IDEAS home Printed from https://ideas.repec.org/a/wly/jnljam/v2025y2025i1n2404681.html

Optimization Design of Nonpulsating, Equal Contact Stress Guide Curves for Internal Curve Radial Piston Motors

Author

Listed:
  • Hongbin Qiang
  • Jiajun Shao
  • Shaopeng Kang
  • Kailei Liu
  • Dongming Li
  • Xiansheng Ke

Abstract

To address the issues of short lifespan and high pulsation rates in existing radial piston hydraulic motors, this study focused on the design and optimization of the guide curve based on contact stress analysis. Initially, a thorough mechanical analysis and mathematical modeling of the piston rollers were conducted, taking into account friction forces. Using a six‐action, eight‐piston motor as a case study, the movement patterns of the pistons were extensively analyzed, and the corresponding torque was calculated. An extended acceleration zone approach was employed to develop a mathematical model of the guide curve, aimed at achieving constant contact stress without pulsation. Finally, the nondominated sorting genetic algorithm (NSGA‐II) was utilized to optimize the lifespan of the guide, resulting in a guide curve that ensures a longer operational lifespan and low pulsation rate. This design method for the guide curve offers a critical reference for optimizing the design of internal curve radial piston motors, which require stringent control over both lifespan and pulsation rates.

Suggested Citation

  • Hongbin Qiang & Jiajun Shao & Shaopeng Kang & Kailei Liu & Dongming Li & Xiansheng Ke, 2025. "Optimization Design of Nonpulsating, Equal Contact Stress Guide Curves for Internal Curve Radial Piston Motors," Journal of Applied Mathematics, John Wiley & Sons, vol. 2025(1).
    • Handle: RePEc:wly:jnljam:v:2025:y:2025:i:1:n:2404681
    DOI: 10.1155/jama/2404681
    as

    Download full text from publisher

    File URL: https://doi.org/10.1155/jama/2404681
    Download Restriction: no
    File URL: https://libkey.io/10.1155/jama/2404681?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Cui, Yunfei & Geng, Zhiqiang & Zhu, Qunxiong & Han, Yongming, 2017. "Review: Multi-objective optimization methods and application in energy saving," Energy, Elsevier, vol. 125(C), pages 681-704.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. You, Junyu & Ampomah, William & Sun, Qian, 2020. "Co-optimizing water-alternating-carbon dioxide injection projects using a machine learning assisted computational framework," Applied Energy, Elsevier, vol. 279(C).
    2. Changyu Zhou & Guohe Huang & Jiapei Chen, 2019. "A Type-2 Fuzzy Chance-Constrained Fractional Integrated Modeling Method for Energy System Management of Uncertainties and Risks," Energies, MDPI, vol. 12(13), pages 1-21, June.
    3. Weiwei Cui & Biao Lu, 2020. "A Bi-Objective Approach to Minimize Makespan and Energy Consumption in Flow Shops with Peak Demand Constraint," Sustainability, MDPI, vol. 12(10), pages 1-22, May.
    4. Nour Eddine, A. & Chalet, D. & Faure, X. & Aixala, L. & Chessé, P., 2018. "Effect of engine exhaust gas pulsations on the performance of a thermoelectric generator for wasted heat recovery: An experimental and analytical investigation," Energy, Elsevier, vol. 162(C), pages 715-727.
    5. Nizami, M.S.H. & Hossain, M.J. & Amin, B.M. Ruhul & Fernandez, Edstan, 2020. "A residential energy management system with bi-level optimization-based bidding strategy for day-ahead bi-directional electricity trading," Applied Energy, Elsevier, vol. 261(C).
    6. Tan, Qianwen & Siroux, Monica, 2025. "Evaluation and optimization of PCM-integrated walls: Energy, exergy, environmental, and economic perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 222(C).
    7. Karimi, Hamid & Jadid, Shahram, 2020. "Optimal energy management for multi-microgrid considering demand response programs: A stochastic multi-objective framework," Energy, Elsevier, vol. 195(C).
    8. Petrelli, Marina & Fioriti, Davide & Berizzi, Alberto & Bovo, Cristian & Poli, Davide, 2021. "A novel multi-objective method with online Pareto pruning for multi-year optimization of rural microgrids," Applied Energy, Elsevier, vol. 299(C).
    9. Deng, Yuanwang & Liu, Huawei & Zhao, Xiaohuan & E, Jiaqiang & Chen, Jianmei, 2018. "Effects of cold start control strategy on cold start performance of the diesel engine based on a comprehensive preheat diesel engine model," Applied Energy, Elsevier, vol. 210(C), pages 279-287.
    10. Sarjiya, & Budi, Rizki Firmansyah Setya & Hadi, Sasongko Pramono, 2019. "Game theory for multi-objective and multi-period framework generation expansion planning in deregulated markets," Energy, Elsevier, vol. 174(C), pages 323-330.
    11. Yang, Kun & Zhang, Mingming & Yang, Shanghui & Song, Yuwei & Dong, Xinhui & Deng, Yanfei & Deng, Xiaowei, 2025. "Pareto frontier for multi-objective wind farm layout optimization balancing power production and turbine fatigue life," Renewable Energy, Elsevier, vol. 252(C).
    12. Xiongfeng Pan & Shucen Guo, 2025. "Dual-objective optimization of a green closed-loop supply chain in steel industry considering quantity discount," Annals of Operations Research, Springer, vol. 355(2), pages 1989-2015, December.
    13. Máximo Méndez & Mariano Frutos & Fabio Miguel & Ricardo Aguasca-Colomo, 2020. "TOPSIS Decision on Approximate Pareto Fronts by Using Evolutionary Algorithms: Application to an Engineering Design Problem," Mathematics, MDPI, vol. 8(11), pages 1-27, November.
    14. Zhou, Yu & Meng, Kai & Liu, Wei & Chen, Ke & Chen, Wenshang & Zhang, Ning & Chen, Ben, 2024. "Multi-objective optimization of comprehensive performance enhancement for proton exchange membrane fuel cell based on machine learning," Renewable Energy, Elsevier, vol. 232(C).
    15. Marcin Jankowski & Aleksandra Borsukiewicz, 2020. "A Novel Exergy Indicator for Maximizing Energy Utilization in Low-Temperature ORC," Energies, MDPI, vol. 13(7), pages 1-20, April.
    16. Li, Nianqi & Chen, Jian & Cheng, Tao & Klemeš, Jiří Jaromír & Varbanov, Petar Sabev & Wang, Qiuwang & Yang, Weisheng & Liu, Xia & Zeng, Min, 2020. "Analysing thermal-hydraulic performance and energy efficiency of shell-and-tube heat exchangers with longitudinal flow based on experiment and numerical simulation," Energy, Elsevier, vol. 202(C).
    17. Han, Dandan & E, Jiaqiang & Deng, Yuanwang & Chen, Jingwei & Leng, Erwei & Liao, Gaoliang & Zhao, Xiaohuan & Feng, Changling & Zhang, Feng, 2021. "A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    18. You, Huailiang & Han, Jitian & Liu, Yang & Chen, Changnian & Ge, Yi, 2020. "4E analysis and multi-objective optimization of a micro poly-generation system based on SOFC/MGT/MED and organic steam ejector refrigerator," Energy, Elsevier, vol. 206(C).
    19. Yin, Qian & Du, Wen-Jing & Cheng, Lin, 2017. "Optimization design of heat recovery systems on rotary kilns using genetic algorithms," Applied Energy, Elsevier, vol. 202(C), pages 153-168.
    20. Nizami, Sohrab & Tushar, Wayes & Hossain, M.J. & Yuen, Chau & Saha, Tapan & Poor, H. Vincent, 2022. "Transactive energy for low voltage residential networks: A review," Applied Energy, Elsevier, vol. 323(C).

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:jnljam:v:2025:y:2025:i:1:n:2404681. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://onlinelibrary.wiley.com/journal/4185 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.