenliang & Ni, Zhanshi & Lin, Qizhao, 2022. "Experimental study on the spray characteristics of octanol diesel and prediction of spray tip penetration by ANN model," Energy, Elsevier, vol. 239(PA).
    9. Bahri, Bahram & Shahbakhti, Mahdi & Kannan, Kaushik & Aziz, Azhar Abdul, 2016. "Identification of ringing operation for low temperature combustion engines," Applied Energy, Elsevier, vol. 171(C), pages 142-152.
    10. Dey, Suman & Reang, Narath Moni & Majumder, Arindam & Deb, Madhujit & Das, Pankaj Kumar, 2020. "A hybrid ANN-Fuzzy approach for optimization of engine operating parameters of a CI engine fueled with diesel-palm biodiesel-ethanol blend," Energy, Elsevier, vol. 202(C).
    11. Bendu, Harisankar & Deepak, B.B.V.L. & Murugan, S., 2017. "Multi-objective optimization of ethanol fuelled HCCI engine performance using hybrid GRNN–PSO," Applied Energy, Elsevier, vol. 187(C), pages 601-611.
    12. Rashidi, M.M. & Ali, M. & Freidoonimehr, N. & Nazari, F., 2013. "Parametric analysis and optimization of entropy generation in unsteady MHD flow over a stretching rotating disk using artificial neural network and particle swarm optimization algorithm," Energy, Elsevier, vol. 55(C), pages 497-510.
    13. Ganesan, P. & Rajakarunakaran, S. & Thirugnanasambandam, M. & Devaraj, D., 2015. "Artificial neural network model to predict the diesel electric generator performance and exhaust emissions," Energy, Elsevier, vol. 83(C), pages 115-124.
    14. Liu, Jinlong & Huang, Qiao & Ulishney, Christopher & Dumitrescu, Cosmin E., 2021. "Machine learning assisted prediction of exhaust gas temperature of a heavy-duty natural gas spark ignition engine," Applied Energy, Elsevier, vol. 300(C).
    15. Mohamed Ismail, Harun & Ng, Hoon Kiat & Queck, Cheen Wei & Gan, Suyin, 2012. "Artificial neural networks modelling of engine-out responses for a light-duty diesel engine fuelled with biodiesel blends," Applied Energy, Elsevier, vol. 92(C), pages 769-777.
    16. Taghavifar, Hamid & Mardani, Aref & Hosseinloo, Ashkan Haji, 2015. "Appraisal of artificial neural network-genetic algorithm based model for prediction of the power provided by the agricultural tractors," Energy, Elsevier, vol. 93(P2), pages 1704-1710.
    17. Muhammad Usman & Haris Hussain & Fahid Riaz & Muneeb Irshad & Rehmat Bashir & Muhammad Haris Shah & Adeel Ahmad Zafar & Usman Bashir & M. A. Kalam & M. A. Mujtaba & Manzoore Elahi M. Soudagar, 2021. "Artificial Neural Network Led Optimization of Oxyhydrogen Hybridized Diesel Operated Engine," Sustainability, MDPI, vol. 13(16), pages 1-24, August.
    18. Jarosław Ziółkowski & Mateusz Oszczypała & Jerzy Małachowski & Joanna Szkutnik-Rogoż, 2021. "Use of Artificial Neural Networks to Predict Fuel Consumption on the Basis of Technical Parameters of Vehicles," Energies, MDPI, vol. 14(9), pages 1-23, May.
    19. Dhahad, Hayder Abed & Hasan, Ahmed Mudheher & Chaichan, Miqdam Tariq & Kazem, Hussein A., 2022. "Prognostic of diesel engine emissions and performance based on an intelligent technique for nanoparticle additives," Energy, Elsevier, vol. 238(PB).
    20. Najafi, Gholamhassan & Ghobadian, Barat & Yusaf, Talal & Safieddin Ardebili, Seyed Mohammad & Mamat, Rizalman, 2015. "Optimization of performance and exhaust emission parameters of a SI (spark ignition) engine with gasoline–ethanol blended fuels using response surface methodology," Energy, Elsevier, vol. 90(P2), pages 1815-1829.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:71:y:2014:i:c:p:656-664. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.