IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v270y2023ics0360544223003481.html
   My bibliography  Save this article

Catalytic pyrolysis of oil sludge using the nano alumina powder

Author

Listed:
  • Sajadi, Mahdi
  • Mokhtarani, Nader

Abstract

The primary purpose of this research is to recover fuel from oil sludge by thermal cracking and catalytic pyrolysis process. The effect of different parameters on the quality and quantity of the recovered liquid fuel was first discussed. A distillation range test was implemented to determine the optimum temperature range for the process. Gas chromatography-mass spectrometry analysis was employed to specify the distribution of hydrocarbons in the liquid phase. The best results were drawn at a temperature of 400 °C, a heating rate of 30 °C/min, and a detention time of 30 min. The specifications of the produced liquid fuel were consistent with the diesel cut. Then the effects of “oxidative desulfurization of oil sludge” and “adding Nano alumina powder (Nano-catalyst)” were investigated to increase the quality of the recovered liquid fuel. Although the use of Nano-catalysts positively affected the quality of the products, they slightly reduced the liquid oil yield. Ultimately, in optimal conditions, from each cubic meter of oil sludge, 550 L of diesel-like fuel with a heating value of 46,073 kJ/kg, and a density of 845 kg/m3, were produced. The sulfur content of the produced liquid fuel was also reduced by more than 94% compared to oil sludge.

Suggested Citation

  • Sajadi, Mahdi & Mokhtarani, Nader, 2023. "Catalytic pyrolysis of oil sludge using the nano alumina powder," Energy, Elsevier, vol. 270(C).
    • Handle: RePEc:eee:energy:v:270:y:2023:i:c:s0360544223003481
    DOI: 10.1016/j.energy.2023.126954
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223003481
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.126954?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tsiligiannis, Aristeides & Tsiliyannis, Christos, 2020. "Oil refinery sludge and renewable fuel blends as energy sources for the cement industry," Renewable Energy, Elsevier, vol. 157(C), pages 55-70.
    2. Cheng, Shuo & Wang, Yuhua & Fumitake, Takahashi & Kouji, Tokimatsu & Li, Aimin & Kunio, Yoshikawa, 2017. "Effect of steam and oil sludge ash additive on the products of oil sludge pyrolysis," Applied Energy, Elsevier, vol. 185(P1), pages 146-157.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hakimian, Hanie & Pyo, Sumin & Kim, Young-Min & Jae, Jungho & Show, Pau Loke & Rhee, Gwang Hoon & Chen, Wei-Hsin & Park, Young-Kwon, 2022. "Increased aromatics production by co-feeding waste oil sludge to the catalytic pyrolysis of cellulose," Energy, Elsevier, vol. 239(PD).
    2. Chen, Xiaoling & Zhang, Yongxing & Xu, Baoshen & Li, Yifan, 2022. "A simple model for estimation of higher heating value of oily sludge," Energy, Elsevier, vol. 239(PA).
    3. Liu, Huidong & Xu, Guoren & Li, Guibai, 2021. "Autocatalytic sludge pyrolysis by biochar derived from pharmaceutical sludge for biogas upgrading," Energy, Elsevier, vol. 229(C).
    4. Luo, Juan & Ma, Rui & Huang, Xiaofei & Sun, Shichang & Wang, Hao, 2020. "Bio-fuels generation and the heat conversion mechanisms in different microwave pyrolysis modes of sludge," Applied Energy, Elsevier, vol. 266(C).
    5. Sun, Yongqi & Chen, Jingjing & Zhang, Zuotai, 2019. "General roles of sludge ash, CaO and Al2O3 on the sludge pyrolysis toward clean utilizations," Applied Energy, Elsevier, vol. 233, pages 412-423.
    6. Quan, Hongping & Li, Pengfei & Duan, Wenmeng & Chen, Liao & Xing, Langman, 2019. "A series of methods for investigating the effect of a flow improver on the asphaltene and resin of crude oil," Energy, Elsevier, vol. 187(C).
    7. Liu, Zhongzhe & Hughes, Matthew & Tong, Yiran & Zhou, Jizhi & Kreutter, William & Valtierra, Danny & Singer, Simcha & Zitomer, Daniel & McNamara, Patrick, 2021. "Enhanced energy and resource recovery via synergistic catalytic pyrolysis of byproducts from thermal processing of wastewater solids," Renewable Energy, Elsevier, vol. 177(C), pages 475-481.
    8. Uyar, Mahmut & Aydın, Hüseyin, 2022. "Production of low sulfur diesel-like fuel from crude oil wastes by pyrolytic distillation and its usage in a diesel engine," Energy, Elsevier, vol. 244(PA).
    9. Cheng, Shuo & Zhang, Hongtao & Chang, Fengmin & Zhang, Feng & Wang, Kaijun & Qin, Ya & Huang, Tixiao, 2019. "Combustion behavior and thermochemical treatment scheme analysis of oil sludges and oil sludge semicokes," Energy, Elsevier, vol. 167(C), pages 575-587.
    10. Hongyuan Qi & Huayi Jiang & Yanzhen You & Juan Hu & Yulong Wang & Zhe Wu & Hongxin Qi, 2022. "Mechanism of Magnetic Nanoparticle Enhanced Microwave Pyrolysis for Oily Sludge," Energies, MDPI, vol. 15(4), pages 1-22, February.
    11. Zhang, Xitong & Xu, Jiayu & Ran, Shuai & Gao, Ying & Lyu, Yinong & Pan, Yueshen & Cao, Fei & Lin, Yunhao & Yang, Zixu & Wang, Zhongxian & Guo, Dandan & Wang, Qi & Zhu, Lin & Zhu, Yuezhao, 2022. "Experimental study on catalytic pyrolysis of oily sludge for H2 production under new nickel-ore-based catalysts," Energy, Elsevier, vol. 249(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:270:y:2023:i:c:s0360544223003481. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.