IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v87y2010i5p1679-1686.html
   My bibliography  Save this article

Performance and combustion characteristics of biodiesel-diesel-methanol blend fuelled engine

Author

Listed:
  • Qi, D.H.
  • Chen, H.
  • Geng, L.M.
  • Bian, Y.ZH.
  • Ren, X.CH.

Abstract

An experimental investigation was conducted to evaluate the effects of using methanol as additive to biodiesel-diesel blends on the engine performance, emissions and combustion characteristics of a direct injection diesel engine under variable operating conditions. BD50 (50% biodiesel and 50% diesel in vol.) was prepared as the baseline fuel. Methanol was added to BD50 as an additive by volume percent of 5% and 10% (denoted as BDM5 and BDM10). The results indicate that the combustion starts later for BDM5 and BDM10 than for BD50 at low engine load, but is almost identical at high engine load. At low engine load of 1500Â r/min, BDM5 and BDM10 show the similar peak cylinder pressure and peak of pressure rise rate to BD50, and higher peak of heat release rate than that of BD50. At low engine load of 1800Â r/min, the peak cylinder pressure and the peak of pressure rise rate of BDM5 and BDM10 are lower than those of BD50, and the peak of heat release rate is similar to that of BD50. The crank angles at which the peak values occur are later for BDM5 and BDM10 than for BD50. At high engine load, the peak cylinder pressure, the peak of pressure rise rate and peak of heat release rate of BDM5 and BDM10 are higher than those of BD50, and the crank angle of peak values for all tested fuels are almost same. The power and torque outputs of BDM5 and BDM10 are slightly lower than those of BD50. BDM5 and BDM10 show dramatic reduction of smoke emissions. CO emissions are slightly lower, and NOx and HC emissions are almost similar to those of BD50 at speed characteristic of full engine load.

Suggested Citation

  • Qi, D.H. & Chen, H. & Geng, L.M. & Bian, Y.ZH. & Ren, X.CH., 2010. "Performance and combustion characteristics of biodiesel-diesel-methanol blend fuelled engine," Applied Energy, Elsevier, vol. 87(5), pages 1679-1686, May.
    • Handle: RePEc:eee:appene:v:87:y:2010:i:5:p:1679-1686
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(09)00444-9
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Agarwal, Avinash Kumar & Rajamanoharan, K., 2009. "Experimental investigations of performance and emissions of Karanja oil and its blends in a single cylinder agricultural diesel engine," Applied Energy, Elsevier, vol. 86(1), pages 106-112, January.
    2. Qi, D.H. & Geng, L.M. & Chen, H. & Bian, Y.ZH. & Liu, J. & Ren, X.CH., 2009. "Combustion and performance evaluation of a diesel engine fueled with biodiesel produced from soybean crude oil," Renewable Energy, Elsevier, vol. 34(12), pages 2706-2713.
    3. Öner, Cengiz & Altun, Sehmus, 2009. "Biodiesel production from inedible animal tallow and an experimental investigation of its use as alternative fuel in a direct injection diesel engine," Applied Energy, Elsevier, vol. 86(10), pages 2114-2120, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Subramaniam, D. & Murugesan, A. & Avinash, A. & Kumaravel, A., 2013. "Bio-diesel production and its engine characteristics—An expatiate view," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 361-370.
    2. Qi, D.H. & Chen, H. & Geng, L.M. & Bian, Y.Z., 2011. "Effect of diethyl ether and ethanol additives on the combustion and emission characteristics of biodiesel-diesel blended fuel engine," Renewable Energy, Elsevier, vol. 36(4), pages 1252-1258.
    3. Kumar, Niraj & Varun, & Chauhan, Sant Ram, 2013. "Performance and emission characteristics of biodiesel from different origins: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 633-658.
    4. Mohammed Kamil & Fatima M. Almarashda, 2023. "Economic Viability and Engine Performance Evaluation of Biodiesel Derived from Desert Palm Date Seeds," Energies, MDPI, vol. 16(3), pages 1-22, February.
    5. Payri, R. & Salvador, F.J. & Gimeno, J. & De la Morena, J., 2011. "Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization," Applied Energy, Elsevier, vol. 88(4), pages 1068-1074, April.
    6. Li, Bowen & Li, Yanfei & Liu, Haoye & Liu, Fang & Wang, Zhi & Wang, Jianxin, 2017. "Combustion and emission characteristics of diesel engine fueled with biodiesel/PODE blends," Applied Energy, Elsevier, vol. 206(C), pages 425-431.
    7. Dariusz Kurczyński & Grzegorz Wcisło & Piotr Łagowski, 2021. "Experimental Study of Fuel Consumption and Exhaust Gas Composition of a Diesel Engine Powered by Biodiesel from Waste of Animal Origin," Energies, MDPI, vol. 14(12), pages 1-22, June.
    8. Hazar, Hanbey, 2010. "Cotton methyl ester usage in a diesel engine equipped with insulated combustion chamber," Applied Energy, Elsevier, vol. 87(1), pages 134-140, January.
    9. Balat, Mustafa & Balat, Havva, 2010. "Progress in biodiesel processing," Applied Energy, Elsevier, vol. 87(6), pages 1815-1835, June.
    10. Shahir, V.K. & Jawahar, C.P. & Suresh, P.R., 2015. "Comparative study of diesel and biodiesel on CI engine with emphasis to emissions—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 686-697.
    11. Li, Qin & Yan, Yunjun, 2010. "Production of biodiesel catalyzed by immobilized Pseudomonas cepacia lipase from Sapium sebiferum oil in micro-aqueous phase," Applied Energy, Elsevier, vol. 87(10), pages 3148-3154, October.
    12. Xue, Jinlin & Grift, Tony E. & Hansen, Alan C., 2011. "Effect of biodiesel on engine performances and emissions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1098-1116, February.
    13. Jahirul, M.I. & Rasul, M.G. & Brown, R.J. & Senadeera, W. & Hosen, M.A. & Haque, R. & Saha, S.C. & Mahlia, T.M.I., 2021. "Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)," Renewable Energy, Elsevier, vol. 168(C), pages 632-646.
    14. Mohammed I. Jahirul & Richard J. Brown & Wijitha Senadeera & Ian M. O'Hara & Zoran D. Ristovski, 2013. "The Use of Artificial Neural Networks for Identifying Sustainable Biodiesel Feedstocks," Energies, MDPI, vol. 6(8), pages 1-43, July.
    15. Gogoi, T.K. & Baruah, D.C., 2011. "The use of Koroch seed oil methyl ester blends as fuel in a diesel engine," Applied Energy, Elsevier, vol. 88(8), pages 2713-2725, August.
    16. Datta, Ambarish & Mandal, Bijan Kumar, 2016. "A comprehensive review of biodiesel as an alternative fuel for compression ignition engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 799-821.
    17. Eryilmaz, Tanzer & Yesilyurt, Murat Kadir, 2016. "Influence of blending ratio on the physicochemical properties of safflower oil methyl ester-safflower oil, safflower oil methyl ester-diesel and safflower oil-diesel," Renewable Energy, Elsevier, vol. 95(C), pages 233-247.
    18. Jayaprabakar, J. & Dawn, S.S. & Ranjan, A. & Priyadharsini, P. & George, R.J. & Sadaf, S. & Rajha, C. Rajeswara, 2019. "Process optimization for biodiesel production from sheep skin and its performance, emission and combustion characterization in CI engine," Energy, Elsevier, vol. 174(C), pages 54-68.
    19. Mofijur, M. & Masjuki, H.H. & Kalam, M.A. & Atabani, A.E., 2013. "Evaluation of biodiesel blending, engine performance and emissions characteristics of Jatropha curcas methyl ester: Malaysian perspective," Energy, Elsevier, vol. 55(C), pages 879-887.
    20. Wen, Zhenzhong & Yu, Xinhai & Tu, Shan-Tung & Yan, Jinyue & Dahlquist, Erik, 2010. "Synthesis of biodiesel from vegetable oil with methanol catalyzed by Li-doped magnesium oxide catalysts," Applied Energy, Elsevier, vol. 87(3), pages 743-748, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:87:y:2010:i:5:p:1679-1686. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.