IDEAS home Printed from https://ideas.repec.org/a/bla/inecol/v28y2024i6p1755-1770.html

The environmental costs of clean cycles: Quantitative analysis for the case of PVC window profile recycling in Germany

Author

Listed:
  • Sarah Schmidt
  • Thomas Gibon
  • Tomás Navarrete Gutiérrez
  • Katrina‐Magdalena Lindemann
  • David Laner

Abstract

Recycling schemes for long‐lived products are challenged by the presence of “legacy substances,” which have been used in production in the past, but are nowadays classified as substances of concern. This study quantitatively evaluates the trade‐offs between phasing out legacy substances, increasing circularity levels, and reducing life cycle impacts of polyvinylchloride (PVC) window profiles recycling in Germany based on a comprehensive dynamic material and substance flow analysis coupled with a prospective life cycle assessment. Scenario results indicate that although lead had been phased out in virgin PVC by 2015, lead concentrations in end‐of‐life PVC window profiles will remain above 0.3% until the end of the century without a restriction of lead in recycled PVC and will be by factor 3–5 higher compared to a restriction as stipulated by EU 2023/923. However, the latter is associated with lower recycling rates and higher life cycle environmental impacts of PVC window frame waste management, which cannot be fully compensated by the introduction of new waste treatment pathways using currently available technologies. The study serves to introduce a new comprehensive modeling framework, which allows for the consideration of trade‐offs between substance, material, and environmental impact dimensions as a basis for discussing and developing sustainable waste management strategies.

Suggested Citation

  • Sarah Schmidt & Thomas Gibon & Tomás Navarrete Gutiérrez & Katrina‐Magdalena Lindemann & David Laner, 2024. "The environmental costs of clean cycles: Quantitative analysis for the case of PVC window profile recycling in Germany," Journal of Industrial Ecology, Yale University, vol. 28(6), pages 1755-1770, December.
    • Handle: RePEc:bla:inecol:v:28:y:2024:i:6:p:1755-1770
    DOI: 10.1111/jiec.13559
    as

    Download full text from publisher

    File URL: https://doi.org/10.1111/jiec.13559
    Download Restriction: no
    File URL: https://libkey.io/10.1111/jiec.13559?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Edis Glogic & Guido Sonnemann & Steven B. Young, 2021. "Environmental Trade-Offs of Downcycling in Circular Economy: Combining Life Cycle Assessment and Material Circularity Indicator to Inform Circularity Strategies for Alkaline Batteries," Sustainability, MDPI, vol. 13(3), pages 1-12, January.
    2. Nađa Džubur & David Laner, 2018. "Evaluation of Modeling Approaches to Determine End‐of‐Life Flows Associated with Buildings: A Viennese Case Study on Wood and Contaminants," Journal of Industrial Ecology, Yale University, vol. 22(5), pages 1156-1169, October.
    3. Christoph Helbig & Jonas Huether & Charlotte Joachimsthaler & Christian Lehmann & Simone Raatz & Andrea Thorenz & Martin Faulstich & Axel Tuma, 2022. "A terminology for downcycling," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1164-1174, August.
    4. Weston Baxter & Marco Aurisicchio & Peter Childs, 2017. "Contaminated Interaction: Another Barrier to Circular Material Flows," Journal of Industrial Ecology, Yale University, vol. 21(3), pages 507-516, June.
    5. Paul Stegmann & Vassilis Daioglou & Marc Londo & Detlef P. Vuuren & Martin Junginger, 2022. "Plastic futures and their CO2 emissions," Nature, Nature, vol. 612(7939), pages 272-276, December.
    6. Laner, David & Rechberger, Helmut, 2007. "Treatment of cooling appliances: Interrelations between environmental protection, resource conservation, and recovery rates," Resources, Conservation & Recycling, Elsevier, vol. 52(1), pages 136-155.
    7. Marie Kampmann Eriksen & Anders Damgaard & Alessio Boldrin & Thomas Fruergaard Astrup, 2019. "Quality Assessment and Circularity Potential of Recovery Systems for Household Plastic Waste," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 156-168, February.
    8. Jun Nakatani, 2014. "Life Cycle Inventory Analysis of Recycling: Mathematical and Graphical Frameworks," Sustainability, MDPI, vol. 6(9), pages 1-12, September.
    9. Marvin Bachmann & Christian Zibunas & Jan Hartmann & Victor Tulus & Sangwon Suh & Gonzalo Guillén-Gosálbez & André Bardow, 2023. "Towards circular plastics within planetary boundaries," Nature Sustainability, Nature, vol. 6(5), pages 599-610, May.
    10. Stichnothe, Heinz & Azapagic, Adisa, 2013. "Life cycle assessment of recycling PVC window frames," Resources, Conservation & Recycling, Elsevier, vol. 71(C), pages 40-47.
    11. Cecilia Chaine & Andrew S. Hursthouse & Bruce McLean & Iain McLellan & Brian McMahon & Jim McNulty & Jan Miller & Evi Viza, 2022. "Recycling Plastics from WEEE: A Review of the Environmental and Human Health Challenges Associated with Brominated Flame Retardants," IJERPH, MDPI, vol. 19(2), pages 1-27, January.
    12. Nils Johansson & Joakim Krook, 2021. "How to handle the policy conflict between resource circulation and hazardous substances in the use of waste?," Journal of Industrial Ecology, Yale University, vol. 25(4), pages 994-1008, August.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. R. Basuhi & Karan Bhuwalka & Richard Roth & Elsa A. Olivetti, 2024. "Evaluating strategies to increase PET bottle recycling in the United States," Journal of Industrial Ecology, Yale University, vol. 28(4), pages 916-927, August.
    2. Sidra Tul Muntaha & Martina Keitsch, 2025. "A pathway for plastic waste in construction materials," Sustainable Development, John Wiley & Sons, Ltd., vol. 33(1), pages 19-29, February.
    3. Hervé Corvellec & Alison F. Stowell & Nils Johansson, 2022. "Critiques of the circular economy," Journal of Industrial Ecology, Yale University, vol. 26(2), pages 421-432, April.
    4. Bilal Erradhouani & Veronique Coma & Guido Sonnemann & Philippe Loubet, 2026. "Transition to bio-based plastic packaging reveals complex climate–biodiversity trade-offs," Nature Communications, Nature, vol. 17(1), pages 1-12, December.
    5. Elisabeth Van Roijen & Sabbie A. Miller, 2025. "Leveraging biogenic resources to achieve global plastic decarbonization by 2050," Nature Communications, Nature, vol. 16(1), pages 1-13, December.
    6. Meng Jiang & Yuheng Cao & Changgong Liu & Dingjiang Chen & Wenji Zhou & Qian Wen & Hejiang Yu & Jian Jiang & Yucheng Ren & Shanying Hu & Edgar Hertwich & Bing Zhu, 2024. "Tracing fossil-based plastics, chemicals and fertilizers production in China," Nature Communications, Nature, vol. 15(1), pages 1-12, December.
    7. Meret Jürgens & Marina Mudersbach & Hans-Josef Endres, 2025. "Circular Economy Implementation for Plastic Products in SMEs: Framework Development and Practical Application in Case Studies," Circular Economy and Sustainability, Springer, vol. 5(5), pages 4629-4658, October.
    8. Christoph Helbig & Jonas Huether & Charlotte Joachimsthaler & Christian Lehmann & Simone Raatz & Andrea Thorenz & Martin Faulstich & Axel Tuma, 2022. "A terminology for downcycling," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1164-1174, August.
    9. Berfin Bayram & Linda Deserno & Kathrin Greiff, 2024. "Product Quality in the Circular Economy: A Systematic Review of its Definition and Contexts in Scientific Literature," Circular Economy and Sustainability, Springer, vol. 4(4), pages 2713-2747, December.
    10. German Arana‐Landin & Waleska Sigüenza & Beñat Landeta‐Manzano & Iker Laskurain‐Iturbe, 2024. "Circular economy: On the road to ISO 59000 family of standards," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 31(3), pages 1977-2009, May.
    11. Thomas Dobbelstein & Carina Lochner, 2023. "Factors influencing purchase intention for recycled products: A comparative analysis of Germany and South Africa," Sustainable Development, John Wiley & Sons, Ltd., vol. 31(4), pages 2256-2277, August.
    12. Xavier Tanguay & Gatien Geraud Essoua Essoua & Ben Amor, 2021. "Attributional and consequential life cycle assessments in a circular economy with integration of a quality indicator: A case study of cascading wood products," Journal of Industrial Ecology, Yale University, vol. 25(6), pages 1462-1473, December.
    13. Giuseppe Bonifazi & Ludovica Fiore & Riccardo Gasbarrone & Roberta Palmieri & Silvia Serranti, 2023. "Hyperspectral Imaging Applied to WEEE Plastic Recycling: A Methodological Approach," Sustainability, MDPI, vol. 15(14), pages 1-16, July.
    14. Beata Waszczyłko-Miłkowska & Katarzyna Bernat & Krystian Szczepański, 2024. "Assessment of the Quantities of Non-Targeted Materials (Impurities) in Recycled Plastic Packaging Waste to Comply with EU Regulations and Sustainable Waste Management," Sustainability, MDPI, vol. 16(14), pages 1-9, July.
    15. Graziela Darla Araujo Galvão & Steve Evans & Paulo Sergio Scoleze Ferrer & Marly Monteiro de Carvalho, 2022. "Circular business model: Breaking down barriers towards sustainable development," Business Strategy and the Environment, Wiley Blackwell, vol. 31(4), pages 1504-1524, May.
    16. Reinol Josef Compañero & Andreas Feldmann & Peter Samuelsson & Anders Tilliander & Pär Göran Jönsson & Rutger Gyllenram, 2023. "Appraising the value of compositional information and its implications to scrap-based production of steel," Mineral Economics, Springer;Raw Materials Group (RMG);Luleå University of Technology, vol. 36(3), pages 463-480, September.
    17. Żaneta Muranko & Catriona Tassell & Anouk Zeeuw van der Laan & Marco Aurisicchio, 2021. "Characterisation and Environmental Value Proposition of Reuse Models for Fast-Moving Consumer Goods: Reusable Packaging and Products," Sustainability, MDPI, vol. 13(5), pages 1-35, March.
    18. Kai Li & Hauke Ward & Hai Xiang Lin & Arnold Tukker, 2024. "Economic viability requires higher recycling rates for imported plastic waste than expected," Nature Communications, Nature, vol. 15(1), pages 1-9, December.
    19. McLaughlin, Hope & Littlefield, Anna A. & Menefee, Maia & Kinzer, Austin & Hull, Tobias & Sovacool, Benjamin K. & Bazilian, Morgan D. & Kim, Jinsoo & Griffiths, Steven, 2023. "Carbon capture utilization and storage in review: Sociotechnical implications for a carbon reliant world," Renewable and Sustainable Energy Reviews, Elsevier, vol. 177(C).
    20. Baoyu Wang & Ximing Yan & Jinshu Huang & Yaxuan Jing & Shunmugavel Saravanamurugan & Adam F. Lee & Hu Li, 2026. "Tuning selectivity in the direct hydrogenolysis of PET plastic over Co catalysts through interfacial hydrogen spillover," Nature Communications, Nature, vol. 17(1), pages 1-14, December.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:bla:inecol:v:28:y:2024:i:6:p:1755-1770. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: http://www.blackwellpublishing.com/journal.asp?ref=1088-1980 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.