IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v190y2020ics0360544219320109.html
   My bibliography  Save this article

Determination of laminar burning characteristics of a surrogate for a pyrolysis fuel using constant volume method

Author

Listed:
  • Xu, Cangsu
  • Wang, Hanyu
  • Oppong, Francis
  • Li, Xiaolu
  • Zhou, Kangquan
  • Zhou, Wenhua
  • Wu, Siyuan
  • Wang, Chongming

Abstract

A fast pyrolysis biofuel, mainly consisting to 98% of ethanol, ethyl acetate, diethyl ether, acetone and 2-butanone with mass ratios of 9:6:2:1:1, was catalytically produced from rice husk. A preliminary engine test demonstrated this biofuel has the possibility of being a gasoline blending stock. However, its fundamental burning features are not fully understood. This work presents the experimental investigations of the spherical propagating flame of a surrogate fuel representing the biofuel in a constant volume combustion chamber (CVCC). Tests were conducted at initial pressures of 0.1–0.4 MPa, initial temperatures of 358–418 K, and equivalence ratios of 0.7–1.4. Employing the constant volume method (CVM) allows determining laminar burning speeds (Su) of this surrogate at conditions far beyond the initial conditions (0.1–0.8 MPa, 358–490 K). Power law fitting correlations between Su and pressure were obtained via the constant volume method (CVM). Cellularity appears when pressure or temperature is high, and cellular burning speed was calculated by CVM as well. Su determined via the constant pressure method (CPM) were compared with those from the CVM. Discrepancies between the results from the CVM and the CPM are within 15%, except at the conditions where flame cellularity appeared. Additionally, an explicit correlation of Su was obtained from the experimental results.

Suggested Citation

  • Xu, Cangsu & Wang, Hanyu & Oppong, Francis & Li, Xiaolu & Zhou, Kangquan & Zhou, Wenhua & Wu, Siyuan & Wang, Chongming, 2020. "Determination of laminar burning characteristics of a surrogate for a pyrolysis fuel using constant volume method," Energy, Elsevier, vol. 190(C).
    • Handle: RePEc:eee:energy:v:190:y:2020:i:c:s0360544219320109
    DOI: 10.1016/j.energy.2019.116315
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219320109
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116315?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zeng, Wen & Liu, Jing & Ma, Hongan & Liu, Yu & Liu, Aiguo, 2018. "Experimental study on the flame propagation and laminar combustion characteristics of landfill gas," Energy, Elsevier, vol. 158(C), pages 437-448.
    2. Wan, Jianlong & Fan, Aiwu & Yao, Hong & Liu, Wei, 2016. "Experimental investigation and numerical analysis on the blow-off limits of premixed CH4/air flames in a mesoscale bluff-body combustor," Energy, Elsevier, vol. 113(C), pages 193-203.
    3. Hu, Xianzhong & Yu, Qingbo, 2018. "Effect of the elevated initial temperature on the laminar flame speeds of oxy-methane mixtures," Energy, Elsevier, vol. 147(C), pages 876-883.
    4. Lee, Seungro & Ha, Heonrok & Dunn-Rankin, Derek & Kwon, Oh Chae, 2017. "Effects of pressure on structure and extinction limits of counterflow nonpremixed water-laden methane/air flames," Energy, Elsevier, vol. 134(C), pages 545-553.
    5. Tang, Aikun & Cai, Tao & Deng, Jiang & Zhao, Dan & Huang, Qiuhan & Zhou, Chen, 2019. "Experimental study on flame structure transitions of premixed propane/air in micro-scale planar combustors," Energy, Elsevier, vol. 179(C), pages 558-570.
    6. Fan, Aiwu & Zhang, He & Wan, Jianlong, 2017. "Numerical investigation on flame blow-off limit of a novel microscale Swiss-roll combustor with a bluff-body," Energy, Elsevier, vol. 123(C), pages 252-259.
    7. Ku, Jae Won & Choi, Sun & Kim, Hee Kyung & Lee, Seungro & Kwon, Oh Chae, 2018. "Extinction limits and structure of counterflow nonpremixed methane-ammonia/air flames," Energy, Elsevier, vol. 165(PA), pages 314-325.
    8. Askari, Omid & Elia, Mimmo & Ferrari, Matthew & Metghalchi, Hameed, 2017. "Cell formation effects on the burning speeds and flame front area of synthetic gas at high pressures and temperatures," Applied Energy, Elsevier, vol. 189(C), pages 568-577.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yangxun Liu & Weinan Liu & Huihong Liao & Wenhua Zhou & Cangsu Xu, 2021. "An Experimental and Kinetic Modelling Study on Laminar Premixed Flame Characteristics of Ethanol/Acetone Mixtures," Energies, MDPI, vol. 14(20), pages 1-18, October.
    2. Yangxun Liu & Weinan Liu & Huihong Liao & Hasier Ashan & Wenhua Zhou & Cangsu Xu, 2022. "An Experimental and a Kinetic Modelling Study of Ethanol/Acetone/Ethyl Acetate Mixtures," Energies, MDPI, vol. 15(9), pages 1-15, April.
    3. Oppong, Francis & Zhongyang, Luo & Li, Xiaolu & Song, Yang & Xu, Cangsu & Diaby, Abdullatif Lacina, 2022. "Methyl pentanoate laminar burning characteristics: Experimental and numerical analysis," Renewable Energy, Elsevier, vol. 197(C), pages 228-236.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kang, Yinhu & Wang, Qiang & Zhang, Pengyuan & Liu, Congcong & Lu, Xiaofeng & Wang, Quanhai, 2020. "Study on flame structure and extinction mechanism of dimethyl ether spherical diffusion flames," Energy, Elsevier, vol. 193(C).
    2. Wan, Jianlong & Xu, Zuwei & Zhao, Haibo, 2018. "Methane/air premixed flame topology structure in a mesoscale combustor with a plate flame holder and preheating channels," Energy, Elsevier, vol. 165(PB), pages 802-811.
    3. Pan, Jianfeng & Zhang, Chenxin & Pan, Zhenhua & Wu, Di & Zhu, Yuejin & Lu, Qingbo & Zhang, Yi, 2020. "Investigation on the effect of bluff body ball on the combustion characteristics for methane/oxygen in micro combustor," Energy, Elsevier, vol. 190(C).
    4. Yang, Xiao & Yang, Wenming & Dong, Shikui & Tan, Heping, 2020. "Flame stability analysis of premixed hydrogen/air mixtures in a swirl micro-combustor," Energy, Elsevier, vol. 209(C).
    5. Zuo, Wei & E, Jiaqiang & Hu, Wenyu & Jin, Yu & Han, Dandan, 2017. "Numerical investigations on combustion characteristics of H2/air premixed combustion in a micro elliptical tube combustor," Energy, Elsevier, vol. 126(C), pages 1-12.
    6. Xiao, Peng & Lee, Chia-fon & Wu, Han & Liu, Fushui, 2020. "Effects of hydrogen addition on the laminar methanol-air flame under different initial temperatures," Renewable Energy, Elsevier, vol. 154(C), pages 209-222.
    7. Yang, Xiao & He, Zhihong & Cha, Suna & Zhao, Lei & Dong, Shikui & Tan, Heping, 2020. "Parametric analysis on the combustion and thermal performance of a swirl micro-combustor for micro thermophotovoltaic system," Energy, Elsevier, vol. 198(C).
    8. Wan, Jianlong & Zhao, Haibo, 2018. "Thermal performance of solid walls in a mesoscale combustor with a plate flame holder and preheating channels," Energy, Elsevier, vol. 157(C), pages 448-459.
    9. Sun, Bowen & Kang, Xin & Wang, Yu, 2020. "Numerical investigations on the methane-oxygen diffusion flame-street phenomena in a microchannel: Effects of wall temperatures, inflow rates and global equivalence ratios on flame behaviors and combu," Energy, Elsevier, vol. 207(C).
    10. Fu-Sheng Li & Guo-Xiu Li & Yan-Huan Jiang & Hong-Meng Li & Zuo-Yu Sun, 2017. "Study on the Effect of Flame Instability on the Flame Structural Characteristics of Hydrogen/Air Mixtures Based on the Fast Fourier Transform," Energies, MDPI, vol. 10(5), pages 1-16, May.
    11. Kiani, Mehrdad & Houshfar, Ehsan & Ashjaee, Mehdi, 2019. "Experimental investigations on the flame structure and temperature field of landfill gas in impinging slot burners," Energy, Elsevier, vol. 170(C), pages 507-520.
    12. Peng, Qingguo & E, Jiaqiang & Yang, W.M. & Xu, Hongpeng & Chen, Jingwei & Meng, Tian & Qiu, Runzhi, 2018. "Effects analysis on combustion and thermal performance enhancement of a nozzle-inlet micro tube fueled by the premixed hydrogen/air," Energy, Elsevier, vol. 160(C), pages 349-360.
    13. Aravind, B. & Khandelwal, Bhupendra & Ramakrishna, P.A. & Kumar, Sudarshan, 2020. "Towards the development of a high power density, high efficiency, micro power generator," Applied Energy, Elsevier, vol. 261(C).
    14. Peng, Qingguo & Yang, Wenming & E, Jiaqiang & Li, Shaobo & Li, Zhenwei & Xu, Hongpeng & Fu, Guang, 2021. "Effects of propane addition and burner scale on the combustion characteristics and working performance," Applied Energy, Elsevier, vol. 285(C).
    15. Wan, Jianlong & Zhao, Haibo, 2020. "Effect of conjugate heat exchange of flame holder on laminar premixed flame stabilization in a meso-scale diverging combustor," Energy, Elsevier, vol. 198(C).
    16. Tang, Aikun & Cai, Tao & Deng, Jiang & Zhao, Dan & Huang, Qiuhan & Zhou, Chen, 2019. "Experimental study on flame structure transitions of premixed propane/air in micro-scale planar combustors," Energy, Elsevier, vol. 179(C), pages 558-570.
    17. Zhang, Haonan & Duan, Buren & Wu, Lizhi & Hua, Zuohao & Bao, Zijing & Guo, Ning & Ye, Yinghua & Galfetti, Luciano & DeLuca, Luigi T. & Shen, Ruiqi, 2021. "Actualization of an efficient throttleable laser propulsion mode," Energy, Elsevier, vol. 221(C).
    18. Huang, Yakun & He, Xiaomin & Jin, Yi & Zhu, Huanyu & Zhu, Zhixin, 2021. "Effect of non-uniform inlet profile on the combustion performance of an afterburner with bluff body," Energy, Elsevier, vol. 216(C).
    19. Yang, Ke & Chen, Kaifeng & Ji, Hong & Xing, Zhixiang & Hao, Yongmei & Wu, Jie & Jiang, Juncheng, 2021. "Experimental study on the effect of modified attapulgite powder with different outlet blockage ratios on methane-air explosion," Energy, Elsevier, vol. 237(C).
    20. Gurunadh Velidi & Chun Sang Yoo, 2023. "A Review on Flame Stabilization Technologies for UAV Engine Micro-Meso Scale Combustors: Progress and Challenges," Energies, MDPI, vol. 16(9), pages 1-44, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:190:y:2020:i:c:s0360544219320109. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.