IDEAS home Printed from https://ideas.repec.org/a/spr/opsear/v54y2017i4d10.1007_s12597-017-0309-6.html
   My bibliography  Save this article

A joint economic lot size model for a supplier-manufacturer-retailers supply chain of an agricultural product

Author

Listed:
  • S. M. Shahidul Islam

    (Hajee Mohammad Danesh Science and Technology University
    Universiti Brunei Darussalam)

  • Mohammad Abdul Hoque

    (North South University)

Abstract

Smooth supply of processed agricultural products to the market is necessary for survival of human beings. Minimization of the management cost of these products plays an important role in delivering them to customers with reasonable prices. Although single-manufacturer single-retailer two-tier supply chain (SC) models are available in the literature, there is a lack of a three-tier SC model concerning agricultural products. This study presents a three-tier joint economic lot size SC model of delivering agricultural products, consisting of a single seasonal supplier, a single manufacturer and multiple retailers. The demand of a product is assumed to be a deterministic constant. The objective is to find the number of shipments and shipments sizes in a cycle from the supplier to the recipient to minimize the total cost of ordering, setup, shipment and holding. The model is solved following both the algebraic and the differentiation methods. They are found to provide the same solution theoretically. Also, we develop an algorithm to find integer number of shipments to manufacturer and retailers in obtaining the minimal total cost solution to the problem. A sensitivity analysis on a solution of a numerical problem shows that a manager can control the frequency of shipments with an extra cost.

Suggested Citation

  • S. M. Shahidul Islam & Mohammad Abdul Hoque, 2017. "A joint economic lot size model for a supplier-manufacturer-retailers supply chain of an agricultural product," OPSEARCH, Springer;Operational Research Society of India, vol. 54(4), pages 868-885, December.
    • Handle: RePEc:spr:opsear:v:54:y:2017:i:4:d:10.1007_s12597-017-0309-6
    DOI: 10.1007/s12597-017-0309-6
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s12597-017-0309-6
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s12597-017-0309-6?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ben-Daya, Mohammed & As’ad, Rami & Seliaman, Mohammed, 2013. "An integrated production inventory model with raw material replenishment considerations in a three layer supply chain," International Journal of Production Economics, Elsevier, vol. 143(1), pages 53-61.
    2. Abdelsalam, Hisham M. & Elassal, Magy M., 2014. "Joint economic lot sizing problem for a three—Layer supply chain with stochastic demand," International Journal of Production Economics, Elsevier, vol. 155(C), pages 272-283.
    3. Le Gal, P.-Y. & Lyne, P.W.L. & Meyer, E. & Soler, L.-G., 2008. "Impact of sugarcane supply scheduling on mill sugar production: A South African case study," Agricultural Systems, Elsevier, vol. 96(1-3), pages 64-74, March.
    4. Islam, S.M. Shahidul & Hoque, Md. Abdul & Hamzah, Norhayati, 2017. "Single-supplier single-manufacturer multi-retailer consignment policy for retailers’ generalized demand distributions," International Journal of Production Economics, Elsevier, vol. 184(C), pages 157-167.
    5. Glock, C. H. & Kim, T., 2012. "A joint economic lot sizemodel with returnable transport items," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 59079, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    6. Kim, Taebok & Glock, Christoph H. & Kwon, Yongjang, 2014. "A closed-loop supply chain for deteriorating products under stochastic container return times," Omega, Elsevier, vol. 43(C), pages 30-40.
    7. Khouja, Moutaz, 2003. "Optimizing inventory decisions in a multi-stage multi-customer supply chain," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 39(3), pages 193-208, May.
    8. Bertrand Hellion & Fabien Mangione & Bernard Penz, 2015. "Stability contracts between supplier and retailer: a new lot sizing model," International Journal of Production Research, Taylor & Francis Journals, vol. 53(1), pages 1-12, January.
    9. Sarmah, S.P. & Acharya, D. & Goyal, S.K., 2006. "Buyer vendor coordination models in supply chain management," European Journal of Operational Research, Elsevier, vol. 175(1), pages 1-15, November.
    10. Cárdenas-Barrón, Leopoldo Eduardo, 2007. "Optimizing inventory decisions in a multi-stage multi-customer supply chain: A note," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 43(5), pages 647-654, September.
    11. Kim, T. & Glock, C. H. & Kwon, Y., 2014. "A closed-loop supply chain for deteriorating products under stochastic container return times," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 62024, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    12. Hoque, M.A., 2011. "An optimal solution technique to the single-vendor multi-buyer integrated inventory supply chain by incorporating some realistic factors," European Journal of Operational Research, Elsevier, vol. 215(1), pages 80-88, November.
    13. Ben-Daya, M. & Hariga, M., 2004. "Integrated single vendor single buyer model with stochastic demand and variable lead time," International Journal of Production Economics, Elsevier, vol. 92(1), pages 75-80, November.
    14. Gunasekaran, Angappa & Lai, Kee-hung & Edwin Cheng, T.C., 2008. "Responsive supply chain: A competitive strategy in a networked economy," Omega, Elsevier, vol. 36(4), pages 549-564, August.
    15. Goyal, Suresh K. & Nebebe, Fassil, 2000. "Determination of economic production-shipment policy for a single-vendor-single-buyer system," European Journal of Operational Research, Elsevier, vol. 121(1), pages 175-178, February.
    16. Moncer Hariga & Christoph H. Glock & Taebok Kim, 2016. "Integrated product and container inventory model for a single-vendor single-buyer supply chain with owned and rented returnable transport items," International Journal of Production Research, Taylor & Francis Journals, vol. 54(7), pages 1964-1979, April.
    17. Wang, Chuanxu & Huang, Rongbing & Wei, Qianli, 2015. "Integrated pricing and lot-sizing decision in a two-echelon supply chain with a finite production rate," International Journal of Production Economics, Elsevier, vol. 161(C), pages 44-53.
    18. Hariga, M. & Glock, C. H. & Kim, T., 2016. "Integrated product and container inventory model for a single-vendor-single-buyer supply chain with owned and rented returnable transport items," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 74446, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    19. Glock, C. H., 2012. "The joint economic lot size problem: a review," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 57811, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    20. Moncayo-Martínez, Luis A. & Zhang, David Z., 2013. "Optimising safety stock placement and lead time in an assembly supply chain using bi-objective MAX–MIN ant system," International Journal of Production Economics, Elsevier, vol. 145(1), pages 18-28.
    21. Ben-Daya, M. & Darwish, M. & Ertogral, K., 2008. "The joint economic lot sizing problem: Review and extensions," European Journal of Operational Research, Elsevier, vol. 185(2), pages 726-742, March.
    22. Lee, Wenyih, 2005. "A joint economic lot size model for raw material ordering, manufacturing setup, and finished goods delivering," Omega, Elsevier, vol. 33(2), pages 163-174, April.
    23. Glock, Christoph H., 2012. "The joint economic lot size problem: A review," International Journal of Production Economics, Elsevier, vol. 135(2), pages 671-686.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Makoena Sebatjane & Olufemi Adetunji, 2022. "Optimal inventory replenishment and shipment policies in a three-echelon supply chain for growing items with expiration dates," OPSEARCH, Springer;Operational Research Society of India, vol. 59(3), pages 809-838, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Abdelsalam, Hisham M. & Elassal, Magy M., 2014. "Joint economic lot sizing problem for a three—Layer supply chain with stochastic demand," International Journal of Production Economics, Elsevier, vol. 155(C), pages 272-283.
    2. Meherishi, Lavanya & Narayana, Sushmita A. & Ranjani, K.S., 2021. "Integrated product and packaging decisions with secondary packaging returns and protective packaging management," European Journal of Operational Research, Elsevier, vol. 292(3), pages 930-952.
    3. Wu, Kan & Yuan, Xue-Ming, 2016. "Optimal production-inventory policy for an integrated multi-stage supply chain with time-varying demandAuthor-Name: Zhao, Shi Tao," European Journal of Operational Research, Elsevier, vol. 255(2), pages 364-379.
    4. Sebatjane, Makoena & Adetunji, Olufemi, 2020. "A three-echelon supply chain for economic growing quantity model with price- and freshness-dependent demand: Pricing, ordering and shipment decisions," Operations Research Perspectives, Elsevier, vol. 7(C).
    5. Glock, Christoph H., 2012. "The joint economic lot size problem: A review," International Journal of Production Economics, Elsevier, vol. 135(2), pages 671-686.
    6. Sajadieh, Mohsen S. & Fallahnezhad, Mohammad Saber & Khosravi, Maryam, 2013. "A joint optimal policy for a multiple-suppliers multiple-manufacturers multiple-retailers system," International Journal of Production Economics, Elsevier, vol. 146(2), pages 738-744.
    7. Adeinat, Hamza & Pazhani, Subramanian & Mendoza, Abraham & Ventura, Jose A., 2022. "Coordination of pricing and inventory replenishment decisions in a supply chain with multiple geographically dispersed retailers," International Journal of Production Economics, Elsevier, vol. 248(C).
    8. Chan, Chi Kin & Fang, Fei & Langevin, André, 2018. "Single-vendor multi-buyer supply chain coordination with stochastic demand," International Journal of Production Economics, Elsevier, vol. 206(C), pages 110-133.
    9. AlDurgam, Mohammad & Adegbola, Kehinde & Glock, Christoph H., 2017. "A single-vendor single-manufacturer integrated inventory model with stochastic demand and variable production rate," International Journal of Production Economics, Elsevier, vol. 191(C), pages 335-350.
    10. Beullens, Patrick, 2014. "Revisiting foundations in lot sizing—Connections between Harris, Crowther, Monahan, and Clark," International Journal of Production Economics, Elsevier, vol. 155(C), pages 68-81.
    11. Abedinnia, Hamid & Moghaddamkia, Hoda & Glock, C. H., 2016. "A joint economic lot size model under continuously increasing purchase prices of raw materials," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 82129, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    12. Sajadieh, Mohsen S. & Larsen, Christian, 2015. "A coordinated manufacturer-retailer model under stochastic demand and production rate," International Journal of Production Economics, Elsevier, vol. 168(C), pages 64-70.
    13. Mehmood Khan & Matloub Hussain & Leopoldo Eduardo Cárdenas-Barrón, 2017. "Learning and screening errors in an EPQ inventory model for supply chains with stochastic lead time demands," International Journal of Production Research, Taylor & Francis Journals, vol. 55(16), pages 4816-4832, August.
    14. Hariga, Moncer & Gumus, Mehmet & Daghfous, Abdelkader, 2014. "Storage constrained vendor managed inventory models with unequal shipment frequencies," Omega, Elsevier, vol. 48(C), pages 94-106.
    15. Glock, Christoph H. & Grosse, Eric H., 2021. "The impact of controllable production rates on the performance of inventory systems: A systematic review of the literature," European Journal of Operational Research, Elsevier, vol. 288(3), pages 703-720.
    16. Ben-Daya, Mohammed & As’ad, Rami & Seliaman, Mohammed, 2013. "An integrated production inventory model with raw material replenishment considerations in a three layer supply chain," International Journal of Production Economics, Elsevier, vol. 143(1), pages 53-61.
    17. K. F. Mary Latha & M. Ganesh Kumar & R. Uthayakumar, 2021. "Two echelon economic lot sizing problems with geometric shipment policy backorder price discount and optimal investment to reduce ordering cost," OPSEARCH, Springer;Operational Research Society of India, vol. 58(4), pages 1133-1163, December.
    18. Tarhini, Hussein & Karam, Mario & Jaber, Mohamad Y., 2020. "An integrated single-vendor multi-buyer production inventory model with transshipments between buyers," International Journal of Production Economics, Elsevier, vol. 225(C).
    19. Noblesse, Ann M. & Boute, Robert N. & Lambrecht, Marc R. & Van Houdt, Benny, 2014. "Lot sizing and lead time decisions in production/inventory systems," International Journal of Production Economics, Elsevier, vol. 155(C), pages 351-360.
    20. Faranak Emtehani & Nasim Nahavandi & Farimah Mokhatab Rafiei, 2021. "A joint inventory–finance model for coordinating a capital-constrained supply chain with financing limitations," Financial Innovation, Springer;Southwestern University of Finance and Economics, vol. 7(1), pages 1-39, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:opsear:v:54:y:2017:i:4:d:10.1007_s12597-017-0309-6. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.