IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v245y2022ics0360544222001712.html
   My bibliography  Save this article

Pilot-scale combined pyrolysis and decoupling biomass gasification for energy and metal recovery from discarded printed circuit board and waste cable

Author

Listed:
  • Khaobang, Chanoknunt
  • Sarabhorn, Prysathryd
  • Siripaiboon, Chootrakul
  • Scala, Fabrizio
  • Areeprasert, Chinnathan

Abstract

This paper aims to the design innovation concept of e-waste pyrolysis and decoupling biomass gasification in pilot-scale for e-waste recycling and metal recovery. The syngas product and exhaust gas from decoupling gasification were injected to the pyrolysis burner for fuel reduction in sustaining the pyrolysis process. Results showed that the PCB (printed circuit board) and WC (waste cable) materials had pyrolysis oil yield of 20% and 27.3%, respectively, and pyrolysis char yield of 48% and 42%wt, respectively. Single ring compounds were the major compositions of the pyrolysis oil. The main composition of the synthesis gas product was 10.91%vol (H2), 23.4%vol (CO), and 5.68%vol (CH4). The methane content of the decoupling process was higher than that of conventional gasification. Precious metal content in the PCB char comprised Au, Ag, and Cu. Metal recovery from PCB char and ash via ultrasonication was 83.8–89.8%. The combined pyrolysis and decoupling gasification process offered a reduction in LPG (liquefied petroleum gas) consumption (36.1–41.7%), and high energy recovery from the pyrolysis products (53.4–81.6%). This could save the cost of e-waste recycling by about 25.7–28.7% compared to traditional pyrolysis. Therefore, the combined pyrolysis and decoupling gasification has a very good potential for e-waste conversion and metal recovery.

Suggested Citation

  • Khaobang, Chanoknunt & Sarabhorn, Prysathryd & Siripaiboon, Chootrakul & Scala, Fabrizio & Areeprasert, Chinnathan, 2022. "Pilot-scale combined pyrolysis and decoupling biomass gasification for energy and metal recovery from discarded printed circuit board and waste cable," Energy, Elsevier, vol. 245(C).
    • Handle: RePEc:eee:energy:v:245:y:2022:i:c:s0360544222001712
    DOI: 10.1016/j.energy.2022.123268
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222001712
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.123268?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Huaidong & Zhang, Shuhao & Li, Bin & Pan, De’an & Wu, Yufeng & Zuo, Tieyong, 2017. "Recovery of waste printed circuit boards through pyrometallurgical processing: A review," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 209-218.
    2. Chamseddine Guizani & Mejdi Jeguirim & Sylvie Valin & Lionel Limousy & Sylvain Salvador, 2017. "Biomass Chars: The Effects of Pyrolysis Conditions on Their Morphology, Structure, Chemical Properties and Reactivity," Energies, MDPI, vol. 10(6), pages 1-18, June.
    3. Xiao, Juan & Wang, Simin & Ye, Shupei & Dong, Jiayu & Wen, Jian & Zhang, Zaoxiao, 2020. "Thermo-economic optimization of gasification process with coal water slurry preheating technology," Energy, Elsevier, vol. 199(C).
    4. Gebreegziabher, Tesfaldet & Oyedun, Adetoyese Olajire & Hui, Chi Wai, 2013. "Optimum biomass drying for combustion – A modeling approach," Energy, Elsevier, vol. 53(C), pages 67-73.
    5. Kang, Hai-Yong & Schoenung, Julie M., 2005. "Electronic waste recycling: A review of U.S. infrastructure and technology options," Resources, Conservation & Recycling, Elsevier, vol. 45(4), pages 368-400.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xia Liu & Juntao Wei & Wei Huo & Guangsuo Yu, 2017. "Gasification under CO 2 –Steam Mixture: Kinetic Model Study Based on Shared Active Sites," Energies, MDPI, vol. 10(11), pages 1-10, November.
    2. Mallawarachchi, Harshani & Karunasena, Gayani, 2012. "Electronic and electrical waste management in Sri Lanka: Suggestions for national policy enhancements," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 44-53.
    3. Katrina N. Burns & Kan Sun & Julius N. Fobil & Richard L. Neitzel, 2016. "Heart Rate, Stress, and Occupational Noise Exposure among Electronic Waste Recycling Workers," IJERPH, MDPI, vol. 13(1), pages 1-16, January.
    4. Aziman, Eli Syafiqah & Ismail, Aznan Fazli & Rahmat, Muhammad Abdullah, 2023. "Balancing economic growth and environmental protection: A sustainable approach to Malaysia's rare-earth industry," Resources Policy, Elsevier, vol. 83(C).
    5. Kai Lei & Buqing Ye & Jin Cao & Rui Zhang & Dong Liu, 2017. "Combustion Characteristics of Single Particles from Bituminous Coal and Pine Sawdust in O 2 /N 2 , O 2 /CO 2 , and O 2 /H 2 O Atmospheres," Energies, MDPI, vol. 10(11), pages 1-12, October.
    6. Khouya, Ahmed, 2021. "Modelling and analysis of a hybrid solar dryer for woody biomass," Energy, Elsevier, vol. 216(C).
    7. Peyman Alizadeh & Lope G. Tabil & Edmund Mupondwa & Xue Li & Duncan Cree, 2023. "Technoeconomic Feasibility of Bioenergy Production from Wood Sawdust," Energies, MDPI, vol. 16(4), pages 1-18, February.
    8. Daniele Basso & Elsa Weiss-Hortala & Francesco Patuzzi & Marco Baratieri & Luca Fiori, 2018. "In Deep Analysis on the Behavior of Grape Marc Constituents during Hydrothermal Carbonization," Energies, MDPI, vol. 11(6), pages 1-19, May.
    9. Gómez-de la Cruz, Francisco J. & Casanova-Peláez, Pedro J. & Palomar-Carnicero, José M. & Cruz-Peragón, Fernando, 2014. "Drying kinetics of olive stone: A valuable source of biomass obtained in the olive oil extraction," Energy, Elsevier, vol. 75(C), pages 146-152.
    10. Xie, Teng & Yao, Zonglu & Huo, Lili & Jia, Jixiu & Zhang, Peizhen & Tian, Liwei & Zhao, Lixin, 2023. "Characteristics of biochar derived from the co-pyrolysis of corn stalk and mulch film waste," Energy, Elsevier, vol. 262(PB).
    11. Marcin Jewiarz & Marek Wróbel & Krzysztof Mudryk & Szymon Szufa, 2020. "Impact of the Drying Temperature and Grinding Technique on Biomass Grindability," Energies, MDPI, vol. 13(13), pages 1-22, July.
    12. Gyeong-Min Kim & Jong-Pil Kim & Kevin Yohanes Lisandy & Chung-Hwan Jeon, 2017. "Experimental Model Development of Oxygen-Enriched Combustion Kinetics on Porous Coal Char and Non-Porous Graphite," Energies, MDPI, vol. 10(9), pages 1-14, September.
    13. Guo, Shenghui & Meng, Fanrui & Peng, Pai & Xu, Jialing & Jin, Hui & Chen, Yunan & Guo, Liejin, 2022. "Thermodynamic analysis of the superiority of the direct mass transfer design in the supercritical water gasification system," Energy, Elsevier, vol. 244(PA).
    14. Nnorom, I.C. & Osibanjo, O. & Ogwuegbu, M.O.C., 2011. "Global disposal strategies for waste cathode ray tubes," Resources, Conservation & Recycling, Elsevier, vol. 55(3), pages 275-290.
    15. Intan Nazirah Mohammad & Clarence M. Ongkudon & Mailin Misson, 2020. "Physicochemical Properties and Lignin Degradation of Thermal-Pretreated Oil Palm Empty Fruit Bunch," Energies, MDPI, vol. 13(22), pages 1-12, November.
    16. Gyeong-Min Kim & Dae-Gyun Lee & Chung-Hwan Jeon, 2019. "Fundamental Characteristics and Kinetic Analysis of Lignocellulosic Woody and Herbaceous Biomass Fuels," Energies, MDPI, vol. 12(6), pages 1-16, March.
    17. Spence, Jennifer & Buttsworth, David & Carter, Brad, 2022. "Energy content, bulk density, and the latent heat of vaporisation characteristics of abattoir paunch waste," Energy, Elsevier, vol. 248(C).
    18. John Steven Devia-Orjuela & Christian E Alvarez-Pugliese & Dayana Donneys-Victoria & Nilson Marriaga Cabrales & Luz Edith Barba Ho & Balazs Brém & Anca Sauciuc & Emese Gál & Douglas Espin & Martin Sch, 2019. "Evaluation of Press Mud, Vinasse Powder and Extraction Sludge with Ethanol in a Pyrolysis Process," Energies, MDPI, vol. 12(21), pages 1-21, October.
    19. Ravaghi-Ardebili, Zohreh & Manenti, Flavio & Corbetta, Michele & Pirola, Carlo & Ranzi, Eliseo, 2015. "Biomass gasification using low-temperature solar-driven steam supply," Renewable Energy, Elsevier, vol. 74(C), pages 671-680.
    20. Waheed A. Rasaq & Mateusz Golonka & Miklas Scholz & Andrzej Białowiec, 2021. "Opportunities and Challenges of High-Pressure Fast Pyrolysis of Biomass: A Review," Energies, MDPI, vol. 14(17), pages 1-20, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:245:y:2022:i:c:s0360544222001712. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.