IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v64y2014icp234-241.html
   My bibliography  Save this article

Influence of electrodeposition modes on the supercapacitive performance of Co3O4 electrodes

Author

Listed:
  • Jagadale, Ajay D.
  • Kumbhar, Vijay S.
  • Bulakhe, Ravindra N.
  • Lokhande, Chandrakant D.

Abstract

In the present paper, the different modes of electrodeposition such as PD (potentiodynamic), PS (potentiostatic) and GS (galvanostatic) have been successfully employed for the deposition of cobalt oxide and subsequently the effect of these modes on supercapacitive performance has been studied. The films were characterized for structural and morphological properties using XRD (X–ray diffraction), FTIR (fourier transform infrared spectroscopy), FT–Raman spectroscopy and SEM (scanning electron microscopy). The electrochemical performance of the films was tested using cyclic voltammetry, galvanostatic charge-discharge and EIS (electrochemical impedance spectroscopy) techniques. The cobalt oxide film deposited by potentiostatic mode showed maximum values of specific capacitance, specific energy and specific power as 248 F g–1, 2.3 Wh kg−1 and 3.5 kW kg−1.

Suggested Citation

  • Jagadale, Ajay D. & Kumbhar, Vijay S. & Bulakhe, Ravindra N. & Lokhande, Chandrakant D., 2014. "Influence of electrodeposition modes on the supercapacitive performance of Co3O4 electrodes," Energy, Elsevier, vol. 64(C), pages 234-241.
    • Handle: RePEc:eee:energy:v:64:y:2014:i:c:p:234-241
    DOI: 10.1016/j.energy.2013.10.016
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544213008657
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.10.016?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tamilarasan, P. & Ramaprabhu, S., 2013. "Graphene based all-solid-state supercapacitors with ionic liquid incorporated polyacrylonitrile electrolyte," Energy, Elsevier, vol. 51(C), pages 374-381.
    2. Yang, Zunxian & Meng, Qing & Guo, Zaiping & Yu, Xuebin & Guo, Tailiang & Zeng, Rong, 2013. "Highly reversible lithium storage in uniform Li4Ti5O12/carbon hybrid nanowebs as anode material for lithium-ion batteries," Energy, Elsevier, vol. 55(C), pages 925-932.
    3. Karandikar, Parashuram Balwant & Talange, Dhananjay Balu & Mhaskar, Uday Prakashrao & Bansal, Ramesh, 2012. "Development, modeling and characterization of aqueous metal oxide based supercapacitor," Energy, Elsevier, vol. 40(1), pages 131-138.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yuan, Chuanjun & Lin, Haibo & Lu, Haiyan & Xing, Endong & Zhang, Yusi & Xie, Bingyao, 2015. "Electrodeposition of three-dimensional ZnO@MnO2 core–shell nanocables as high-performance electrode material for supercapacitors," Energy, Elsevier, vol. 93(P2), pages 1259-1266.
    2. Sakthivel, Mani & Ramki, Settu & Chen, Shen-Ming & Ho, Kuo-Chuan, 2022. "Defect rich Se–CoWS2 as anode and banana flower skin-derived activated carbon channels with interconnected porous structure as cathode materials for asymmetric supercapacitor application," Energy, Elsevier, vol. 257(C).
    3. Shao, Zhou & Li, Hongji & Li, Mingji & Li, Cuiping & Qu, Changqing & Yang, Baohe, 2015. "Fabrication of polyaniline nanowire/TiO2 nanotube array electrode for supercapacitors," Energy, Elsevier, vol. 87(C), pages 578-585.
    4. Miao, Fujun & Shao, Changlu & Li, Xinghua & Lu, Na & Wang, Kexin & Zhang, Xin & Liu, Yichun, 2016. "Polyaniline-coated electrospun carbon nanofibers with high mass loading and enhanced capacitive performance as freestanding electrodes for flexible solid-state supercapacitors," Energy, Elsevier, vol. 95(C), pages 233-241.
    5. Mohd Nor, Najah Syahirah & Deraman, Mohamad & Omar, Ramli & Awitdrus, & Farma, Rakhmawati & Basri, Nur Hamizah & Mohd Dolah, Besek Nurdiana & Mamat, Nurul Fatin & Yatim, Baharudin & Md Daud, Mohd Nori, 2015. "Influence of gamma irradiation exposure on the performance of supercapacitor electrodes made from oil palm empty fruit bunches," Energy, Elsevier, vol. 79(C), pages 183-194.
    6. Khalaj, Maryam & Sedghi, Arman & Miankushki, Hoda Nourmohammadi & Golkhatmi, Sanaz Zarabi, 2019. "Synthesis of novel graphene/Co3O4/polypyrrole ternary nanocomposites as electrochemically enhanced supercapacitor electrodes," Energy, Elsevier, vol. 188(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Murashko, Kirill & Nevstrueva, Daria & Pihlajamäki, Arto & Koiranen, Tuomas & Pyrhönen, Juha, 2017. "Cellulose and activated carbon based flexible electrical double-layer capacitor electrode: Preparation and characterization," Energy, Elsevier, vol. 119(C), pages 435-441.
    2. Singh, Manoj K. & Suleman, Mohd & Kumar, Yogesh & Hashmi, S.A., 2015. "A novel configuration of electrical double layer capacitor with plastic crystal based gel polymer electrolyte and graphene nano-platelets as electrodes: A high rate performance," Energy, Elsevier, vol. 80(C), pages 465-473.
    3. Kim, Jongmin & Ju, Haeri & Inamdar, Akbar I. & Jo, Yongcheol & Han, J. & Kim, Hyungsang & Im, Hyunsik, 2014. "Synthesis and enhanced electrochemical supercapacitor properties of Ag–MnO2–polyaniline nanocomposite electrodes," Energy, Elsevier, vol. 70(C), pages 473-477.
    4. Huang, Ke-Jing & Wang, Lan & Zhang, Ji-Zong & Wang, Ling-Ling & Mo, Yan-Ping, 2014. "One-step preparation of layered molybdenum disulfide/multi-walled carbon nanotube composites for enhanced performance supercapacitor," Energy, Elsevier, vol. 67(C), pages 234-240.
    5. Li, Qun & Yin, Longwei & Ma, Jingyun & Li, Zhaoqiang & Zhang, Zhiwei & Chen, Ailian & Li, Caixia, 2015. "Mesoporous silicon/carbon hybrids with ordered pore channel retention and tunable carbon incorporated content as high performance anode materials for lithium-ion batteries," Energy, Elsevier, vol. 85(C), pages 159-166.
    6. Farmann, Alexander & Waag, Wladislaw & Sauer, Dirk Uwe, 2016. "Application-specific electrical characterization of high power batteries with lithium titanate anodes for electric vehicles," Energy, Elsevier, vol. 112(C), pages 294-306.
    7. Pang, Haidong & Yang, Zunxian & Lv, Jun & Yan, Wenhuan & Guo, Tailiang, 2014. "Novel MnOx@Carbon hybrid nanowires with core/shell architecture as highly reversible anode materials for lithium ion batteries," Energy, Elsevier, vol. 69(C), pages 392-398.
    8. Xu, Le & Zhao, Yan & Lian, Jiabiao & Xu, Yuanguo & Bao, Jian & Qiu, Jingxia & Xu, Li & Xu, Hui & Hua, Mingqing & Li, Huaming, 2017. "Morphology controlled preparation of ZnCo2O4 nanostructures for asymmetric supercapacitor with ultrahigh energy density," Energy, Elsevier, vol. 123(C), pages 296-304.
    9. Sieben, J.M. & Morallón, E. & Cazorla-Amorós, D., 2013. "Flexible ruthenium oxide-activated carbon cloth composites prepared by simple electrodeposition methods," Energy, Elsevier, vol. 58(C), pages 519-526.
    10. Ghosh, Sampad & Withanage, Sajeevi S. & Chamlagain, Bhim & Khondaker, Saiful I. & Harish, Sivasankaran & Saha, Bidyut Baran, 2020. "Low pressure sulfurization and characterization of multilayer MoS2 for potential applications in supercapacitors," Energy, Elsevier, vol. 203(C).
    11. Wang, Hongqiang & Li, Sha & Li, Dan & Chen, Zhixin & Liu, Hua Kun & Guo, Zaiping, 2014. "TiO2 coated three-dimensional hierarchically ordered porous sulfur electrode for the lithium/sulfur rechargeable batteries," Energy, Elsevier, vol. 75(C), pages 597-602.
    12. Yang, Zunxian & Meng, Qing & Yan, Wenhuan & Lv, Jun & Guo, Zaiping & Yu, Xuebin & Chen, Zhixin & Guo, Tailiang & Zeng, Rong, 2015. "Novel three-dimensional tin/carbon hybrid core/shell architecture with large amount of solid cross-linked micro/nanochannels for lithium ion battery application," Energy, Elsevier, vol. 82(C), pages 960-967.
    13. Li, Zijiong & Liu, Ping & Yun, Gaoqian & Shi, Kai & Lv, Xiaowei & Li, Kun & Xing, Jianhua & Yang, Baocheng, 2014. "3D (Three-dimensional) sandwich-structured of ZnO (zinc oxide)/rGO (reduced graphene oxide)/ZnO for high performance supercapacitors," Energy, Elsevier, vol. 69(C), pages 266-271.
    14. Miao, Fujun & Shao, Changlu & Li, Xinghua & Lu, Na & Wang, Kexin & Zhang, Xin & Liu, Yichun, 2016. "Polyaniline-coated electrospun carbon nanofibers with high mass loading and enhanced capacitive performance as freestanding electrodes for flexible solid-state supercapacitors," Energy, Elsevier, vol. 95(C), pages 233-241.
    15. Cauda, Valentina & Pugliese, Diego & Garino, Nadia & Sacco, Adriano & Bianco, Stefano & Bella, Federico & Lamberti, Andrea & Gerbaldi, Claudio, 2014. "Multi-functional energy conversion and storage electrodes using flower-like Zinc oxide nanostructures," Energy, Elsevier, vol. 65(C), pages 639-646.
    16. Yanik, Mahir Ozan & Yigit, Ekrem Akif & Akansu, Yahya Erkan & Sahmetlioglu, Ertugrul, 2017. "Magnetic conductive polymer-graphene nanocomposites based supercapacitors for energy storage," Energy, Elsevier, vol. 138(C), pages 883-889.
    17. Park, Seung-Keun & Seong, Chae-Yong & Yoo, Suyeon & Piao, Yuanzhe, 2016. "Porous Mn3O4 nanorod/reduced graphene oxide hybrid paper as a flexible and binder-free anode material for lithium ion battery," Energy, Elsevier, vol. 99(C), pages 266-273.
    18. Jiang, Zhibin & Chen, Ling & Zhang, Wenguang & Chen, Shiyu & Jian, Xiying & Liu, Xiang & Chen, Hongyu & Guo, Chunlei & Li, Weishan, 2021. "Sandwich-like NOCC@S8/rGO composite as cathode for high energy lithium-sulfur batteries," Energy, Elsevier, vol. 220(C).
    19. Cui, Yingzhi & Zuo, Pengjian & Du, Chunyu & Gao, Yunzhi & Yang, Jie & Cheng, Xinqun & Ma, Yulin & Yin, Geping, 2018. "State of health diagnosis model for lithium ion batteries based on real-time impedance and open circuit voltage parameters identification method," Energy, Elsevier, vol. 144(C), pages 647-656.
    20. Tamilarasan, P. & Ramaprabhu, S., 2013. "Graphene based all-solid-state supercapacitors with ionic liquid incorporated polyacrylonitrile electrolyte," Energy, Elsevier, vol. 51(C), pages 374-381.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:64:y:2014:i:c:p:234-241. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.