IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v88y2011i5p1596-1605.html
   My bibliography  Save this article

Geometry development of the internal duct system of a heat pump tumble dryer based on fluid mechanic parameters from a CFD software

Author

Listed:
  • Rezk, Kamal
  • Forsberg, Jan

Abstract

One aspect of reducing the energy consumption of a household tumble dryer is to reduce the pressure drop of the circulating air in the internal duct system. It is, however, costly and time consuming to design several prototypes for airflow measurements. In this paper, several fluid mechanic parameters in a partial model of the internal duct system of a tumble dryer have been studied in the CFD software Comsol MultiPhysics. The purpose was to establish a numerically based design process, where the design is conducted based on visual analysis of air velocity and vorticity, and two design criteria. The geometry design was conducted by a CAD-engineer, which was the counterpart of this project. In order to enable a successful design process, it was essential to establish a strong relation between fluid parameters and design criteria in order to share knowledge effectively with the CAD-engineer. Two geometry modifications, based on a standard model, were conducted on the duct. Based on the design criteria, the pressure drop and the non-uniformity coefficient of the outlet airflow, the second modification (Modification 2) represents an improvement as the pressure drop is reduced by 23% and the uniformity at the outflow section is increased by 3%.

Suggested Citation

  • Rezk, Kamal & Forsberg, Jan, 2011. "Geometry development of the internal duct system of a heat pump tumble dryer based on fluid mechanic parameters from a CFD software," Applied Energy, Elsevier, vol. 88(5), pages 1596-1605, May.
    • Handle: RePEc:eee:appene:v:88:y:2011:i:5:p:1596-1605
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(10)00462-9
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pinelli, M. & Bucci, G., 2009. "Numerical based design of exhaust gas system in a cogeneration power plant," Applied Energy, Elsevier, vol. 86(6), pages 857-866, June.
    2. Bansal, Pradeep & Sharma, Karishma & Islam, Sumana, 2010. "Thermal analysis of a new concept in a household clothes tumbler dryer," Applied Energy, Elsevier, vol. 87(5), pages 1562-1571, May.
    3. Hu, Ssu-Yuan & Cheng, Jung-Ho, 2008. "Innovatory designs for ducted wind turbines," Renewable Energy, Elsevier, vol. 33(7), pages 1491-1498.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. De Bellis, Fabio & Catalano, Luciano A., 2012. "CFD optimization of an immersed particle heat exchanger," Applied Energy, Elsevier, vol. 97(C), pages 841-848.
    2. Bansal, Pradeep & Mohabir, Amar & Miller, William, 2016. "A novel method to determine air leakage in heat pump clothes dryers," Energy, Elsevier, vol. 96(C), pages 1-7.
    3. Tomasz Mołczan & Piotr Cyklis, 2023. "Impact of the Evaporation Temperature on the Air Drying Rate for a Finned Heat Exchanger," Energies, MDPI, vol. 16(5), pages 1-14, February.
    4. Gungor, Aysegul & Erbay, Zafer & Hepbasli, Arif, 2011. "Exergoeconomic analyses of a gas engine driven heat pump drier and food drying process," Applied Energy, Elsevier, vol. 88(8), pages 2677-2684, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hosseini, S. Rasoul & Ganji, Davoud Domiri, 2020. "A novel design of nozzle-diffuser to enhance performance of INVELOX wind turbine," Energy, Elsevier, vol. 198(C).
    2. Rödder, Maximilian & Frank, Lena & Kirschner, Daniel & Neef, Matthias & Adam, Mario, 2018. "EnergiBUS4home – Sustainable energy resourcing in low-energy buildings," Energy, Elsevier, vol. 159(C), pages 638-647.
    3. Mauro, S. & Brusca, S. & Lanzafame, R. & Messina, M., 2019. "CFD modeling of a ducted Savonius wind turbine for the evaluation of the blockage effects on rotor performance," Renewable Energy, Elsevier, vol. 141(C), pages 28-39.
    4. Singh, Panna Lal, 2011. "Silk cocoon drying in forced convection type solar dryer," Applied Energy, Elsevier, vol. 88(5), pages 1720-1726, May.
    5. Chong, Wen-Tong & Muzammil, Wan Khairul & Ong, Hwai-Chyuan & Sopian, Kamaruzzaman & Gwani, Mohammed & Fazlizan, Ahmad & Poh, Sin-Chew, 2019. "Performance analysis of the deflector integrated cross axis wind turbine," Renewable Energy, Elsevier, vol. 138(C), pages 675-690.
    6. Manganhar, Abdul Latif & Rajpar, Altaf Hussain & Luhur, Muhammad Ramzan & Samo, Saleem Raza & Manganhar, Mehtab, 2019. "Performance analysis of a savonius vertical axis wind turbine integrated with wind accelerating and guiding rotor house," Renewable Energy, Elsevier, vol. 136(C), pages 512-520.
    7. Wong, Kok Hoe & Chong, Wen Tong & Sukiman, Nazatul Liana & Poh, Sin Chew & Shiah, Yui-Chuin & Wang, Chin-Tsan, 2017. "Performance enhancements on vertical axis wind turbines using flow augmentation systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 904-921.
    8. Pinelli, Michele & Suman, Alessio, 2014. "A numerical method for the efficient design of free opening hoods in industrial and domestic applications," Energy, Elsevier, vol. 74(C), pages 484-493.
    9. Anbarsooz, M. & Amiri, M. & Rashidi, I., 2019. "A novel curtain design to enhance the aerodynamic performance of Invelox: A steady-RANS numerical simulation," Energy, Elsevier, vol. 168(C), pages 207-221.
    10. Bansal, Pradeep & Mohabir, Amar & Miller, William, 2016. "A novel method to determine air leakage in heat pump clothes dryers," Energy, Elsevier, vol. 96(C), pages 1-7.
    11. Jeongsu Park & Hyung-Jo Jung & Seung-Woo Lee & Jiyoung Park, 2015. "A New Building-Integrated Wind Turbine System Utilizing the Building," Energies, MDPI, vol. 8(10), pages 1-25, October.
    12. Nizetic, S. & Klarin, B., 2010. "A simplified analytical approach for evaluation of the optimal ratio of pressure drop across the turbine in solar chimney power plants," Applied Energy, Elsevier, vol. 87(2), pages 587-591, February.
    13. Raghoo, Pravesh & Surroop, Dinesh & Wolf, Franziska, 2017. "Natural gas to improve energy security in Small Island Developing States: A techno-economic analysis," Development Engineering, Elsevier, vol. 2(C), pages 92-98.
    14. Chong, W.T. & Pan, K.C. & Poh, S.C. & Fazlizan, A. & Oon, C.S. & Badarudin, A. & Nik-Ghazali, N., 2013. "Performance investigation of a power augmented vertical axis wind turbine for urban high-rise application," Renewable Energy, Elsevier, vol. 51(C), pages 388-397.
    15. Patel, Viral K. & Gluesenkamp, Kyle R. & Goodman, Dakota & Gehl, Anthony, 2018. "Experimental evaluation and thermodynamic system modeling of thermoelectric heat pump clothes dryer," Applied Energy, Elsevier, vol. 217(C), pages 221-232.
    16. El Fil, Bachir & Garimella, Srinivas, 2022. "Energy-efficient gas-fired tumble dryer with adsorption thermal storage," Energy, Elsevier, vol. 239(PA).
    17. Ogonowski, Zbigniew, 2011. "Drying control system for spray booth with optimization of fuel consumption," Applied Energy, Elsevier, vol. 88(5), pages 1586-1595, May.
    18. Matelli, José Alexandre & Bazzo, Edson & da Silva, Jonny Carlos, 2011. "Development of a case-based reasoning prototype for cogeneration plant design," Applied Energy, Elsevier, vol. 88(9), pages 3030-3041.
    19. Wang, Yong & He, Wei & Tian, De, 2012. "Calculation of hoisting forces of the wind turbine rotor based on wind conditions," Renewable Energy, Elsevier, vol. 39(1), pages 323-328.
    20. Nikolić, Vlastimir & Petković, Dalibor & Shamshirband, Shahaboddin & Ćojbašić, Žarko, 2015. "Adaptive neuro-fuzzy estimation of diffuser effects on wind turbine performance," Energy, Elsevier, vol. 89(C), pages 324-333.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:88:y:2011:i:5:p:1596-1605. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.