IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v138y2015icp183-192.html
   My bibliography  Save this article

Selective catalytic reduction of NO in a reverse-flow reactor: Modelling and experimental validation

Author

Listed:
  • Muñoz, Emilio
  • Marín, Pablo
  • Díez, Fernando V.
  • Ordóñez, Salvador

Abstract

The abatement of nitrogen oxides produced in combustion processes and in the chemical industry requires efficient and reliable technologies capable of fulfilling strict environmental regulations. Selective catalytic reduction (SCR) with ammonia in fixed-bed (monolithic) reactors has stood out among other techniques in the last decades. In this work, the use of reverse-flow reactors, operated under the forced un-steady state generated by the periodic reversal of the flow direction, is studied for improving the SCR performance. This reactor can take advantage of ammonia adsorption in the catalyst to enhance concentration profiles in the reactor, increasing reaction rate, efficiency and reducing the emission of un-reacted ammonia. The process has been studied experimentally in a bench-scale device using a commercial monolithic catalyst. The optimum operating conditions, best ammonia feed configuration (side or central) and capacity of the reactor to deal with feed concentration disturbances is analysed. The experiments have also been used for validating a mathematical model of the reactor based on mass conservation equations, and the model has been used to design a full-size reverse-flow reactor able of operating at industrial conditions.

Suggested Citation

  • Muñoz, Emilio & Marín, Pablo & Díez, Fernando V. & Ordóñez, Salvador, 2015. "Selective catalytic reduction of NO in a reverse-flow reactor: Modelling and experimental validation," Applied Energy, Elsevier, vol. 138(C), pages 183-192.
    • Handle: RePEc:eee:appene:v:138:y:2015:i:c:p:183-192
    DOI: 10.1016/j.apenergy.2014.10.081
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261914011313
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2014.10.081?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Camarillo, Mary Kay & Stringfellow, William T. & Hanlon, Jeremy S. & Watson, Kyle A., 2013. "Investigation of selective catalytic reduction for control of nitrogen oxides in full-scale dairy energy production," Applied Energy, Elsevier, vol. 106(C), pages 328-336.
    2. Roy, Sounak & Hegde, M.S. & Madras, Giridhar, 2009. "Catalysis for NOx abatement," Applied Energy, Elsevier, vol. 86(11), pages 2283-2297, November.
    3. Liang, Zengying & Ma, Xiaoqian & Lin, Hai & Tang, Yuting, 2011. "The energy consumption and environmental impacts of SCR technology in China," Applied Energy, Elsevier, vol. 88(4), pages 1120-1129, April.
    4. Jianzhong, Liu & Ruikun, Wang & Jianfei, Xi & Junhu, Zhou & Kefa, Cen, 2014. "Pilot-scale investigation on slurrying, combustion, and slagging characteristics of coal slurry fuel prepared using industrial wasteliquid," Applied Energy, Elsevier, vol. 115(C), pages 309-319.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jiang, Jibing & Li, Dinggen, 2016. "Theoretical analysis and experimental confirmation of exhaust temperature control for diesel vehicle NOx emissions reduction," Applied Energy, Elsevier, vol. 174(C), pages 232-244.
    2. Dong, Jun & Jeswani, Harish Kumar & Nzihou, Ange & Azapagic, Adisa, 2020. "The environmental cost of recovering energy from municipal solid waste," Applied Energy, Elsevier, vol. 267(C).
    3. Jianzhong, Liu & Ruikun, Wang & Jianfei, Xi & Junhu, Zhou & Kefa, Cen, 2014. "Pilot-scale investigation on slurrying, combustion, and slagging characteristics of coal slurry fuel prepared using industrial wasteliquid," Applied Energy, Elsevier, vol. 115(C), pages 309-319.
    4. Liang, Xingyu & Zhao, Bowen & Zhang, Fei & Liu, Qingling, 2019. "Compact research for maritime selective catalytic reduction reactor based on response surface methodology," Applied Energy, Elsevier, vol. 254(C).
    5. Jang, Hayoung & Jeong, Byongug & Zhou, Peilin & Ha, Seungman & Nam, Dong, 2021. "Demystifying the lifecycle environmental benefits and harms of LNG as marine fuel," Applied Energy, Elsevier, vol. 292(C).
    6. Bai, Y. & Zhou, D.Q. & Zhou, P., 2012. "Modelling and analysis of oil import tariff and stockpile policies for coping with supply disruptions," Applied Energy, Elsevier, vol. 97(C), pages 84-90.
    7. Lv, You & Lv, Xuguang & Fang, Fang & Yang, Tingting & Romero, Carlos E., 2020. "Adaptive selective catalytic reduction model development using typical operating data in coal-fired power plants," Energy, Elsevier, vol. 192(C).
    8. Misyura, S.Y., 2019. "Non-stationary combustion of natural and artificial methane hydrate at heterogeneous dissociation," Energy, Elsevier, vol. 181(C), pages 589-602.
    9. Abu-Jrai, Ahmad M. & Al-Muhtaseb, Ala'a H. & Hasan, Ahmad O., 2017. "Combustion, performance, and selective catalytic reduction of NOx for a diesel engine operated with combined tri fuel (H2, CH4, and conventional diesel)," Energy, Elsevier, vol. 119(C), pages 901-910.
    10. Ayhan, Vezir & Ece, Yılmaz Mert, 2020. "New application to reduce NOx emissions of diesel engines: Electronically controlled direct water injection at compression stroke," Applied Energy, Elsevier, vol. 260(C).
    11. Tan, Peng & Xia, Ji & Zhang, Cheng & Fang, Qingyan & Chen, Gang, 2016. "Modeling and reduction of NOX emissions for a 700 MW coal-fired boiler with the advanced machine learning method," Energy, Elsevier, vol. 94(C), pages 672-679.
    12. Li, Shiyuan & Xu, Mingxin & Jia, Lufei & Tan, Li & Lu, Qinggang, 2016. "Influence of operating parameters on N2O emission in O2/CO2 combustion with high oxygen concentration in circulating fluidized bed," Applied Energy, Elsevier, vol. 173(C), pages 197-209.
    13. Vershinina, Ksenia Yu & Kuznetsov, Genii V. & Strizhak, Pavel A., 2017. "Sawdust as ignition intensifier of coal water slurries containing petrochemicals," Energy, Elsevier, vol. 140(P1), pages 69-77.
    14. Wang, Yi-Shu & Xie, Bai-Chen & Shang, Li-Feng & Li, Wen-Hua, 2013. "Measures to improve the performance of China’s thermal power industry in view of cost efficiency," Applied Energy, Elsevier, vol. 112(C), pages 1078-1086.
    15. Jiao, Jian-Ling & Han, Kuang-Yi & Wu, Gang & Li, Lan-Lan & Wei, Yi-Ming, 2014. "The effect of an SPR on the oil price in China: A system dynamics approach," Applied Energy, Elsevier, vol. 133(C), pages 363-373.
    16. Mianqiang Xue & Bin-Le Lin & Kiyotaka Tsunemi & Kimitaka Minami & Tetsuya Nanba & Tohru Kawamoto, 2021. "Life Cycle Assessment of Nitrogen Circular Economy-Based NO x Treatment Technology," Sustainability, MDPI, vol. 13(14), pages 1-15, July.
    17. Tang, YuTing & Ma, XiaoQian & Lai, ZhiYi & Chen, Yong, 2013. "Energy analysis and environmental impacts of a MSW oxy-fuel incineration power plant in China," Energy Policy, Elsevier, vol. 60(C), pages 132-141.
    18. Chen, Hui & Wang, Jie & Zheng, Yanli & Zhan, Jiao & He, Chenliu & Wang, Qiang, 2018. "Algal biofuel production coupled bioremediation of biomass power plant wastes based on Chlorella sp. C2 cultivation," Applied Energy, Elsevier, vol. 211(C), pages 296-305.
    19. Ahmad O. Hasan & Khamis Essa & Mohamed R. Gomaa, 2022. "Synthesis, Structure Characterization and Study of a New Kind of Catalyst: A Monolith of Nickel Made by Additive Manufacturing Coated with Platinum," Energies, MDPI, vol. 15(20), pages 1-13, October.
    20. Antonov, Dmitri V. & Valiullin, Timur R. & Iegorov, Roman I. & Strizhak, Pavel A., 2017. "Effect of macroscopic porosity onto the ignition of the waste-derived fuel droplets," Energy, Elsevier, vol. 119(C), pages 1152-1158.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:138:y:2015:i:c:p:183-192. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.