IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v60y2013icp109-115.html
   My bibliography  Save this article

Thermal analysis of a novel fibre-reinforced plastic solar hot water storage tank

Author

Listed:
  • Nwosu, P.N.
  • Agbiogwu, D.

Abstract

A fibre-reinforced plastic (FRP) hot water storage tank was developed in the present study. The main object for the development of the tank was to provide a long term storage unit that can efficiently retain and deliver stored hot water from solar collectors, and several other sources of hydrothermal fluids. A specific object was to use low-cost materials which can be easily moulded into a variety of shapes without requiring highly specialized industrial processes, as well as reduce the weight of the tank while making it withstand pressures substantially above the ambient. Results confirmed a superior storage performance over time with minimal losses. A thermal analysis was performed which showed that ambient and geometric parameters as well as the tank insulation material properties can significantly impact the storage performance.

Suggested Citation

  • Nwosu, P.N. & Agbiogwu, D., 2013. "Thermal analysis of a novel fibre-reinforced plastic solar hot water storage tank," Energy, Elsevier, vol. 60(C), pages 109-115.
    • Handle: RePEc:eee:energy:v:60:y:2013:i:c:p:109-115
    DOI: 10.1016/j.energy.2013.07.002
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544213005756
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.07.002?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Z.F & Sumathy, K, 2003. "A computational study on the performance of a solar air-conditioning system with a partitioned storage tank," Energy, Elsevier, vol. 28(15), pages 1683-1686.
    2. Rodríguez-Hidalgo, M.C. & Rodríguez-Aumente, P.A. & Lecuona, A. & Legrand, M. & Ventas, R., 2012. "Domestic hot water consumption vs. solar thermal energy storage: The optimum size of the storage tank," Applied Energy, Elsevier, vol. 97(C), pages 897-906.
    3. Shariah, A.M. & Löf, G.O.G., 1996. "The optimization of tank-volume-to-collector-area ratio for a thermosyphon solar water heater," Renewable Energy, Elsevier, vol. 7(3), pages 289-300.
    4. Helwa, N. H. & Mobarak, A. M. & El-Sallak, M. S. & El-Ghetany, H. H., 1995. "Effect of hot-water consumption on temperature distribution in a horizontal solar water storage tank," Applied Energy, Elsevier, vol. 52(2-3), pages 185-197.
    5. Garnier, C. & Currie, J. & Muneer, T., 2009. "Integrated collector storage solar water heater: Temperature stratification," Applied Energy, Elsevier, vol. 86(9), pages 1465-1469, September.
    6. Lima, Juliana Benoni Arruda & Prado, Racine T.A. & Montoro Taborianski, Vanessa, 2006. "Optimization of tank and flat-plate collector of solar water heating system for single-family households to assure economic efficiency through the TRNSYS program," Renewable Energy, Elsevier, vol. 31(10), pages 1581-1595.
    7. Kalogirou, Soteris A & Papamarcou, Christos, 2000. "Modelling of a thermosyphon solar water heating system and simple model validation," Renewable Energy, Elsevier, vol. 21(3), pages 471-493.
    8. Inalli, M., 1998. "Design parameters for a solar heating system with an underground cylindrical tank," Energy, Elsevier, vol. 23(12), pages 1015-1027.
    9. Herrmann, Ulf & Kelly, Bruce & Price, Henry, 2004. "Two-tank molten salt storage for parabolic trough solar power plants," Energy, Elsevier, vol. 29(5), pages 883-893.
    10. Shariah, Adnan & Shalabi, Bassam, 1997. "Optimal design for a thermosyphon solar water heater," Renewable Energy, Elsevier, vol. 11(3), pages 351-361.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shen, Yongliang & Liu, Shuli & Mazhar, Abdur Rehman & Han, Xiaojing & Yang, Liu & Yang, Xiu'e, 2021. "A review of solar-driven short-term low temperature heat storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    2. Kumar, G. Senthil & Nagarajan, D. & Chidambaram, L.A. & Kumaresan, V. & Ding, Y. & Velraj, R., 2016. "Role of PCM addition on stratification behaviour in a thermal storage tank – An experimental study," Energy, Elsevier, vol. 115(P1), pages 1168-1178.
    3. Armstrong, P. & Ager, D. & Thompson, I. & McCulloch, M., 2014. "Improving the energy storage capability of hot water tanks through wall material specification," Energy, Elsevier, vol. 78(C), pages 128-140.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kim, Jimin & Hong, Taehoon & Jeong, Jaemin & Lee, Myeonghwi & Koo, Choongwan & Lee, Minhyun & Ji, Changyoon & Jeong, Jaewook, 2016. "An integrated multi-objective optimization model for determining the optimal solution in the solar thermal energy system," Energy, Elsevier, vol. 102(C), pages 416-426.
    2. Chuawittayawuth, K. & Kumar, S., 2002. "Experimental investigation of temperature and flow distribution in a thermosyphon solar water heating system," Renewable Energy, Elsevier, vol. 26(3), pages 431-448.
    3. Li, Jiarong & Li, Xiangdong & Wang, Yong & Tu, Jiyuan, 2021. "Long-term performance of a solar water heating system with a novel variable-volume tank," Renewable Energy, Elsevier, vol. 164(C), pages 230-241.
    4. Shrivastava, R.L. & Vinod Kumar, & Untawale, S.P., 2017. "Modeling and simulation of solar water heater: A TRNSYS perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 126-143.
    5. Erdemir, Dogan & Atesoglu, Hakan & Altuntop, Necdet, 2019. "Experimental investigation on enhancement of thermal performance with obstacle placing in the horizontal hot water tank used in solar domestic hot water system," Renewable Energy, Elsevier, vol. 138(C), pages 187-197.
    6. Al-Habaibeh, Amin & Shakmak, Bubaker & Fanshawe, Simon, 2018. "Assessment of a novel technology for a stratified hot water energy storage – The water snake," Applied Energy, Elsevier, vol. 222(C), pages 189-198.
    7. Qiu, Guodong & Yu, Shipeng & Cai, Weihua, 2021. "A novel heating strategy and its optimization of a solar heating system for a commercial building in term of economy," Energy, Elsevier, vol. 221(C).
    8. Myeong Jin Ko, 2015. "Multi-Objective Optimization Design for Indirect Forced-Circulation Solar Water Heating System Using NSGA-II," Energies, MDPI, vol. 8(11), pages 1-25, November.
    9. Shariah, Adnan & Al-Akhras, M-Ali & Al-Omari, I.A., 2002. "Optimizing the tilt angle of solar collectors," Renewable Energy, Elsevier, vol. 26(4), pages 587-598.
    10. Naspolini, Helena F. & Rüther, Ricardo, 2012. "Assessing the technical and economic viability of low-cost domestic solar hot water systems (DSHWS) in low-income residential dwellings in Brazil," Renewable Energy, Elsevier, vol. 48(C), pages 92-99.
    11. Figaj, Rafał & Żołądek, Maciej, 2021. "Experimental and numerical analysis of hybrid solar heating and cooling system for a residential user," Renewable Energy, Elsevier, vol. 172(C), pages 955-967.
    12. Li, Xiaolei & Xu, Ershu & Song, Shuang & Wang, Xiangyan & Yuan, Guofeng, 2017. "Dynamic simulation of two-tank indirect thermal energy storage system with molten salt," Renewable Energy, Elsevier, vol. 113(C), pages 1311-1319.
    13. Desideri, Umberto & Campana, Pietro Elia, 2014. "Analysis and comparison between a concentrating solar and a photovoltaic power plant," Applied Energy, Elsevier, vol. 113(C), pages 422-433.
    14. Backhaus, Klaus & Gausling, Philipp & Hildebrand, Luise, 2015. "Comparing the incomparable: Lessons to be learned from models evaluating the feasibility of Desertec," Energy, Elsevier, vol. 82(C), pages 905-913.
    15. Gunjo, Dawit Gudeta & Jena, Smruti Ranjan & Mahanta, Pinakeswar & Robi, P.S., 2018. "Melting enhancement of a latent heat storage with dispersed Cu, CuO and Al2O3 nanoparticles for solar thermal application," Renewable Energy, Elsevier, vol. 121(C), pages 652-665.
    16. Gunjo, Dawit Gudeta & Mahanta, Pinakeswar & Robi, Puthuveettil Sreedharan, 2017. "Exergy and energy analysis of a novel type solar collector under steady state condition: Experimental and CFD analysis," Renewable Energy, Elsevier, vol. 114(PB), pages 655-669.
    17. Azzolin, Marco & Mariani, Andrea & Moro, Lorenzo & Tolotto, Andrea & Toninelli, Paolo & Del Col, Davide, 2018. "Mathematical model of a thermosyphon integrated storage solar collector," Renewable Energy, Elsevier, vol. 128(PA), pages 400-415.
    18. Mostafavi Tehrani, S. Saeed & Shoraka, Yashar & Nithyanandam, Karthik & Taylor, Robert A., 2019. "Shell-and-tube or packed bed thermal energy storage systems integrated with a concentrated solar power: A techno-economic comparison of sensible and latent heat systems," Applied Energy, Elsevier, vol. 238(C), pages 887-910.
    19. Baeten, Brecht & Confrey, Thomas & Pecceu, Sébastien & Rogiers, Frederik & Helsen, Lieve, 2016. "A validated model for mixing and buoyancy in stratified hot water storage tanks for use in building energy simulations," Applied Energy, Elsevier, vol. 172(C), pages 217-229.
    20. Zaversky, Fritz & Sánchez, Marcelino & Astrain, David, 2014. "Object-oriented modeling for the transient response simulation of multi-pass shell-and-tube heat exchangers as applied in active indirect thermal energy storage systems for concentrated solar power," Energy, Elsevier, vol. 65(C), pages 647-664.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:60:y:2013:i:c:p:109-115. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.