IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v205y2017icp499-510.html
   My bibliography  Save this article

Simulation-driven design of a passive liquid cooling system for a thermoelectric generator

Author

Listed:
  • Deasy, M.J.
  • Baudin, N.
  • O'Shaughnessy, S.M.
  • Robinson, A.J.

Abstract

Active cooling of thermoelectric generators (TEGs) is problematic since mechanical devices such as pumps and fans draw a high proportion of the limited power generated. Increasing the coolant fluid flow rate is typically a scenario of diminishing gains since the increased TEG power can be more than offset by the increase in power required for the fluid mover. Passive air cooling is an option, however the high air-side thermal resistance results in poor TEG power performance and low thermal efficiency. To address these issues, and others, a passive single phase liquid thermosyphon cooling system for use with TEGs has been designed, computationally simulated and experimentally tested. The novelty of the cooling system centres not only on the hot-side heat exchanger design, but also on the use of an open liquid reservoir as a dual-purposed heat store and air-side heat sink. This results in an effective source-to-sink heat exchange system that is entirely passive while providing effective cooling. This work describes the Simulation-Driven Design approach used to design the system for an example of a single TEG, experimental verification of the simulation results and TEG performance characteristics with the new cooling system.

Suggested Citation

  • Deasy, M.J. & Baudin, N. & O'Shaughnessy, S.M. & Robinson, A.J., 2017. "Simulation-driven design of a passive liquid cooling system for a thermoelectric generator," Applied Energy, Elsevier, vol. 205(C), pages 499-510.
    • Handle: RePEc:eee:appene:v:205:y:2017:i:c:p:499-510
    DOI: 10.1016/j.apenergy.2017.07.127
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261917310000
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2017.07.127?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nuwayhid, R.Y. & Hamade, R., 2005. "Design and testing of a locally made loop-type thermosyphonic heat sink for stove-top thermoelectric generators," Renewable Energy, Elsevier, vol. 30(7), pages 1101-1116.
    2. Hsu, Cheng-Ting & Huang, Gia-Yeh & Chu, Hsu-Shen & Yu, Ben & Yao, Da-Jeng, 2011. "An effective Seebeck coefficient obtained by experimental results of a thermoelectric generator module," Applied Energy, Elsevier, vol. 88(12), pages 5173-5179.
    3. Yu, Shuhai & Du, Qing & Diao, Hai & Shu, Gequn & Jiao, Kui, 2015. "Start-up modes of thermoelectric generator based on vehicle exhaust waste heat recovery," Applied Energy, Elsevier, vol. 138(C), pages 276-290.
    4. Rowe, D.M., 1999. "Thermoelectrics, an environmentally-friendly source of electrical power," Renewable Energy, Elsevier, vol. 16(1), pages 1251-1256.
    5. Champier, D. & Bedecarrats, J.P. & Rivaletto, M. & Strub, F., 2010. "Thermoelectric power generation from biomass cook stoves," Energy, Elsevier, vol. 35(2), pages 935-942.
    6. Högblom, Olle & Andersson, Ronnie, 2016. "A simulation framework for prediction of thermoelectric generator system performance," Applied Energy, Elsevier, vol. 180(C), pages 472-482.
    7. Børset, Marit Takla & Wilhelmsen, Øivind & Kjelstrup, Signe & Burheim, Odne Stokke, 2017. "Exploring the potential for waste heat recovery during metal casting with thermoelectric generators: On-site experiments and mathematical modeling," Energy, Elsevier, vol. 118(C), pages 865-875.
    8. Kwan, Trevor Hocksun & Wu, Xiaofeng, 2016. "Power and mass optimization of the hybrid solar panel and thermoelectric generators," Applied Energy, Elsevier, vol. 165(C), pages 297-307.
    9. O’Shaughnessy, S.M. & Deasy, M.J. & Kinsella, C.E. & Doyle, J.V. & Robinson, A.J., 2013. "Small scale electricity generation from a portable biomass cookstove: Prototype design and preliminary results," Applied Energy, Elsevier, vol. 102(C), pages 374-385.
    10. Aranguren, Patricia & Astrain, David & Pérez, Miren Gurutze, 2014. "Computational and experimental study of a complete heat dissipation system using water as heat carrier placed on a thermoelectric generator," Energy, Elsevier, vol. 74(C), pages 346-358.
    11. He, Wei & Wang, Shixue & Yue, Like, 2017. "High net power output analysis with changes in exhaust temperature in a thermoelectric generator system," Applied Energy, Elsevier, vol. 196(C), pages 259-267.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Elghool, Ali & Basrawi, Firdaus & Ibrahim, Thamir Khalil & Ibrahim, Hassan & Ishak, M. & Hazwan bin Yusof, Mohd & Bagaber, Salem Abdullah, 2020. "Multi-objective optimization to enhance the performance of thermo-electric generator combined with heat pipe-heat sink under forced convection," Energy, Elsevier, vol. 208(C).
    2. Merienne, R. & Lynn, J. & McSweeney, E. & O'Shaughnessy, S.M., 2019. "Thermal cycling of thermoelectric generators: The effect of heating rate," Applied Energy, Elsevier, vol. 237(C), pages 671-681.
    3. Mohammadnia, Ali & Ziapour, Behrooz M. & Sedaghati, Farzad & Rosendahl, Lasse & Rezania, Alireza, 2021. "Fan operating condition effect on performance of self- cooling thermoelectric generator system," Energy, Elsevier, vol. 224(C).
    4. Al-Nimr, Moh’d Ahmad & Tashtoush, Bourhan & Hasan, Alabas, 2020. "A novel hybrid solar ejector cooling system with thermoelectric generators," Energy, Elsevier, vol. 198(C).
    5. Li, Yanzhe & Wang, Shixue & Zhao, Yulong & Yue, Like, 2022. "Effect of thermoelectric modules with different characteristics on the performance of thermoelectric generators inserted in the central flow region with porous foam copper," Applied Energy, Elsevier, vol. 327(C).
    6. Mesalam, Ramy & Williams, Hugo R. & Ambrosi, Richard M. & García-Cañadas, Jorge & Stephenson, Keith, 2018. "Towards a comprehensive model for characterising and assessing thermoelectric modules by impedance spectroscopy," Applied Energy, Elsevier, vol. 226(C), pages 1208-1218.
    7. Björn Pfeiffelmann & Ali Cemal Benim & Franz Joos, 2021. "Water-Cooled Thermoelectric Generators for Improved Net Output Power: A Review," Energies, MDPI, vol. 14(24), pages 1-29, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kütt, Lauri & Millar, John & Karttunen, Antti & Lehtonen, Matti & Karppinen, Maarit, 2018. "Thermoelectric applications for energy harvesting in domestic applications and micro-production units. Part I: Thermoelectric concepts, domestic boilers and biomass stoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 519-544.
    2. Sajid, Muhammad & Hassan, Ibrahim & Rahman, Aziz, 2017. "An overview of cooling of thermoelectric devices," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 15-22.
    3. Liao, Xinzhong & Liu, Yuxuan & Ren, Jiahang & Guan, Liuping & Sang, Xuehao & Wang, Bowen & Zhang, Hang & Wang, Qiuwang & Ma, Ting, 2020. "Investigation of a double-PCM-based thermoelectric energy-harvesting device using temperature fluctuations in an ambient environment," Energy, Elsevier, vol. 202(C).
    4. Ding, L.C. & Akbarzadeh, A. & Tan, L., 2018. "A review of power generation with thermoelectric system and its alternative with solar ponds," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 799-812.
    5. Hongkun Lv & Guoneng Li & Youqu Zheng & Jiangen Hu & Jian Li, 2018. "Compact Water-Cooled Thermoelectric Generator (TEG) Based on a Portable Gas Stove," Energies, MDPI, vol. 11(9), pages 1-19, August.
    6. Chetty, Raju & Nagase, Kazuo & Aihara, Makoto & Jood, Priyanka & Takazawa, Hiroyuki & Ohta, Michihiro & Yamamoto, Atsushi, 2020. "Mechanically durable thermoelectric power generation module made of Ni-based alloy as a reference for reliable testing," Applied Energy, Elsevier, vol. 260(C).
    7. Mehetre, Sonam A. & Panwar, N.L. & Sharma, Deepak & Kumar, Himanshu, 2017. "Improved biomass cookstoves for sustainable development: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 672-687.
    8. Lan, Song & Yang, Zhijia & Chen, Rui & Stobart, Richard, 2018. "A dynamic model for thermoelectric generator applied to vehicle waste heat recovery," Applied Energy, Elsevier, vol. 210(C), pages 327-338.
    9. Merienne, R. & Lynn, J. & McSweeney, E. & O'Shaughnessy, S.M., 2019. "Thermal cycling of thermoelectric generators: The effect of heating rate," Applied Energy, Elsevier, vol. 237(C), pages 671-681.
    10. O’Shaughnessy, S.M. & Deasy, M.J. & Kinsella, C.E. & Doyle, J.V. & Robinson, A.J., 2013. "Small scale electricity generation from a portable biomass cookstove: Prototype design and preliminary results," Applied Energy, Elsevier, vol. 102(C), pages 374-385.
    11. O’Shaughnessy, S.M. & Deasy, M.J. & Doyle, J.V. & Robinson, A.J., 2015. "Performance analysis of a prototype small scale electricity-producing biomass cooking stove," Applied Energy, Elsevier, vol. 156(C), pages 566-576.
    12. Sutar, Kailasnath B. & Kohli, Sangeeta & Ravi, M.R. & Ray, Anjan, 2015. "Biomass cookstoves: A review of technical aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1128-1166.
    13. Champier, D. & Bédécarrats, J.P. & Kousksou, T. & Rivaletto, M. & Strub, F. & Pignolet, P., 2011. "Study of a TE (thermoelectric) generator incorporated in a multifunction wood stove," Energy, Elsevier, vol. 36(3), pages 1518-1526.
    14. Li, Guo-neng & Zhang, Shuai & Zheng, You-qu & Zhu, Ling-yun & Guo, Wen-wen, 2018. "Experimental study on a stove-powered thermoelectric generator (STEG) with self starting fan cooling," Renewable Energy, Elsevier, vol. 121(C), pages 502-512.
    15. Young Hoo Cho & Jaehyun Park & Naehyuck Chang & Jaemin Kim, 2020. "Comparison of Cooling Methods for a Thermoelectric Generator with Forced Convection," Energies, MDPI, vol. 13(12), pages 1-19, June.
    16. Massaguer, A. & Massaguer, E. & Comamala, M. & Pujol, T. & Montoro, L. & Cardenas, M.D. & Carbonell, D. & Bueno, A.J., 2017. "Transient behavior under a normalized driving cycle of an automotive thermoelectric generator," Applied Energy, Elsevier, vol. 206(C), pages 1282-1296.
    17. Gou, Xiaolong & Ping, Huifeng & Ou, Qiang & Xiao, Heng & Qing, Shaowei, 2015. "A novel thermoelectric generation system with thermal switch," Applied Energy, Elsevier, vol. 160(C), pages 843-852.
    18. Najjar, Yousef S.H. & Kseibi, Musaab M., 2017. "Thermoelectric stoves for poor deprived regions – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 597-602.
    19. Kwan, Trevor Hocksun & Wu, Xiaofeng & Yao, Qinghe, 2018. "Multi-objective genetic optimization of the thermoelectric system for thermal management of proton exchange membrane fuel cells," Applied Energy, Elsevier, vol. 217(C), pages 314-327.
    20. Ge, Ya & Xiao, Qiyin & Wang, Wenhao & Lin, Yousheng & Huang, Si-Min, 2022. "Design of high-performance photovoltaic-thermoelectric hybrid systems using multi-objective genetic algorithm," Renewable Energy, Elsevier, vol. 200(C), pages 136-145.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:205:y:2017:i:c:p:499-510. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.