IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v320y2025ics0360544225009764.html
   My bibliography  Save this article

A review of refrigerant-based vortex tube separation characteristics: Devices, thermodynamic cycles and system experiments

Author

Listed:
  • Jing, Dongliang
  • Yan, Gang
  • Li, Yinlong
  • Xiong, Tong
  • Liu, Guoqiang

Abstract

Vortex tube is a device with energy self-separation and no moving parts. The existing studies mainly focused on the energy separation mechanism of vortex tube with air as the working fluid. The environmental impact of refrigerants needs to be considered when integrating vortex tube into refrigeration systems. Closed systems complicate the separation environment. Refrigerants, as non-ideal gases, may undergo phase change during energy separation in vortex tube, and the generated two-phase flow may lead to a deterioration or loss of energy separation. The separation characteristics of refrigerant as working fluid and its application in refrigeration systems are challenging and have not been systematically summarized. Therefore, this review innovatively analyzes the separation characteristics of refrigerant-based vortex tube (RBVT) from three aspects: devices, thermodynamic cycles and system experiments. The analysis indicated that RBVT can enhance the coefficient of performance (COP) of theoretical cycles when used as a throttling, cooling or separating device. Moreover, the optimal separation characteristics of RBVT in system require a deeper understanding of refrigerant behavior, vortex tube optimization mechanism, cycle construction and matching between components. This review completes the research progress of vortex tube at cryogenic temperature and provides a reference and future research directions for integrating vortex tube into refrigeration systems.

Suggested Citation

  • Jing, Dongliang & Yan, Gang & Li, Yinlong & Xiong, Tong & Liu, Guoqiang, 2025. "A review of refrigerant-based vortex tube separation characteristics: Devices, thermodynamic cycles and system experiments," Energy, Elsevier, vol. 320(C).
    • Handle: RePEc:eee:energy:v:320:y:2025:i:c:s0360544225009764
    DOI: 10.1016/j.energy.2025.135334
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225009764
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2025.135334?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Eiamsa-ard, Smith & Promvonge, Pongjet, 2008. "Review of Ranque-Hilsch effects in vortex tubes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(7), pages 1822-1842, September.
    2. Thakare, Hitesh R. & Parekh, A.D., 2015. "Computational analysis of energy separation in counter—flow vortex tube," Energy, Elsevier, vol. 85(C), pages 62-77.
    3. Li, Yinlong & Yan, Gang & Yang, Yuqing & Dong, Peiwen & Liu, Guoqiang, 2024. "Thermodynamic analysis of new configurations of auto-cascade refrigeration cycles integrating the vortex tube," Energy, Elsevier, vol. 308(C).
    4. Zhang, Bo & Guo, Xiangji, 2018. "Prospective applications of Ranque–Hilsch vortex tubes to sustainable energy utilization and energy efficiency improvement with energy and mass separation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 135-150.
    5. Aydın, Orhan & Baki, Muzaffer, 2006. "An experimental study on the design parameters of a counterflow vortex tube," Energy, Elsevier, vol. 31(14), pages 2763-2772.
    6. Thakare, Hitesh R. & Monde, Aniket & Parekh, Ashok D., 2015. "Experimental, computational and optimization studies of temperature separation and flow physics of vortex tube: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 1043-1071.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Bo & Guo, Xiangji, 2018. "Prospective applications of Ranque–Hilsch vortex tubes to sustainable energy utilization and energy efficiency improvement with energy and mass separation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 135-150.
    2. Zhang, Bo & Guo, Yaning & Li, Nian & He, Peng & Guo, Xiangji, 2023. "Experimental study of gas–liquid behavior in three-flow vortex tube with sintered metal porous material as the drain part," Energy, Elsevier, vol. 263(PA).
    3. Awan, O.A.A. & Sager, R. & Petersen, N.H. & Wirsum, M. & Juntasaro, E., 2025. "Flow phenomena inside the Ranque-Hilsch vortex tube: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 211(C).
    4. Oberti, Raphaël & Lagrandeur, Junior & Poncet, Sébastien, 2023. "Numerical benchmark of a Ranque–Hilsch vortex tube working with subcritical carbon dioxide," Energy, Elsevier, vol. 263(PC).
    5. Ambedkar, P. & Dutta, T., 2023. "CFD simulation and thermodynamic analysis of energy separation in vortex tube using different inert gases at different inlet pressures and cold mass fractions," Energy, Elsevier, vol. 263(PB).
    6. Farzaneh-Gord, Mahmood & Sadi, Meisam, 2014. "Improving vortex tube performance based on vortex generator design," Energy, Elsevier, vol. 72(C), pages 492-500.
    7. Manimaran, R., 2017. "Computational analysis of flow features and energy separation in a counter-flow vortex tube based on number of inlets," Energy, Elsevier, vol. 123(C), pages 564-578.
    8. Subudhi, Sudhakar & Sen, Mihir, 2015. "Review of Ranque–Hilsch vortex tube experiments using air," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 172-178.
    9. Manimaran, R., 2016. "Computational analysis of energy separation in a counter-flow vortex tube based on inlet shape and aspect ratio," Energy, Elsevier, vol. 107(C), pages 17-28.
    10. Konstantin I. Matveev & Jacob Leachman, 2021. "Numerical Simulations of Cryogenic Hydrogen Cooling in Vortex Tubes with Smooth Transitions," Energies, MDPI, vol. 14(5), pages 1-13, March.
    11. Yu, Binbin & Yang, Jingye & Wang, Dandong & Shi, Junye & Chen, Jiangping, 2019. "An updated review of recent advances on modified technologies in transcritical CO2 refrigeration cycle," Energy, Elsevier, vol. 189(C).
    12. Artem Belousov & Vladimir Lushpeev & Anton Sokolov & Radel Sultanbekov & Yan Tyan & Egor Ovchinnikov & Aleksei Shvets & Vitaliy Bushuev & Shamil Islamov, 2024. "Hartmann–Sprenger Energy Separation Effect for the Quasi-Isothermal Pressure Reduction of Natural Gas: Feasibility Analysis and Numerical Simulation," Energies, MDPI, vol. 17(9), pages 1-25, April.
    13. Jaime Guerrero & Antonio Alcaide-Moreno & Ana González-Espinosa & Roberto Arévalo & Lev Tunkel & María Dolores Storch de Gracia & Eduardo García-Rosales, 2023. "Reducing Energy Consumption and CO 2 Emissions in Natural Gas Preheating Stations Using Vortex Tubes," Energies, MDPI, vol. 16(13), pages 1-20, June.
    14. Rafiee, Seyed Ehsan & Rahimi, Masoud, 2013. "Experimental study and three-dimensional (3D) computational fluid dynamics (CFD) analysis on the effect of the convergence ratio, pressure inlet and number of nozzle intake on vortex tube performance–," Energy, Elsevier, vol. 63(C), pages 195-204.
    15. Rogovyi, A., 2018. "Energy performances of the vortex chamber supercharger," Energy, Elsevier, vol. 163(C), pages 52-60.
    16. Shahsavar, Amin & Jahangiri, Ali & Qatarani nejad, Amir & Ahmadi, Gholamreza & Karamzadeh dizaji, Alireza, 2022. "Energy and exergy analysis and multi-objective optimization of using combined vortex tube-photovoltaic/thermal system in city gate stations," Renewable Energy, Elsevier, vol. 196(C), pages 1017-1028.
    17. Thakare, Hitesh R. & Parekh, A.D., 2015. "Computational analysis of energy separation in counter—flow vortex tube," Energy, Elsevier, vol. 85(C), pages 62-77.
    18. Li, Yinlong & Yan, Gang & Jing, Dongliang & Liu, Guoqiang & Llopis, Rodrigo, 2025. "A novel online measurement method for compositions and energy performance of an auto-cascade refrigeration system," Energy, Elsevier, vol. 318(C).
    19. Im, S.Y. & Yu, S.S., 2012. "Effects of geometric parameters on the separated air flow temperature of a vortex tube for design optimization," Energy, Elsevier, vol. 37(1), pages 154-160.
    20. Kandil, Hamdy A. & Abdelghany, Seif T., 2015. "Computational investigation of different effects on the performance of the Ranque–Hilsch vortex tube," Energy, Elsevier, vol. 84(C), pages 207-218.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:320:y:2025:i:c:s0360544225009764. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.