IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v322y2025ics0360544225012423.html
   My bibliography  Save this article

Efficient waste heat management using hybrid thermoelectric systems with phase change material and porous foam for sustainable energy conversion

Author

Listed:
  • Asadi, Mahdi
  • Mohammadiun, Mohammad
  • Dibaei Bonab, Mohammad Hossein
  • Mohammadiun, Hamid
  • Yousefi, Esmaeil

Abstract

The process of managing waste heat from various thermal sources shows promising outcomes in the field of energy conversion. Thermoelectric generators integrated with phase change materials containing porous foams are valuable means for converting waste heat into electricity. Installing these systems on common heat sources and implementing an effective strategy for managing waste heat fills a major gap in current research in this area. The goal of this study is to utilize a novel prototype hybrid configuration to manage waste heat from an industrial chimney for the first time. ten thermoelectric modules equipped with phase change material and copper foam were installed on the chimney body, serving as an energy storage unit on the hot-side of the module and as a heat sink on the cold-side. Therefore, continuous and fluctuating heat loads were imposed to the chimney initiating from ambient temperature. The findings of this study indicate that the proposed system was effectively powered by the waste heat from the chimney body. The phase change material on the hot-side prevented overheating and stabilized the cold-side's temperature, acting as a heat sink without using electrical energy. This created a sufficient temperature difference, enabling the system to generate voltage for an extended period. The system produced maximum output voltages of 3900 mV and 6100 mV under constant loads of 75 W and 125 W, respectively. Under fluctuating loads of 150 W and 200 W, it maintained effective performance with maximum output voltages of 4700 mV and 5300 mV. The hybrid case described offers an innovative approach to managing waste heat in industrial settings, resulting in enhanced cost savings.

Suggested Citation

  • Asadi, Mahdi & Mohammadiun, Mohammad & Dibaei Bonab, Mohammad Hossein & Mohammadiun, Hamid & Yousefi, Esmaeil, 2025. "Efficient waste heat management using hybrid thermoelectric systems with phase change material and porous foam for sustainable energy conversion," Energy, Elsevier, vol. 322(C).
  • Handle: RePEc:eee:energy:v:322:y:2025:i:c:s0360544225012423
    DOI: 10.1016/j.energy.2025.135600
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225012423
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2025.135600?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Yousefi, Esmaeil & Nejad, Ali Abbas & Rezania, Alireza, 2022. "Higher power output in thermoelectric generator integrated with phase change material and metal foams under transient boundary condition," Energy, Elsevier, vol. 256(C).
    2. Wang, Jun & Song, Xiangxiang & Ni, Qiqiang & Li, Xingjun & Meng, Qingtian, 2021. "Experimental investigation on the influence of phase change material on the output performance of thermoelectric generator," Renewable Energy, Elsevier, vol. 177(C), pages 884-894.
    3. Borhani, S.M. & Hosseini, M.J. & Pakrouh, R. & Ranjbar, A.A. & Nourian, A., 2021. "Performance enhancement of a thermoelectric harvester with a PCM/Metal foam composite," Renewable Energy, Elsevier, vol. 168(C), pages 1122-1140.
    4. Meng, Jing-Hui & Gao, De-Yang & Liu, Yan & Zhang, Kai & Lu, Gui, 2022. "Heat transfer mechanism and structure design of phase change materials to improve thermoelectric device performance," Energy, Elsevier, vol. 245(C).
    5. Madruga, Santiago, 2021. "Modeling of enhanced micro-energy harvesting of thermal ambient fluctuations with metallic foams embedded in Phase Change Materials," Renewable Energy, Elsevier, vol. 168(C), pages 424-437.
    6. Mohammadnia, Ali & Ziapour, Behrooz M. & Sedaghati, Farzad & Rosendahl, Lasse & Rezania, Alireza, 2021. "Fan operating condition effect on performance of self- cooling thermoelectric generator system," Energy, Elsevier, vol. 224(C).
    7. Atouei, S. Ahmadi & Rezania, A. & Ranjbar, A.A. & Rosendahl, L.A., 2018. "Protection and thermal management of thermoelectric generator system using phase change materials: An experimental investigation," Energy, Elsevier, vol. 156(C), pages 311-318.
    8. Luo, Ding & Liu, Zerui & Cao, Jin & Yan, Yuying & Cao, Bingyang, 2024. "Performance investigation and optimization of an L-type thermoelectric generator," Energy, Elsevier, vol. 307(C).
    9. Oswaldo Hideo Ando Junior & Eder Andrade da Silva & Emerson Rodrigues de Lira & Sergio Vladimir Barreiro Degiorgi & João Paulo Pereira do Carmo, 2024. "Comparative Analysis and Integrated Methodology for the Electrical Design and Performance Evaluation of Thermoelectric Generators (TEGs) in Energy Harvesting Applications," Energies, MDPI, vol. 17(20), pages 1-23, October.
    10. Yousefi, Esmaeil & Kayhani, Mohammad Hassan & Abbas Nejad, Ali & Nikkhoo, Amirfarhang, 2024. "Experimental investigation of the external load effect on thermoelectric generator discharge time in a low power energy harvesting system," Energy, Elsevier, vol. 293(C).
    11. Zhe Zhang & Yuqi Zhang & Xiaomei Sui & Wenbin Li & Daochun Xu, 2020. "Performance of Thermoelectric Power-Generation System for Sufficient Recovery and Reuse of Heat Accumulated at Cold Side of TEG with Water-Cooling Energy Exchange Circuit," Energies, MDPI, vol. 13(21), pages 1-18, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yousefi, Esmaeil & Nejad, Ali Abbas & Rezania, Alireza, 2022. "Higher power output in thermoelectric generator integrated with phase change material and metal foams under transient boundary condition," Energy, Elsevier, vol. 256(C).
    2. Yousefi, Esmaeil & Kayhani, Mohammad Hassan & Abbas Nejad, Ali & Nikkhoo, Amirfarhang, 2024. "Experimental investigation of the external load effect on thermoelectric generator discharge time in a low power energy harvesting system," Energy, Elsevier, vol. 293(C).
    3. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ren, Fengsheng & Yang, Yue & Ma, Bijian & Zhu, Yonggang, 2023. "Performance optimization for a novel two-stage thermoelectric generator with different PCMs embedding modes," Energy, Elsevier, vol. 281(C).
    4. Hong, Bing-Hua & Huang, Xiao-Yan & He, Jian-Wei & Cai, Yang & Wang, Wei-Wei & Zhao, Fu-Yun, 2023. "Round-the-clock performance of solar thermoelectric wall with phase change material in subtropical climate: Critical analysis and parametric investigations," Energy, Elsevier, vol. 272(C).
    5. Huang, Xiao-Yan & Zhou, Ze-Yu & Shu, Zheng-Yu & Cai, Yang & Lv, You & Wang, Wei-Wei & Zhao, Fu-Yun, 2024. "A phase change material based annular thermoelectric energy harvester from ambient temperature fluctuations: Transient modeling and critical characteristics," Renewable Energy, Elsevier, vol. 222(C).
    6. Luo, Yang & Li, Linlin & Chen, Yiping & Kim, Chang Nyung, 2022. "Influence of geometric parameter and contact resistances on the thermal-electric behavior of a segmented TEG," Energy, Elsevier, vol. 254(PC).
    7. Meng, Jing-Hui & Gao, De-Yang & Liu, Yan & Zhang, Kai & Lu, Gui, 2022. "Heat transfer mechanism and structure design of phase change materials to improve thermoelectric device performance," Energy, Elsevier, vol. 245(C).
    8. Yang, Wenlong & Zhu, WenChao & Du, Banghua & Wang, Han & Xu, Lamei & Xie, Changjun & Shi, Ying, 2023. "Power generation of annular thermoelectric generator with silicone polymer thermal conductive oil applied in automotive waste heat recovery," Energy, Elsevier, vol. 282(C).
    9. Huaibin Gao & Xiaojiang Liu & Chuanwei Zhang & Yu Ma & Hongjun Li & Guanghong Huang, 2023. "Design and Experimental Investigation of a Self-Powered Fan Based on a Thermoelectric System," Energies, MDPI, vol. 16(2), pages 1-12, January.
    10. Joung, Jaewon & Kang, Yong-Kwon & Nam, Yujin & Jeong, Jae-Weon, 2024. "Analysis of power generation considering design and finishing materials of thermoelectric energy harvesting blocks," Renewable Energy, Elsevier, vol. 231(C).
    11. Wang, Jun & Song, Xiangxiang & Ni, Qiqiang & Li, Xingjun & Meng, Qingtian, 2021. "Experimental investigation on the influence of phase change material on the output performance of thermoelectric generator," Renewable Energy, Elsevier, vol. 177(C), pages 884-894.
    12. Peng, Hao & Guo, Wenhua & Feng, Shiyu & Shen, Yijun, 2022. "A novel thermoelectric energy harvester using gallium as phase change material for spacecraft power application," Applied Energy, Elsevier, vol. 322(C).
    13. Joung, Jaewon & Cheon, Seong-Yong & Kang, Yong-Kwon & Kim, Minseong & Park, Junseok & Jeong, Jae-Weon, 2023. "Impact of external electric resistance on the power generation in the thermoelectric energy harvesting blocks," Renewable Energy, Elsevier, vol. 212(C), pages 779-791.
    14. Wang, Xue & Zong, Yujie & Su, Wenbin & Wang, Chunlei & Wang, Hongchao, 2024. "Output and mechanical performance of thermoelectric generator under transient heat loads," Renewable Energy, Elsevier, vol. 222(C).
    15. Wang, Yilin & Cheng, Kunlin & Dang, Chaolei & Wang, Cong & Qin, Jiang & Huang, Hongyan, 2023. "Performance and experimental investigation for a novel heat storage based thermoelectric harvester for hypersonic vehicles," Energy, Elsevier, vol. 263(PD).
    16. Abdul Ghani Olabi & Tabbi Wilberforce & Mohammad Ali Abdelkareem & Mohamad Ramadan, 2021. "Critical Review of Flywheel Energy Storage System," Energies, MDPI, vol. 14(8), pages 1-33, April.
    17. Kashif Irshad, 2021. "Performance Improvement of Thermoelectric Air Cooler System by Using Variable-Pulse Current for Building Applications," Sustainability, MDPI, vol. 13(17), pages 1-13, August.
    18. Wang, Ji-Xiang & Qian, Jian & Wang, Ni & Zhang, He & Cao, Xiang & Liu, Feifan & Hao, Guanqiu, 2023. "A scalable micro-encapsulated phase change material and liquid metal integrated composite for sustainable data center cooling," Renewable Energy, Elsevier, vol. 213(C), pages 75-85.
    19. Mohamed Sabry & Abdelrahman Lashin, 2023. "Performance of a Heat-Pipe Cooled Concentrated Photovoltaic/Thermoelectric Hybrid System," Energies, MDPI, vol. 16(3), pages 1-13, February.
    20. Zhaochun Shi & Guohua Wang & Chunli Liu & Qiang Lv & Baoli Gong & Yingchao Zhang & Yuying Yan, 2023. "Optimizing the Transient Performance of Thermoelectric Generator with PCM by Taguchi Method," Energies, MDPI, vol. 16(2), pages 1-16, January.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:322:y:2025:i:c:s0360544225012423. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.