IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v239y2022ipcs0360544221024890.html
   My bibliography  Save this article

Transient CFD simulation of charging hot water tank

Author

Listed:
  • Dzierwa, Piotr
  • Taler, Jan
  • Peret, Patryk
  • Taler, Dawid
  • Trojan, Marcin

Abstract

This paper presents characteristics of heat accumulation system operation in one of the Polish combined heat and power (CHP) plants. The heat source cooperating with this installation is cogeneration units consisting of gas engines with a total heat output of 8 MWt and total electrical power of 8 MWe. The total thermal capacity of the non-pressure hot water accumulator is 75 MWh. An important issue in the case of hot water tanks is thermal stratification caused by the difference in density between higher-temperature water, located at the top of the hot water storage tank and colder water at its bottom. The article presents the results of numerical analysis based on the axial-symmetric model of a hot water tank using Ansys Fluent R19.2 software. Simulations with the Computational Fluid Dynamics (CFD) method were carried out for the process of charging the heat accumulator lasting 10 h. The effect of mesh density on the results obtained was analysed. The results were compared with the measurement data from the CHP plant. Heat losses from the hot water tank were taken into account and the density characteristics of the heat flux lost to the environment were presented.

Suggested Citation

  • Dzierwa, Piotr & Taler, Jan & Peret, Patryk & Taler, Dawid & Trojan, Marcin, 2022. "Transient CFD simulation of charging hot water tank," Energy, Elsevier, vol. 239(PC).
    • Handle: RePEc:eee:energy:v:239:y:2022:i:pc:s0360544221024890
    DOI: 10.1016/j.energy.2021.122241
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221024890
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.122241?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Trojan, Marcin & Taler, Dawid & Dzierwa, Piotr & Taler, Jan & Kaczmarski, Karol & Wrona, Jan, 2019. "The use of pressure hot water storage tanks to improve the energy flexibility of the steam power unit," Energy, Elsevier, vol. 173(C), pages 926-936.
    2. Sacharczuk, Jacek & Taler, Dawid, 2019. "Numerical and experimental study on the thermal performance of the concrete accumulator for solar heating systems," Energy, Elsevier, vol. 170(C), pages 967-977.
    3. Wang, Zilong & Zhang, Hua & Dou, Binlin & Huang, Huajie & Wu, Weidong & Wang, Zhiyun, 2017. "Experimental and numerical research of thermal stratification with a novel inlet in a dynamic hot water storage tank," Renewable Energy, Elsevier, vol. 111(C), pages 353-371.
    4. Li, Qiong & Huang, Xiaoqiao & Tai, Yonghang & Gao, Wenfeng & Wenxian, L. & Liu, Wuming, 2021. "Thermal stratification in a solar hot water storage tank with mantle heat exchanger," Renewable Energy, Elsevier, vol. 173(C), pages 1-11.
    5. Taler, Dawid & Dzierwa, Piotr & Trojan, Marcin & Sacharczuk, Jacek & Kaczmarski, Karol & Taler, Jan, 2019. "Mathematical modeling of heat storage unit for air heating of the building," Renewable Energy, Elsevier, vol. 141(C), pages 988-1004.
    6. Chandra, Yogender Pal & Matuska, Tomas, 2020. "Numerical prediction of the stratification performance in domestic hot water storage tanks," Renewable Energy, Elsevier, vol. 154(C), pages 1165-1179.
    7. Kocijel, Lino & Mrzljak, Vedran & Glažar, Vladimir, 2020. "Numerical analysis of geometrical and process parameters influence on temperature stratification in a large volumetric heat storage tank," Energy, Elsevier, vol. 194(C).
    8. Yang, Zheng & Chen, Haisheng & Wang, Liang & Sheng, Yong & Wang, Yifei, 2016. "Comparative study of the influences of different water tank shapes on thermal energy storage capacity and thermal stratification," Renewable Energy, Elsevier, vol. 85(C), pages 31-44.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dawid Taler & Jan Taler & Tomasz Sobota & Jarosław Tokarczyk, 2022. "Cooling Modelling of an Electrically Heated Ceramic Heat Accumulator," Energies, MDPI, vol. 15(16), pages 1-26, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Agnieszka Malec & Tomasz Cholewa & Alicja Siuta-Olcha, 2021. "Influence of Cold Water Inlets and Obstacles on the Energy Efficiency of the Hot Water Production Process in a Hot Water Storage Tank," Energies, MDPI, vol. 14(20), pages 1-26, October.
    2. Piyatida Trinuruk & Papangkorn Jenyongsak & Somchai Wongwises, 2022. "Comparative Study of Inlet Structure and Obstacle Plate Designs Affecting the Temperature Stratification Characteristics," Energies, MDPI, vol. 15(6), pages 1-25, March.
    3. Rendall, Joseph & Abu-Heiba, Ahmad & Gluesenkamp, Kyle & Nawaz, Kashif & Worek, William & Elatar, Ahmed, 2021. "Nondimensional convection numbers modeling thermally stratified storage tanks: Richardson's number and hot-water tanks," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    4. Li, Qiong & Huang, Xiaoqiao & Tai, Yonghang & Gao, Wenfeng & Wenxian, L. & Liu, Wuming, 2021. "Thermal stratification in a solar hot water storage tank with mantle heat exchanger," Renewable Energy, Elsevier, vol. 173(C), pages 1-11.
    5. María Gasque & Federico Ibáñez & Pablo González-Altozano, 2021. "Minimum Number of Experimental Data for the Thermal Characterization of a Hot Water Storage Tank," Energies, MDPI, vol. 14(16), pages 1-16, August.
    6. Jiří Jaromír Klemeš & Petar Sabev Varbanov & Paweł Ocłoń & Hon Huin Chin, 2019. "Towards Efficient and Clean Process Integration: Utilisation of Renewable Resources and Energy-Saving Technologies," Energies, MDPI, vol. 12(21), pages 1-32, October.
    7. Lou, Wanruo & Xie, Baoshan & Aubril, Julien & Fan, Yilin & Luo, Lingai & Arrivé, Arnaud, 2023. "Optimized flow distributor for stabilized thermal stratification in a single-medium thermocline storage tank: A numerical and experimental study," Energy, Elsevier, vol. 263(PA).
    8. Kurşun, Burak & Ökten, Korhan, 2018. "Effect of rectangular hot water tank position and aspect ratio on thermal stratification enhancement," Renewable Energy, Elsevier, vol. 116(PA), pages 639-646.
    9. Liang, Haobin & Liu, Liu & Zhong, Ziwen & Gan, Yixiang & Wu, Jian-Yong & Niu, Jianlei, 2022. "Towards idealized thermal stratification in a novel phase change emulsion storage tank," Applied Energy, Elsevier, vol. 310(C).
    10. Bai, Yakai & Wang, Zhifeng & Fan, Jianhua & Yang, Ming & Li, Xiaoxia & Chen, Longfei & Yuan, Guofeng & Yang, Junfeng, 2020. "Numerical and experimental study of an underground water pit for seasonal heat storage," Renewable Energy, Elsevier, vol. 150(C), pages 487-508.
    11. Dawid Taler & Jan Taler & Tomasz Sobota & Jarosław Tokarczyk, 2022. "Cooling Modelling of an Electrically Heated Ceramic Heat Accumulator," Energies, MDPI, vol. 15(16), pages 1-26, August.
    12. Behzadi, Amirmohammad & Holmberg, Sture & Duwig, Christophe & Haghighat, Fariborz & Ooka, Ryozo & Sadrizadeh, Sasan, 2022. "Smart design and control of thermal energy storage in low-temperature heating and high-temperature cooling systems: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 166(C).
    13. Kicsiny, Richárd, 2018. "Black-box model for solar storage tanks based on multiple linear regression," Renewable Energy, Elsevier, vol. 125(C), pages 857-865.
    14. Wang, Zilong & Zhu, Mengshuai & Zhang, Hua & Zhou, Ying & Sun, Xiangxin & Dou, Binlin & Wu, Weidong & Zhang, Guanhua & Jiang, Long, 2023. "Experimental and simulation study on the heat transfer mechanism and heat storage performance of copper metal foam composite paraffin wax during melting process," Energy, Elsevier, vol. 272(C).
    15. Lihua Cao & Jingwen Yu & Xifeng Liu & Zhanzhou Wang, 2024. "Evaluation Method and Analysis on Performance of Diffuser in Heat Storage Tank," Energies, MDPI, vol. 17(3), pages 1-15, January.
    16. Wunvisa Tipasri & Amnart Suksri & Karthikeyan Velmurugan & Tanakorn Wongwuttanasatian, 2022. "Energy Management for an Air Conditioning System Using a Storage Device to Reduce the On-Peak Power Consumption," Energies, MDPI, vol. 15(23), pages 1-19, November.
    17. Wanruo Lou & Lingai Luo & Yuchao Hua & Yilin Fan & Zhenyu Du, 2021. "A Review on the Performance Indicators and Influencing Factors for the Thermocline Thermal Energy Storage Systems," Energies, MDPI, vol. 14(24), pages 1-19, December.
    18. Yan, Hui & Liu, Ming & Wang, Zhu & Zhang, Kezhen & Chong, Daotong & Yan, Junjie, 2023. "Flexibility enhancement of solar-aided coal-fired power plant under different direct normal irradiance conditions," Energy, Elsevier, vol. 262(PA).
    19. Rusin, Krzysztof & Ochmann, Jakub & Bartela, Łukasz & Rulik, Sebastian & Stanek, Bartosz & Jurczyk, Michał & Waniczek, Sebastian, 2022. "Influence of geometrical dimensions and particle diameter on exergy performance of packed-bed thermal energy storage," Energy, Elsevier, vol. 260(C).
    20. Shidong Wang & Xing Wang & Mingqiang Mao & Yongtao Wang & Shiping Liu & Baoming Luo & Tao Li, 2023. "The Influence of Storage Tank Volume on the Nighttime Heat Dissipation and Freezing Process of All-Glass Vacuum Tube Solar Water Heaters," Energies, MDPI, vol. 16(12), pages 1-24, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:239:y:2022:i:pc:s0360544221024890. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.