IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v211y2018icp41-49.html
   My bibliography  Save this article

Towards unsupervised learning of thermal comfort using infrared thermography

Author

Listed:
  • Ghahramani, Ali
  • Castro, Guillermo
  • Karvigh, Simin Ahmadi
  • Becerik-Gerber, Burcin

Abstract

Maintaining thermal comfort in built environments is important for occupant health, well-being, and productivity, and also for efficient HVAC system operations. Most of the existing personal thermal comfort learning methods require occupants to provide feedback via a survey to label the monitored environmental or physiological conditions in order to train the prediction models. Accuracy of these models usually drops after the training process as personal thermal comfort is dynamic and changes over time due to climatic variations and/or acclimation. In this paper, we present a hidden Markov model (HMM) based learning method to capture personal thermal comfort using infrared thermography of the human face. We chose human face since its blood vessels has a higher density and it is not covered while performing regular activities in built environments. The learning algorithm has 3 hidden states (i.e., uncomfortably warm, comfortable, uncomfortably cool) and uses discretization for forming the observed states from the continuous infrared measurements. The approach can potentially be used for continuous monitoring of thermal comfort to capture the variations over time. We tested and validated the method in a four-day long experiment with 10 subjects and demonstrated an accuracy of 82.8% for predicting uncomfortable conditions.

Suggested Citation

  • Ghahramani, Ali & Castro, Guillermo & Karvigh, Simin Ahmadi & Becerik-Gerber, Burcin, 2018. "Towards unsupervised learning of thermal comfort using infrared thermography," Applied Energy, Elsevier, vol. 211(C), pages 41-49.
  • Handle: RePEc:eee:appene:v:211:y:2018:i:c:p:41-49
    DOI: 10.1016/j.apenergy.2017.11.021
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626191731601X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2017.11.021?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Al-Sanea, Sami A. & Zedan, M.F., 2008. "Optimized monthly-fixed thermostat-setting scheme for maximum energy-savings and thermal comfort in air-conditioned spaces," Applied Energy, Elsevier, vol. 85(5), pages 326-346, May.
    2. Dounis, A. I. & Manolakis, D. E., 2001. "Design of a fuzzy system for living space thermal-comfort regulation," Applied Energy, Elsevier, vol. 69(2), pages 119-144, June.
    3. Barbeito, Inés & Zaragoza, Sonia & Tarrío-Saavedra, Javier & Naya, Salvador, 2017. "Assessing thermal comfort and energy efficiency in buildings by statistical quality control for autocorrelated data," Applied Energy, Elsevier, vol. 190(C), pages 1-17.
    4. Xu, Xiaoqi & Culligan, Patricia J. & Taylor, John E., 2014. "Energy Saving Alignment Strategy: Achieving energy efficiency in urban buildings by matching occupant temperature preferences with a building’s indoor thermal environment," Applied Energy, Elsevier, vol. 123(C), pages 209-219.
    5. Ning, Haoran & Wang, Zhaojun & Ji, Yuchen, 2016. "Thermal history and adaptation: Does a long-term indoor thermal exposure impact human thermal adaptability?," Applied Energy, Elsevier, vol. 183(C), pages 22-30.
    6. Mostavi, Ehsan & Asadi, Somayeh & Boussaa, Djamel, 2017. "Development of a new methodology to optimize building life cycle cost, environmental impacts, and occupant satisfaction," Energy, Elsevier, vol. 121(C), pages 606-615.
    7. Ghahramani, Ali & Zhang, Kenan & Dutta, Kanu & Yang, Zheng & Becerik-Gerber, Burcin, 2016. "Energy savings from temperature setpoints and deadband: Quantifying the influence of building and system properties on savings," Applied Energy, Elsevier, vol. 165(C), pages 930-942.
    8. Uğursal, Ahmet & Culp, Charles H., 2013. "The effect of temperature, metabolic rate and dynamic localized airflow on thermal comfort," Applied Energy, Elsevier, vol. 111(C), pages 64-73.
    9. Chowdhury, Ashfaque Ahmed & Rasul, M.G. & Khan, M.M.K., 2008. "Thermal-comfort analysis and simulation for various low-energy cooling-technologies applied to an office building in a subtropical climate," Applied Energy, Elsevier, vol. 85(6), pages 449-462, June.
    10. Hamed Nabizadeh Rafsanjani & Changbum R. Ahn & Mahmoud Alahmad, 2015. "A Review of Approaches for Sensing, Understanding, and Improving Occupancy-Related Energy-Use Behaviors in Commercial Buildings," Energies, MDPI, vol. 8(10), pages 1-34, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chaudhuri, Tanaya & Soh, Yeng Chai & Li, Hua & Xie, Lihua, 2019. "A feedforward neural network based indoor-climate control framework for thermal comfort and energy saving in buildings," Applied Energy, Elsevier, vol. 248(C), pages 44-53.
    2. Wang, Ziyang & Matsuhashi, Ryuji & Onodera, Hiroshi, 2023. "Intrusive and non-intrusive early warning systems for thermal discomfort by analysis of body surface temperature," Applied Energy, Elsevier, vol. 329(C).
    3. Ghahramani, Ali & Pantelic, Jovan & Lindberg, Casey & Mehl, Matthias & Srinivasan, Karthik & Gilligan, Brian & Arens, Edward, 2018. "Learning occupants’ workplace interactions from wearable and stationary ambient sensing systems," Applied Energy, Elsevier, vol. 230(C), pages 42-51.
    4. Turhan, Cihan & Simani, Silvio & Gokcen Akkurt, Gulden, 2021. "Development of a personalized thermal comfort driven controller for HVAC systems," Energy, Elsevier, vol. 237(C).
    5. Darowicki, K. & Janicka, E. & Mielniczek, M. & Zielinski, A. & Gawel, L. & Mitzel, J. & Hunger, J., 2019. "The influence of dynamic load changes on temporary impedance in hydrogen fuel cells, selection and validation of the electrical equivalent circuit," Applied Energy, Elsevier, vol. 251(C), pages 1-1.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ghahramani, Ali & Pantelic, Jovan & Lindberg, Casey & Mehl, Matthias & Srinivasan, Karthik & Gilligan, Brian & Arens, Edward, 2018. "Learning occupants’ workplace interactions from wearable and stationary ambient sensing systems," Applied Energy, Elsevier, vol. 230(C), pages 42-51.
    2. Sehar, Fakeha & Pipattanasomporn, Manisa & Rahman, Saifur, 2016. "A peak-load reduction computing tool sensitive to commercial building environmental preferences," Applied Energy, Elsevier, vol. 161(C), pages 279-289.
    3. Tzivanidis, C. & Antonopoulos, K.A. & Gioti, F., 2011. "Numerical simulation of cooling energy consumption in connection with thermostat operation mode and comfort requirements for the Athens buildings," Applied Energy, Elsevier, vol. 88(8), pages 2871-2884, August.
    4. Prativa Lamsal & Sushil Bahadur Bajracharya & Hom Bahadur Rijal, 2023. "A Review on Adaptive Thermal Comfort of Office Building for Energy-Saving Building Design," Energies, MDPI, vol. 16(3), pages 1-23, February.
    5. Yan, Huaxia & Pan, Yan & Li, Zhao & Deng, Shiming, 2018. "Further development of a thermal comfort based fuzzy logic controller for a direct expansion air conditioning system," Applied Energy, Elsevier, vol. 219(C), pages 312-324.
    6. Sorrentino, Marco & Rizzo, Gianfranco & Genova, Fernando & Gaspardone, Marco, 2010. "A model for simulation and optimal energy management of Telecom switching plants," Applied Energy, Elsevier, vol. 87(1), pages 259-267, January.
    7. Ghadi, Yazeed Yasin & Rasul, M.G. & Khan, M.M.K., 2016. "Design and development of advanced fuzzy logic controllers in smart buildings for institutional buildings in subtropical Queensland," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 738-744.
    8. Darowicki, K. & Janicka, E. & Mielniczek, M. & Zielinski, A. & Gawel, L. & Mitzel, J. & Hunger, J., 2019. "The influence of dynamic load changes on temporary impedance in hydrogen fuel cells, selection and validation of the electrical equivalent circuit," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    9. Guillén-Lambea, Silvia & Rodríguez-Soria, Beatriz & Marín, José M., 2017. "Comfort settings and energy demand for residential nZEB in warm climates," Applied Energy, Elsevier, vol. 202(C), pages 471-486.
    10. Radhi, Hassan & Eltrapolsi, Ali & Sharples, Stephen, 2009. "Will energy regulations in the Gulf States make buildings more comfortable - A scoping study of residential buildings," Applied Energy, Elsevier, vol. 86(12), pages 2531-2539, December.
    11. Qi, Ronghui & Lu, Lin & Yang, Hongxing & Qin, Fei, 2013. "Investigation on wetted area and film thickness for falling film liquid desiccant regeneration system," Applied Energy, Elsevier, vol. 112(C), pages 93-101.
    12. Gilani, Syed Ihtsham ul Haq & Aris, Mohd Shiraz & Bhaskoro, Petrus Tri, 2014. "Energy saving technique for cooling dominated academic building: Techno-economic analysis of its application," Applied Energy, Elsevier, vol. 132(C), pages 192-199.
    13. Yin, Peng & Xie, Jingchao & Ji, Ying & Liu, Jiaping & Hou, Qixian & Zhao, Shanshan & Jing, Pengfei, 2023. "Winter indoor thermal environment and heating demand of low-quality centrally heated houses in cold climates," Applied Energy, Elsevier, vol. 331(C).
    14. Zheng, Chenxiao & You, Shijun & Zhang, Huan & Zheng, Wandong & Zheng, Xuejing & Ye, Tianzheng & Liu, Zeqin, 2018. "Comparison of air-conditioning systems with bottom-supply and side-supply modes in a typical office room," Applied Energy, Elsevier, vol. 227(C), pages 304-311.
    15. Abdul Mujeebu, Muhammad & Ashraf, Noman & Alsuwayigh, Abdulkarim H., 2016. "Effect of nano vacuum insulation panel and nanogel glazing on the energy performance of office building," Applied Energy, Elsevier, vol. 173(C), pages 141-151.
    16. Rafsanjani, Hamed Nabizadeh & Ghahramani, Ali & Nabizadeh, Amir Hossein, 2020. "iSEA: IoT-based smartphone energy assistant for prompting energy-aware behaviors in commercial buildings," Applied Energy, Elsevier, vol. 266(C).
    17. Xu, Xiaojing & Chen, Chien-fei, 2019. "Energy efficiency and energy justice for U.S. low-income households: An analysis of multifaceted challenges and potential," Energy Policy, Elsevier, vol. 128(C), pages 763-774.
    18. Ahmed, Omar & Sezer, Nurettin & Ouf, Mohamed & Wang, Liangzhu (Leon) & Hassan, Ibrahim Galal, 2023. "State-of-the-art review of occupant behavior modeling and implementation in building performance simulation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    19. Niemelä, Tuomo & Kosonen, Risto & Jokisalo, Juha, 2016. "Cost-optimal energy performance renovation measures of educational buildings in cold climate," Applied Energy, Elsevier, vol. 183(C), pages 1005-1020.
    20. Wang, Ran & Lu, Shilei & Feng, Wei, 2020. "A three-stage optimization methodology for envelope design of passive house considering energy demand, thermal comfort and cost," Energy, Elsevier, vol. 192(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:211:y:2018:i:c:p:41-49. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.