IDEAS home Printed from https://ideas.repec.org/a/spr/ijsaem/v12y2021i5d10.1007_s13198-021-01169-w.html
   My bibliography  Save this article

Sustainable and flexible production system for a deteriorating item with quality consideration

Author

Listed:
  • Rini

    (New Academic Block University of Delhi)

  • Priyamvada

    (New Academic Block University of Delhi)

  • Chandra K. Jaggi

    (New Academic Block University of Delhi)

Abstract

With continuously evolving and unpredictable markets, manufacturing firms are sorting to different interventions so that an optimal utilization of resources can be attained. One factor with forever focus of production managers is the demand variation. The efficient models can no longer rely on a constant production rate and non-agile systems. Thus, the objective of the presented model is to provide an optimum production schedule for a deteriorating item. The production rate is variable and the production process is unreliable. Keeping in mind the value of customer satisfaction in long run, produced units are screened to segregate items which do not conform to required quality standards. Realistically, unit production cost is assumed to be a function of production rate. Further, due to increased environmental concerns and government regulations, the manufacturer takes into account the effect of carbon emissions. An algorithm has been developed to provide the optimum values of production rate, selling price and non-production cycle duration. The presented model has been supported with numerical and sensitivity analyses.

Suggested Citation

  • Rini & Priyamvada & Chandra K. Jaggi, 2021. "Sustainable and flexible production system for a deteriorating item with quality consideration," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(5), pages 951-960, October.
    • Handle: RePEc:spr:ijsaem:v:12:y:2021:i:5:d:10.1007_s13198-021-01169-w
    DOI: 10.1007/s13198-021-01169-w
    as

    Download full text from publisher

    File URL: http://link.springer.com/10.1007/s13198-021-01169-w
    File Function: Abstract
    Download Restriction: Access to the full text of the articles in this series is restricted.
    File URL: https://libkey.io/10.1007/s13198-021-01169-w?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hua, Guowei & Cheng, T.C.E. & Wang, Shouyang, 2011. "Managing carbon footprints in inventory management," International Journal of Production Economics, Elsevier, vol. 132(2), pages 178-185, August.
    2. Xiao, Tiaojun & Xu, Tiantian, 2013. "Coordinating price and service level decisions for a supply chain with deteriorating item under vendor managed inventory," International Journal of Production Economics, Elsevier, vol. 145(2), pages 743-752.
    3. Mitali Sarkar & Byung Do Chung, 2020. "Flexible work-in-process production system in supply chain management under quality improvement," International Journal of Production Research, Taylor & Francis Journals, vol. 58(13), pages 3821-3838, July.
    4. Glock, C. H. & Grosse, E. H., 2020. "The impact of controllable production rates on the performance of inventory systems: A systematic review of the literature," Publications of Darmstadt Technical University, Institute for Business Studies (BWL) 123183, Darmstadt Technical University, Department of Business Administration, Economics and Law, Institute for Business Studies (BWL).
    5. M. Palanivel & R. Uthayakumar, 2017. "A production-inventory model with promotional effort, variable production cost and probabilistic deterioration," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 8(1), pages 290-300, January.
    6. Salameh, M. K. & Jaber, M. Y., 2000. "Economic production quantity model for items with imperfect quality," International Journal of Production Economics, Elsevier, vol. 64(1-3), pages 59-64, March.
    7. Kung-Jeng Wang & Yu-Siang Lin, 2012. "Optimal inventory replenishment strategy for deteriorating items in a demand-declining market with the retailer’s price manipulation," Annals of Operations Research, Springer, vol. 201(1), pages 475-494, December.
    8. B.C. Giri & H. Pal & T. Maiti, 2017. "A vendor-buyer supply chain model for time-dependent deteriorating item with preservation technology investment," International Journal of Mathematics in Operational Research, Inderscience Enterprises Ltd, vol. 10(4), pages 431-449.
    9. Rabbani, Masoud & Pourmohammad Zia, Nadia & Rafiei, Hamed, 2016. "Joint optimal dynamic pricing and replenishment policies for items with simultaneous quality and physical quantity deterioration," Applied Mathematics and Computation, Elsevier, vol. 287, pages 149-160.
    10. Bikash Koli Dey & Sarla Pareek & Muhammad Tayyab & Biswajit Sarkar, 2021. "Autonomation policy to control work-in-process inventory in a smart production system," International Journal of Production Research, Taylor & Francis Journals, vol. 59(4), pages 1258-1280, February.
    11. Evan L. Porteus, 1986. "Optimal Lot Sizing, Process Quality Improvement and Setup Cost Reduction," Operations Research, INFORMS, vol. 34(1), pages 137-144, February.
    12. Ajay Singh Yadav & Anupam Swami, 2019. "A volume flexible two-warehouse model with fluctuating demand and holding cost under inflation," International Journal of Procurement Management, Inderscience Enterprises Ltd, vol. 12(4), pages 441-456.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Majid Heidari & Masoud Rabbani, 2023. "Leagile sustainable supply chain network design considering disruption risk by C-Var approach: a case study," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 14(3), pages 1062-1088, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bimal Kumar Sett & Bikash Koli Dey & Biswajit Sarkar, 2020. "Autonomated Inspection Policy for Smart Factory—An Improved Approach," Mathematics, MDPI, vol. 8(10), pages 1-19, October.
    2. Priyamvada & Prerna Gautam & Aditi Khanna, 2021. "Sustainable production strategies for deteriorating and imperfect quality items with an investment in preservation technology," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 12(5), pages 910-918, October.
    3. Hsu, Jia-Tzer & Hsu, Lie-Fern, 2013. "An EOQ model with imperfect quality items, inspection errors, shortage backordering, and sales returns," International Journal of Production Economics, Elsevier, vol. 143(1), pages 162-170.
    4. Sher, Mikhail M. & Kim, Seung-Lae & Banerjee, Avijit & Paz, Michael T., 2018. "A supply chain coordination mechanism for common items subject to failure in the electronics, defense, and medical industries," International Journal of Production Economics, Elsevier, vol. 203(C), pages 164-173.
    5. Tien-Yu Lin & Kuo-Lung Hou, 2015. "An imperfect quality economic order quantity with advanced receiving," TOP: An Official Journal of the Spanish Society of Statistics and Operations Research, Springer;Sociedad de Estadística e Investigación Operativa, vol. 23(2), pages 535-551, July.
    6. Bikash Koli Dey & Hyesung Seok, 2024. "Intelligent inventory management with autonomation and service strategy," Journal of Intelligent Manufacturing, Springer, vol. 35(1), pages 307-330, January.
    7. Wang, Chih-Hsiung, 2005. "Integrated production and product inspection policy for a deteriorating production system," International Journal of Production Economics, Elsevier, vol. 95(1), pages 123-134, January.
    8. Yoo, Seung Ho & Kim, DaeSoo & Park, Myung-Sub, 2009. "Economic production quantity model with imperfect-quality items, two-way imperfect inspection and sales return," International Journal of Production Economics, Elsevier, vol. 121(1), pages 255-265, September.
    9. Dipak Barman & Gour Chandra Mahata, 2022. "Two-echelon production inventory model with imperfect quality items with ordering cost reduction depending on controllable lead time," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(5), pages 2656-2671, October.
    10. Noura Yassine, 2020. "A sustainable economic production model: effects of quality and emissions tax from transportation," Annals of Operations Research, Springer, vol. 290(1), pages 73-94, July.
    11. Nasr, Walid W. & Maddah, Bacel & Salameh, Moueen K., 2013. "EOQ with a correlated binomial supply," International Journal of Production Economics, Elsevier, vol. 144(1), pages 248-255.
    12. Subhendu Ruidas & Mijanur Rahaman Seikh & Prasun Kumar Nayak, 2020. "An EPQ model with stock and selling price dependent demand and variable production rate in interval environment," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(2), pages 385-399, April.
    13. Ashoke Kumar Bera & Dipak Kumar Jana, 2017. "Multi-item imperfect production inventory model in Bi-fuzzy environments," OPSEARCH, Springer;Operational Research Society of India, vol. 54(2), pages 260-282, June.
    14. Harun Öztürk, 2019. "Modeling an inventory problem with random supply, inspection and machine breakdown," OPSEARCH, Springer;Operational Research Society of India, vol. 56(2), pages 497-527, June.
    15. Ivan Darma Wangsa & Hui Ming Wee & Shih-Hsien Tseng, 2019. "A coordinated vendor–buyer system considering loss and damage claims, insurance cost and stochastic lead time," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 10(3), pages 384-398, June.
    16. Oshmita Dey, 2019. "A fuzzy random integrated inventory model with imperfect production under optimal vendor investment," Operational Research, Springer, vol. 19(1), pages 101-115, March.
    17. Bouslah, Bassem & Gharbi, Ali & Pellerin, Robert, 2013. "Joint optimal lot sizing and production control policy in an unreliable and imperfect manufacturing system," International Journal of Production Economics, Elsevier, vol. 144(1), pages 143-156.
    18. Liang-Yuh Ouyang & Chun-Tao Chang & Philip Shum, 2012. "The EOQ with defective items and partially permissible delay in payments linked to order quantity derived algebraically," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 20(1), pages 141-160, March.
    19. Liao, Gwo-Liang & Chen, Yen Hung & Sheu, Shey-Huei, 2009. "Optimal economic production quantity policy for imperfect process with imperfect repair and maintenance," European Journal of Operational Research, Elsevier, vol. 195(2), pages 348-357, June.
    20. Kevin Hsu, Wen-Kai & Yu, Hong-Fwu, 2009. "EOQ model for imperfective items under a one-time-only discount," Omega, Elsevier, vol. 37(5), pages 1018-1026, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:spr:ijsaem:v:12:y:2021:i:5:d:10.1007_s13198-021-01169-w. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Sonal Shukla or Springer Nature Abstracting and Indexing (email available below). General contact details of provider: http://www.springer.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.