IDEAS home Printed from https://ideas.repec.org/a/wly/navres/v55y2008i2p130-141.html
   My bibliography  Save this article

Optimal capacity in a coordinated supply chain

Author

Listed:
  • Xiuli Chao
  • Sridhar Seshadri
  • Michael Pinedo

Abstract

We consider a supply chain in which a retailer faces a stochastic demand, incurs backorder and inventory holding costs and uses a periodic review system to place orders from a manufacturer. The manufacturer must fill the entire order. The manufacturer incurs costs of overtime and undertime if the order deviates from the planned production capacity. We determine the optimal capacity for the manufacturer in case there is no coordination with the retailer as well as in case there is full coordination with the retailer. When there is no coordination the optimal capacity for the manufacturer is found by solving a newsvendor problem. When there is coordination, we present a dynamic programming formulation and establish that the optimal ordering policy for the retailer is characterized by two parameters. The optimal coordinated capacity for the manufacturer can then be obtained by solving a nonlinear programming problem. We present an efficient exact algorithm and a heuristic algorithm for computing the manufacturer's capacity. We discuss the impact of coordination on the supply chain cost as well as on the manufacturer's capacity. We also identify the situations in which coordination is most beneficial. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008

Suggested Citation

  • Xiuli Chao & Sridhar Seshadri & Michael Pinedo, 2008. "Optimal capacity in a coordinated supply chain," Naval Research Logistics (NRL), John Wiley & Sons, vol. 55(2), pages 130-141, March.
    • Handle: RePEc:wly:navres:v:55:y:2008:i:2:p:130-141
    DOI: 10.1002/nav.20271
    as

    Download full text from publisher

    File URL: https://doi.org/10.1002/nav.20271
    Download Restriction: no
    File URL: https://libkey.io/10.1002/nav.20271?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. James R. Bradley & Bruce C. Arntzen, 1999. "The Simultaneous Planning of Production, Capacity, and Inventory in Seasonal Demand Environments," Operations Research, INFORMS, vol. 47(6), pages 795-806, December.
    2. Paul Glasserman & Sridhar Tayur, 1994. "The Stability of a Capacitated, Multi-Echelon Production-Inventory System Under a Base-Stock Policy," Operations Research, INFORMS, vol. 42(5), pages 913-925, October.
    3. Tayur, S.R., 1992. "Computing the Optimal Policy for Capacitated Inventory Models," GSIA Working Papers 1992-07, Carnegie Mellon University, Tepper School of Business.
    4. Roman Kapuściński & Sridhar Tayur, 1998. "A Capacitated Production-Inventory Model with Periodic Demand," Operations Research, INFORMS, vol. 46(6), pages 899-911, December.
    5. Eric Logan Huggins & Tava Lennon Olsen, 2003. "Supply Chain Management with Guaranteed Delivery," Management Science, INFORMS, vol. 49(9), pages 1154-1167, September.
    6. A. Federgruen & P. Zipkin, 1986. "An Inventory Model with Limited Production Capacity and Uncertain Demands II. The Discounted-Cost Criterion," Mathematics of Operations Research, INFORMS, vol. 11(2), pages 208-215, May.
    7. Hau L. Lee & V. Padmanabhan & Seungjin Whang, 1997. "Information Distortion in a Supply Chain: The Bullwhip Effect," Management Science, INFORMS, vol. 43(4), pages 546-558, April.
    8. A. Federgruen & P. Zipkin, 1986. "An Inventory Model with Limited Production Capacity and Uncertain Demands I. The Average-Cost Criterion," Mathematics of Operations Research, INFORMS, vol. 11(2), pages 193-207, May.
    9. Matthew J. Sobel, 1969. "Production Smoothing with Stochastic Demand I: Finite Horizon Case," Management Science, INFORMS, vol. 16(3), pages 195-207, November.
    10. Jan A. Van Mieghem, 2003. "Commissioned Paper: Capacity Management, Investment, and Hedging: Review and Recent Developments," Manufacturing & Service Operations Management, INFORMS, vol. 5(4), pages 269-302, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jian Yang & Zhaoqiong Qin, 2007. "Capacitated Production Control with Virtual Lateral Transshipments," Operations Research, INFORMS, vol. 55(6), pages 1104-1119, December.
    2. Wang, Xun & Disney, Stephen M. & Ponte, Borja, 2023. "On the stationary stochastic response of an order-constrained inventory system," European Journal of Operational Research, Elsevier, vol. 304(2), pages 543-557.
    3. Jian Yang & Xiangtong Qi & Yusen Xia, 2005. "A Production-Inventory System with Markovian Capacity and Outsourcing Option," Operations Research, INFORMS, vol. 53(2), pages 328-349, April.
    4. Woonghee Tim Huh & Ganesh Janakiraman & Mahesh Nagarajan, 2016. "Capacitated Multiechelon Inventory Systems: Policies and Bounds," Manufacturing & Service Operations Management, INFORMS, vol. 18(4), pages 570-584, October.
    5. Ioannis Ch. Paschalidis & Yong Liu, 2003. "Large Deviations-Based Asymptotics for Inventory Control in Supply Chains," Operations Research, INFORMS, vol. 51(3), pages 437-460, June.
    6. Xiuli Chao & Xiting Gong & Cong Shi & Chaolin Yang & Huanan Zhang & Sean X. Zhou, 2018. "Approximation Algorithms for Capacitated Perishable Inventory Systems with Positive Lead Times," Management Science, INFORMS, vol. 64(11), pages 5038-5061, November.
    7. Xinxin Hu & Izak Duenyas & Roman Kapuscinski, 2008. "Optimal Joint Inventory and Transshipment Control Under Uncertain Capacity," Operations Research, INFORMS, vol. 56(4), pages 881-897, August.
    8. Rodney P. Parker & Roman Kapuściński, 2011. "Managing a Noncooperative Supply Chain with Limited Capacity," Operations Research, INFORMS, vol. 59(4), pages 866-881, August.
    9. Feng Cheng* & Markus Ettl & Yingdong Lu & David D. Yao, 2012. "A Production–Inventory Model for a Push–Pull Manufacturing System with Capacity and Service Level Constraints," Production and Operations Management, Production and Operations Management Society, vol. 21(4), pages 668-681, July.
    10. Yang, Jian & Qi, Xiangtong & Xia, Yusen & Yu, Gang, 2006. "Inventory control with Markovian capacity and the option of order rejection," European Journal of Operational Research, Elsevier, vol. 174(1), pages 622-645, October.
    11. Klosterhalfen, Steffen T. & Holzhauer, Falk & Fleischmann, Moritz, 2018. "Control of a continuous production inventory system with production quantity restrictions," European Journal of Operational Research, Elsevier, vol. 268(2), pages 569-581.
    12. Weidong Chen & Cong Shi & Izak Duenyas, 2020. "Optimal Learning Algorithms for Stochastic Inventory Systems with Random Capacities," Production and Operations Management, Production and Operations Management Society, vol. 29(7), pages 1624-1649, July.
    13. Gavirneni, Srinagesh, 2006. "Price fluctuations, information sharing, and supply chain performance," European Journal of Operational Research, Elsevier, vol. 174(3), pages 1651-1663, November.
    14. Woonghee Tim Huh & Ganesh Janakiraman & Mahesh Nagarajan, 2010. "Technical Note ---Capacitated Serial Inventory Systems: Sample Path and Stability Properties Under Base-Stock Policies," Operations Research, INFORMS, vol. 58(4-part-1), pages 1017-1022, August.
    15. Rodney P. Parker & Roman Kapuscinski, 2004. "Optimal Policies for a Capacitated Two-Echelon Inventory System," Operations Research, INFORMS, vol. 52(5), pages 739-755, October.
    16. Saif Benjaafar & David Chen & Rowan Wang, 2017. "Managing Production-Inventory Systems with Scarce Resources," Manufacturing & Service Operations Management, INFORMS, vol. 19(2), pages 216-229, May.
    17. Qingkai Ji & Lijun Sun & Xiangpei Hu & Jing Hou, 2016. "Optimal policies of a two-echelon serial inventory system with general limited capacities," International Journal of Production Research, Taylor & Francis Journals, vol. 54(20), pages 6142-6155, October.
    18. Juzhi Zhang & Tsan‐Ming Choi & T. C. E. Cheng, 2020. "Stochastic production capacity: A bane or a boon for quick response supply chains?," Naval Research Logistics (NRL), John Wiley & Sons, vol. 67(2), pages 126-146, March.
    19. Retsef Levi & Robin O. Roundy & David B. Shmoys & Van Anh Truong, 2008. "Approximation Algorithms for Capacitated Stochastic Inventory Control Models," Operations Research, INFORMS, vol. 56(5), pages 1184-1199, October.
    20. Li Chen & Hau L. Lee, 2012. "Bullwhip Effect Measurement and Its Implications," Operations Research, INFORMS, vol. 60(4), pages 771-784, August.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:navres:v:55:y:2008:i:2:p:130-141. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)1520-6750 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.