IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i14p10897-d1191809.html

An Experimental Study of Operating Range, Combustion and Emission Characteristics in an RCCI Engine Fueled with Iso-Propanol/n-Heptane

Author

Listed:
  • Serdar Halis

    (Department of Automotive Engineering, Faculty of Technology, Pamukkale University, Denizli 20160, Turkey)

Abstract

Recently, studies have been carried out using environmentally sustainable technologies with more efficient energy conversion to fulfill emission requirements. One of these technologies, reactivity controlled compression ignition (RCCI), is a low-temperature combustion mode and has a dual fuel strategy. The controllability of combustion, high thermal efficiency and low nitrogen oxide (NO x ) and soot emissions are some of the most prominent advantages of this combustion mode. In this study, the effects of the premixed ratio (PR) and intake air temperature (IAT) on the operating range, combustion characteristics and emissions were investigated experimentally. In the experiments, iso-propanol and n-heptane were used as fuels. The experiments were carried out for two different case studies. In the first case, the experiments were performed at a 50 °C intake air temperature and three different premix ratios (PR25, PR50, PR75). The minimum brake-specific fuel consumption (BSFC) was 268 g/kWh and the widest operating range was obtained with PR25. In addition, the lowest emission values in NO x , hydrocarbon (HC) and carbon monoxide (CO) emission formation were recorded with the use of PR25 fuel. In the other case, experiments were conducted at three different intake air temperatures (30 °C, 50 °C, 70 °C) with PR50. The minimum BSFC was measured as 268 g/kWh and the widest operating range was observed at a 70 °C intake air temperature. At the same time, the lowest NO x emission values were obtained at a 30 °C intake air temperature. The maximum HC emission was determined as 586 ppm at a 30 °C intake air temperature. In addition, the minimum CO emission was measured as 0.142% by volume at a 70 °C intake air temperature.

Suggested Citation

  • Serdar Halis, 2023. "An Experimental Study of Operating Range, Combustion and Emission Characteristics in an RCCI Engine Fueled with Iso-Propanol/n-Heptane," Sustainability, MDPI, vol. 15(14), pages 1-24, July.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:14:p:10897-:d:1191809
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/14/10897/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/14/10897/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Singh, Akhilendra Pratap & Kumar, Vikram & Agarwal, Avinash Kumar, 2020. "Evaluation of comparative engine combustion, performance and emission characteristics of low temperature combustion (PCCI and RCCI) modes," Applied Energy, Elsevier, vol. 278(C).
    2. Calam, Alper & Solmaz, Hamit & Yılmaz, Emre & İçingür, Yakup, 2019. "Investigation of effect of compression ratio on combustion and exhaust emissions in A HCCI engine," Energy, Elsevier, vol. 168(C), pages 1208-1216.
    3. Kakoee, A. & Bakhshan, Y. & Gharehghani, A. & Salahi, M.M., 2019. "Numerical comparative study of hydrogen addition on combustion and emission characteristics of a natural-gas/dimethyl-ether RCCI engine with pre-chamber," Energy, Elsevier, vol. 186(C).
    4. Li, Jing & Yang, Wenming & Zhou, Dezhi, 2017. "Review on the management of RCCI engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 65-79.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Calam, Alper & Ali, Radhwan & Solmaz, Hamit & Yücesu, H. Serdar, 2024. "An experimental evaluation of TiO2 nanoadditive for HCCI engines running on ABE fuel," Energy, Elsevier, vol. 313(C).
    2. Halis, Serdar & Kocakulak, Tolga, 2024. "RSM based optimization of lambda and mixed fuel concentration parameters of an LTC mode engine," Energy, Elsevier, vol. 306(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhao, Wenbin & Mi, Shijie & Wu, Haoqing & Zhang, Yaoyuan & He, Zhuoyao & Qian, Yong & Lu, Xingcai, 2022. "Towards a comprehensive understanding of mode transition between biodiesel-biobutanol dual-fuel ICCI low temperature combustion and conventional CI combustion - Part ΙΙ: A system optimization at low load," Energy, Elsevier, vol. 241(C).
    2. Ali, Radhwan & Yücesu, H. Serdar & Calam, Alper & Solmaz, Hamit, 2025. "Detailed experimental analysis of combustion characteristics of port fuel injected HCCI engine with n-butanol DEE blends for emission reduction," Energy, Elsevier, vol. 333(C).
    3. Paykani, Amin & Garcia, Antonio & Shahbakhti, Mahdi & Rahnama, Pourya & Reitz, Rolf D., 2021. "Reactivity controlled compression ignition engine: Pathways towards commercial viability," Applied Energy, Elsevier, vol. 282(PA).
    4. Kale, Aneesh Vijay & Krishnasamy, Anand, 2023. "Experimental study of homogeneous charge compression ignition combustion in a light-duty diesel engine fueled with isopropanol–gasoline blends," Energy, Elsevier, vol. 264(C).
    5. K. M. V. Ravi Teja & P. Issac Prasad & K. Vijaya Kumar Reddy & N. R. Banapurmath & Manzoore Elahi M. Soudagar & T. M. Yunus Khan & Irfan Anjum Badruddin, 2021. "Influence of Combustion Chamber Shapes and Nozzle Geometry on Performance, Emission, and Combustion Characteristics of CRDI Engine Powered with Biodiesel Blends," Sustainability, MDPI, vol. 13(17), pages 1-19, August.
    6. Shi, Zhongrui & Qian, Yong & Lu, Xingcai, 2025. "Combustion performance in mode transition of methanol-diesel intelligent charge compression ignition under high methanol energy ratio at low-to-medium loads," Energy, Elsevier, vol. 339(C).
    7. Li, Zilong & Zhang, Yaoyuan & Huang, Guan & Zhao, Wenbin & He, Zhuoyao & Qian, Yong & Lu, Xingcai, 2020. "Control of intake boundary conditions for enabling clean combustion in variable engine conditions under intelligent charge compression ignition (ICCI) mode," Applied Energy, Elsevier, vol. 274(C).
    8. Xie, Bo & Peng, Qingguo & E, Jiaqiang & Tu, Yaojie & Wei, Jia & Tang, Shihao & Song, Yangyang & Fu, Guang, 2022. "Effects of CO addition and multi-factors optimization on hydrogen/air combustion characteristics and thermal performance based on grey relational analysis," Energy, Elsevier, vol. 255(C).
    9. García, Antonio & Monsalve-Serrano, Javier & Martinez-Boggio, Santiago & Gaillard, Patrick, 2021. "Emissions reduction by using e-components in 48 V mild hybrid trucks under dual-mode dual-fuel combustion," Applied Energy, Elsevier, vol. 299(C).
    10. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    11. Kale, Aneesh Vijay & Krishnasamy, Anand, 2023. "Numerical investigation on selecting appropriate piston bowl geometry and compression ratio for gasoline-fuelled homogeneous charge compression ignited light-duty diesel engine," Energy, Elsevier, vol. 282(C).
    12. Kocakulak, Tolga & Babagiray, Mustafa & Nacak, Çağatay & Safieddin Ardebili, Seyed Mohammad & Calam, Alper & Solmaz, Hamit, 2022. "Multi objective optimization of HCCI combustion fuelled with fusel oil and n-heptane blends," Renewable Energy, Elsevier, vol. 182(C), pages 827-841.
    13. Wang, Shuofeng & Sun, Yu & Yang, Jinxin & Wang, Huaiyu, 2024. "Effect of excess air ratio and ignition timing on the combustion and emission characteristics of the ammonia-hydrogen Wankel rotary engine," Energy, Elsevier, vol. 302(C).
    14. Duan, Xiongbo & Li, Yangyang & Liu, Jingping & Guo, Genmiao & Fu, Jianqin & Zhang, Quanchang & Zhang, Shiheng & Liu, Weiqiang, 2019. "Experimental study the effects of various compression ratios and spark timing on performance and emission of a lean-burn heavy-duty spark ignition engine fueled with methane gas and hydrogen blends," Energy, Elsevier, vol. 169(C), pages 558-571.
    15. Moradi, Jamshid & Gharehghani, Ayat & Mirsalim, Mostafa, 2020. "Numerical investigation on the effect of oxygen in combustion characteristics and to extend low load operating range of a natural-gas HCCI engine," Applied Energy, Elsevier, vol. 276(C).
    16. Halis, Serdar & Kocakulak, Tolga, 2024. "RSM based optimization of lambda and mixed fuel concentration parameters of an LTC mode engine," Energy, Elsevier, vol. 306(C).
    17. Guan, Wei & Gu, Jinkai & Pan, Xiubin & Pan, Mingzhang & Wang, Xinyan & Zhao, Hua & Tan, Dongli & Fu, Changcheng & Pedrozo, Vinícius B. & Zhang, Zhiqing, 2024. "Improvement of the light-load combustion control strategy for a heavy-duty diesel engine fueled with diesel/methonal by RSM-NSGA III," Energy, Elsevier, vol. 297(C).
    18. Xie, Manyao & Wang, Ying & Zhang, Da & Zhang, Kaibo & Bai, Yuanqi, 2025. "Effects of n-butanol injection timing on mixture stratification, combustion and emission characteristics of n-butanol/diesel dual direct-injection engine," Energy, Elsevier, vol. 326(C).
    19. Gürsoy, Hüseyin Orhun & Solmaz, Hamit & Kocakulak, Tolga & Alp Arslan, Turan & Calam, Alper, 2024. "Enhancement of combustion characteristics of waste alcohol using n-heptane through RSM in an HCCI engine," Energy, Elsevier, vol. 313(C).
    20. Aydoğan, Bilal, 2020. "An experimental examination of the effects of n-hexane and n-heptane fuel blends on combustion, performance and emissions characteristics in a HCCI engine," Energy, Elsevier, vol. 192(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:14:p:10897-:d:1191809. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.