IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v319y2025ics0360544225005638.html
   My bibliography  Save this article

Study on the pyrolysis law of tires in a molten salt heating pyrolysis reactor: Experimental and CFD-DEM simulation

Author

Listed:
  • Qi, Jingwei
  • Zheng, Runjia
  • Wang, Yijie
  • Huhe, Taoli
  • Ling, Xiang
  • Yuan, Haoran
  • Chen, Yong

Abstract

Tire pyrolysis is an important method for the resource utilization of waste tires, and the heat and mass transfer characteristics of the reactor significantly affect the quality of the pyrolysis products. Current studies mainly focus on using air as the heat transfer medium for tire pyrolysis reactors. However, molten salt has better energy storage and heat transfer properties compared to air, yet research on using molten salt as a heat transfer medium for tire pyrolysis is still lacking. In this study, molten salt is innovatively used as the heat transfer medium, and the pyrolysis characteristics of tires are investigated based on a molten salt-heated tire pyrolysis reactor. A corresponding CFD-DEM method is developed to study the heat and mass transfer characteristics of tire particles during the pyrolysis process within the reactor. The results indicate that the proportion of single-ring aromatics in the pyrolysis oil exceeds 30%. The simulation results show that at a pyrolysis temperature of 500 °C, the average heating rate of the tire particles is approximately 0.4–0.6 K/s during the first 100 s. As the pyrolysis reaction progresses, the heating rate of the tire particles gradually decreases, and then starts to increase to 0.41 K/s after 400 s.

Suggested Citation

  • Qi, Jingwei & Zheng, Runjia & Wang, Yijie & Huhe, Taoli & Ling, Xiang & Yuan, Haoran & Chen, Yong, 2025. "Study on the pyrolysis law of tires in a molten salt heating pyrolysis reactor: Experimental and CFD-DEM simulation," Energy, Elsevier, vol. 319(C).
  • Handle: RePEc:eee:energy:v:319:y:2025:i:c:s0360544225005638
    DOI: 10.1016/j.energy.2025.134921
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225005638
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2025.134921?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Shi, Xiaogang & Ronsse, Frederik & Roegiers, Jelle & Pieters, Jan G., 2019. "3D Eulerian-Eulerian modeling of a screw reactor for biomass thermochemical conversion. Part 1: Solids flow dynamics and back-mixing," Renewable Energy, Elsevier, vol. 143(C), pages 1465-1476.
    2. Zhang, Menghui & Qi, Yongfeng & Zhang, Wan & Wang, Meiting & Li, Jingyi & Lu, Yi & Zhang, Sheng & He, Jiazheng & Cao, Hao & Tao, Xuan & Xu, Hanlu & Zhang, Sheng, 2024. "A review on waste tires pyrolysis for energy and material recovery from the optimization perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    3. Babler, Matthaus U. & Phounglamcheik, Aekjuthon & Amovic, Marko & Ljunggren, Rolf & Engvall, Klas, 2017. "Modeling and pilot plant runs of slow biomass pyrolysis in a rotary kiln," Applied Energy, Elsevier, vol. 207(C), pages 123-133.
    4. Shi, Xiaogang & Ronsse, Frederik & Nachenius, Robert & Pieters, Jan G., 2019. "3D Eulerian-Eulerian modeling of a screw reactor for biomass thermochemical conversion. Part 2: Slow pyrolysis for char production," Renewable Energy, Elsevier, vol. 143(C), pages 1477-1487.
    5. Khodaei, H. & Álvarez-Bermúdez, C. & Chapela, S. & Olson, C. & MacKenzie, M.D. & Gómez, M.A. & Porteiro, J., 2024. "Eulerian CFD simulation of biomass thermal conversion in an indirect slow pyrolysis rotary kiln unit to produce biochar from recycled waste wood," Energy, Elsevier, vol. 288(C).
    6. Czajczyńska, Dina & Krzyżyńska, Renata & Jouhara, Hussam & Spencer, Nik, 2017. "Use of pyrolytic gas from waste tire as a fuel: A review," Energy, Elsevier, vol. 134(C), pages 1121-1131.
    7. Miranda, Miguel & Cabrita, I. & Pinto, Filomena & Gulyurtlu, I., 2013. "Mixtures of rubber tyre and plastic wastes pyrolysis: A kinetic study," Energy, Elsevier, vol. 58(C), pages 270-282.
    8. Dai, Xianwen & Yin, Xiuli & Wu, Chuangzhi & Zhang, Wennan & Chen, Yong, 2001. "Pyrolysis of waste tires in a circulating fluidized-bed reactor," Energy, Elsevier, vol. 26(4), pages 385-399.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Jingyuan & Zhou, Jianzhao & Ren, Jingzheng, 2025. "Recent advances of energetic valorization technologies for waste tires: A systematic review of thermochemical and integrated processes, challenges, and future directions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 218(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gunerhan, Ali & Altuntas, Onder & Caliskan, Hakan, 2025. "A case study of sustainable aviation fuel production from scrap tyres," Energy, Elsevier, vol. 327(C).
    2. Wang, Shoujun & Cheng, Mingqian & Xie, Ming & Yang, Yanyu & Liu, Tingting & Zhou, Tao & Cen, Qihong & Liu, Zewei & Li, Bin, 2025. "From waste to energy: Comprehensive understanding of the thermal-chemical utilization techniques for waste tire recycling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 211(C).
    3. Xu, Fanfan & Shao, Yihe & Zhang, Yanpeng & Zong, Peijie & Tian, Yuanyu & Wang, Jingxian & Qiao, Yingyun, 2025. "Parametric investigation of the effects on waste tire pyrolysis oil in a downdraft tube reactor," Energy, Elsevier, vol. 314(C).
    4. Stanisław Ledakowicz & Olexa Piddubniak, 2023. "Temperature Distribution in a Finite-Length Cylindrical Channel Filled with Biomass Transported by Electrically Heated Auger," Energies, MDPI, vol. 16(17), pages 1-23, August.
    5. Tao Chen & Xiaoke Ku & Jianzhong Lin & Henrik Ström, 2020. "CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme," Energies, MDPI, vol. 13(20), pages 1-19, October.
    6. Mohammad I. Jahirul & Farhad M. Hossain & Mohammad G. Rasul & Ashfaque Ahmed Chowdhury, 2021. "A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application," Energies, MDPI, vol. 14(13), pages 1-18, June.
    7. Bi, Rongshan & Zhang, Yan & Jiang, Xiao & Yang, Haixing & Yan, Kejia & Han, Min & Li, Wenhua & Zhong, Hua & Tan, Xinshun & Xia, Li & Sun, Xiaoyan & Xiang, Shuangguang, 2022. "Simulation and techno-economical analysis on the pyrolysis process of waste tire," Energy, Elsevier, vol. 260(C).
    8. Stanisław Ledakowicz & Olexa Piddubniak, 2022. "The Non-Stationary Heat Transport inside a Shafted Screw Conveyor Filled with Homogeneous Biomass Heated Electrically," Energies, MDPI, vol. 15(17), pages 1-16, August.
    9. Sharma, Abhishek & Murugan, S., 2017. "Effect of nozzle opening pressure on the behaviour of a diesel engine running with non-petroleum fuel," Energy, Elsevier, vol. 127(C), pages 236-246.
    10. Rezapour, Mojtaba & Gholizadeh, Mohammad, 2021. "Analysis of methanol thermochemical reactor with volumetric solar heat flux based on Parabolic Trough Concentrator," Renewable Energy, Elsevier, vol. 180(C), pages 1088-1100.
    11. Arabiourrutia, Miriam & Lopez, Gartzen & Artetxe, Maite & Alvarez, Jon & Bilbao, Javier & Olazar, Martin, 2020. "Waste tyre valorization by catalytic pyrolysis – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 129(C).
    12. Thoharudin, & Hsiau, Shu-San & Chen, Yi-Shun & Yang, Shouyin, 2022. "Numerical modeling of biomass fast pyrolysis by using an improved comprehensive reaction scheme for energy analysis," Renewable Energy, Elsevier, vol. 181(C), pages 355-364.
    13. Miranda, Miguel & Cabrita, I. & Pinto, Filomena & Gulyurtlu, I., 2013. "Mixtures of rubber tyre and plastic wastes pyrolysis: A kinetic study," Energy, Elsevier, vol. 58(C), pages 270-282.
    14. Mikulski, Maciej & Ambrosewicz-Walacik, Marta & Duda, Kamil & Hunicz, Jacek, 2020. "Performance and emission characterization of a common-rail compression-ignition engine fuelled with ternary mixtures of rapeseed oil, pyrolytic oil and diesel," Renewable Energy, Elsevier, vol. 148(C), pages 739-755.
    15. Kunwar, Bidhya & Cheng, H.N. & Chandrashekaran, Sriram R & Sharma, Brajendra K, 2016. "Plastics to fuel: a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 421-428.
    16. Khodaei, Hassan & Gonzalez, Luis & Chapela, Sergio & Porteiro, Jacobo & Nikrityuk, Petr & Olson, Chris, 2021. "CFD-based coupled multiphase modeling of biochar production using a large-scale pyrolysis plant," Energy, Elsevier, vol. 217(C).
    17. Yin, Yanshan & Tu, Jun & Wu, Zhiliang & Wang, Tao & Rahman, Md. Maksudur & Shakir, Mohammad & Qing, Mengxia & Chen, Zhijie & Ni, Bing-Jie & Xuan, Yanni & Peng, Zeping & Liu, Liang, 2025. "Thermal characteristics, kinetics mechanism, and sulfur retention of waste tires and goat manure Co-combustion," Energy, Elsevier, vol. 325(C).
    18. Laghezza, Maddalena & Papari, Sadegh & Fiore, Silvia & Berruti, Franco, 2023. "Techno-economic assessment of the pyrolysis of rubber waste," Energy, Elsevier, vol. 278(PA).
    19. Zhang, Menghui & Qi, Yongfeng & Zhang, Wan & Wang, Meiting & Li, Jingyi & Lu, Yi & Zhang, Sheng & He, Jiazheng & Cao, Hao & Tao, Xuan & Xu, Hanlu & Zhang, Sheng, 2024. "A review on waste tires pyrolysis for energy and material recovery from the optimization perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 199(C).
    20. Serhiy Pyshyev & Bohdan Korchak & Denis Miroshnichenko & Volodimir Lebedev & Alla Yasinska & Yurii Lypko, 2025. "Obtaining New Materials from Liquid Pyrolysis Products of Used Tires for Waste Valorization," Sustainability, MDPI, vol. 17(9), pages 1-26, April.

    More about this item

    Keywords

    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:319:y:2025:i:c:s0360544225005638. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.